Copier User Manual

9 - 1
9
9
IEC 60825-1 Specification
This machine is a Class 1 laser product as defined
in IEC60825-1:2007 (EN60825-1:F2007)
specifications. The label shown below is attached
in countries where required.
This machine has a Class 3B Laser Diode which
emits invisible laser radiation in the Scanner Unit.
The Scanner Unit should not be opened under any
circumstances.
Laser Diode
Wave length: 770 - 810 nm
Output: 5 mW max.
Laser Class: Class 3B
Disconnect device
This product must be installed near an electrical
socket that is easily accessible. In case of
emergencies, you must disconnect the power cord
from the electrical socket to shut off power
completely.
Radio interference
(220-240V Model only)
This product complies with EN55022 (CISPR
Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use the
following interface cables.
1.A USB cable which must not exceed 2.0 metres
in length.
2.A shielded parallel interface cable with
twisted-pair conductors and that is marked
“IEEE 1284 compliant”. The cable must not
exceed 2.0 metres in length.
Important information for EU
CAUTION
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT