Copier User Manual

Chapter 11
11 - 4
Checking if the machine has faxes in
its memory
1 Press Menu/Set, 9, 0, 1.
2 If the LCD shows No Data, there are no
faxes left in the machine’s memory.
—OR—
If the LCD shows Enter Fax No.
there are faxes in the machine’s
memory.
Note
You can transfer the Fax Journal report to
another fax machine by pressing Menu/Set,
9, 0, 2 in Step 1.
You can transfer the faxes to another fax
machine. See Forwarding faxes to
another fax machine.
Forwarding faxes to another fax
machine
If you have not set up your Station ID you
cannot enter fax forward mode. (See Setting
the Station ID on page 2-2.)
1 Enter the fax number to which the faxes
will be forwarded.
2 Press Start.
Document jams
If the document is jammed, follow the steps
below.
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
1 Open the control panel cover.
2 Carefully pull the jammed document
toward the front of the machine.
3 Close the control panel cover.
Press Stop/Exit.