Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=132 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 5.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=132 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 5.280000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
AdonisC4-AE_copy_F_FM_forPaper.book Page i Thursday, May 12, 2005 4:17 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader/Adobe Reader is necessary to view the manuals as a PDF file.
AdonisC4-AE_copy_F_FM_forPaper.book Page ii Thursday, May 12, 2005 4:17 PM ❖ Scanner Reference (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's scanner function. ❖ Manuals for DeskTopBinder Lite DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner Driver and Document Management Utility”. • DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder Lite in detail.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page vi Thursday, May 12, 2005 4:17 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine.................................................................. iii Notice ...................................................................................................................... 1 How to Read This Manual ................................................
AdonisC4-AE_copy_F_FM_forPaper.book Page vii Thursday, May 12, 2005 4:17 PM Erase........................................................................................................................57 Margin Adjustment ...................................................................................................60 Background Numbering ...........................................................................................61 Preset Stamp ...........................................................
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 1 Thursday, May 12, 2005 4:17 PM Notice Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses. The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy.
AdonisC4-AE_copy_F_FM_forPaper.book Page 2 Thursday, May 12, 2005 4:17 PM How to Read This Manual Symbols The following set of symbols is used in this manual. R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.
AdonisC4-AE_copy_F_FM_forPaper.book Page 3 Thursday, May 12, 2005 4:17 PM Machine Types This machine comes in two models which vary by copy speed. To make sure which model you have, see the inside front cover of this manual.
AdonisC4-AE_copy_F_FM_forPaper.book Page 4 Thursday, May 12, 2005 4:17 PM Functions that Require Options 2 Tray finisher *1 Booklet finisher *1 *1 4 ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ Punch Auto Document Feeder Mixed Size mode ❍ Saddle Stitch SADF ❍ Staple 1000-Sheet finisher *1 Shift Stack Options Auto Document Feeder (ADF) Batch mode Functions Shift Sort The available functions depend on your machine configuration and which options you have. See the table below.
AdonisC4-AE_copy_F_FM_forPaper.book Page 5 Thursday, May 12, 2005 4:17 PM Control Panel Note ❒ This illustration shows the control panel of the machine with options fully installed. AHU023S 1. Screen Contrast knob 6. {Program} key Adjusts the brightness of the display panel. Press to select the program mode. See p.75 “Programs”. 2. Indicators 7. {Clear Modes} key Shows errors and machine status.
AdonisC4-AE_copy_F_FM_forPaper.book Page 6 Thursday, May 12, 2005 4:17 PM 12. {Sample Copy} key Use this key to make a single sample copy before starting a long copy run. By checking the sample copy and making any necessary changes to the image quality settings before you make multiple copies, you can save time and paper. See p.35 “Sample copy”. 13. {Start} key Press to start copying. Press to start scanning and printing in Document Server mode. 14.
AdonisC4-AE_copy_F_FM_forPaper.book Page 7 Thursday, May 12, 2005 4:17 PM Display Panel Note ❒ The following illustrations are examples for the machine with the optional 2 Tray finisher and Large Capacity Tray (LCT) installed. ❖ Initial copy display AHU007S 1. Original mode, Image Density and Special Original mode. 2. Operational status or messages. 3. You can register up to three frequently used reduce/enlarge ratios other than the fixed reduce/enlarge ratios. See p.95 “Shortcut R/E”. 4.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 9 Thursday, May 12, 2005 4:17 PM 1.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 11 Thursday, May 12, 2005 4:17 PM Originals ❖ Exposure glass Positioning mark 1 Maximum scanning area mm) mm) GCSIZE1E ❖ ADF Maximum scanning area mm) GCSIZE2E Note ❒ When you copy custom size originals, make sure you specify the size of the originals. If not, the image may not be copied properly. See p.16 “Placing custom size originals”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 12 Thursday, May 12, 2005 4:17 PM Placing Originals Placing Originals Note ❒ Take care to place originals after any correction fluid and ink has completely dried. Not taking this precaution could cause marks on the exposure glass that will be copied onto paper. 1 For example, to copy A3Kor 11" × 17"K originals with the Staple function selected: Reference For original sizes you can set, see p.9 “Originals” .
AdonisC4-AE_copy_F_FM_forPaper.book Page 13 Thursday, May 12, 2005 4:17 PM Placing Originals B Select the original orientation. Standard orientation A Make sure that ed. is select- Placing Originals on the Exposure Glass A Lift 1 the exposure glass cover or ADF. Important ❒ Do not lift the exposure glass cover or ADF forcefully. Otherwise, the cover of the ADF might open or be damaged. 90° turn A Place your original in the landscape orientation, and then press .
AdonisC4-AE_copy_F_FM_forPaper.book Page 14 Thursday, May 12, 2005 4:17 PM Placing Originals Placing Originals in the Auto Document Feeder 1 Settings should be made in the following situations: A Set the document guide to the original size. B Align the edges of the original and place it on the ADF with the side to be copied facing up. ❖ When placing originals one by one: p.15 “SADF mode” ❖ When placing originals consisting of more than 80 pages: p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 15 Thursday, May 12, 2005 4:17 PM Placing Originals B Select [Batch], and then press [OK]. Note ❒ When [Batch] is not displayed, change the settings. See p.102 “Switch to Batch (SADF)”. C Place the first part of the original, and then press the {Start} key. D After the first part of the original has been fed, place the next part. E When the Sort, Combine or 1 Sided→2 Sided mode has been set, press the {#} key after all originals have been scanned.
AdonisC4-AE_copy_F_FM_forPaper.book Page 16 Thursday, May 12, 2005 4:17 PM Placing Originals A Press [Special Original]. Placing custom size originals When placing custom size originals in the ADF, specify the size of the originals. 1 B Press [Mixed Size], and then press [OK]. C Align the rear and left edges of Note ❒ Paper that has a vertical length of 128–297 mm (5"–11") and a horizontal length of 128–1,260 mm (5"– 49") can be placed with this function. A Press [Special Original].
AdonisC4-AE_copy_F_FM_forPaper.book Page 17 Thursday, May 12, 2005 4:17 PM 2. Copying Basic Procedure Preparation When User Code Authentication is set, the screen for entering a user code will be displayed. Enter your user code using the number keys, and then press the {#} key. For user codes, see "Authentication Information", General Settings Guide. C Place your originals. Reference p.12 “Placing Originals” D Set your desired settings. Reference Please refer to each function.
AdonisC4-AE_copy_F_FM_forPaper.book Page 18 Thursday, May 12, 2005 4:17 PM Copying -How to operate ❖ To stop the machine during a multicopy run. Press the {Clear/Stop} key. ❖ To return the machine to the initial condition after copying. Press the {Clear Modes} key. 2 ❖ When clearing entered values. Press the {Clear/Stop} key or [Clear] on the display. ❖ To check the settings. Press the {Check Modes} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 19 Thursday, May 12, 2005 4:17 PM Basic Procedure Job Preset You can set up the next copy content during copying. If a long copy job is in progress and you do not want to wait for it to finish, you can use this function to set up the next copy job in advance. When the current copy job is finished, the next job will start automatically. 2 A Press [Next Job] when "Copying" is shown. B Set up the next copy job.
AdonisC4-AE_copy_F_FM_forPaper.book Page 20 Thursday, May 12, 2005 4:17 PM Copying Copying from the Bypass Tray Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, postcards and copy paper that cannot be loaded in the paper trays. 2 Preparation When the duplex unit is attached, the default is [1 Sided→2 Sided]. When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series] (for example [1 Sided→1 Sided] or [2 Sided→1 Sided] ).
AdonisC4-AE_copy_F_FM_forPaper.book Page 21 Thursday, May 12, 2005 4:17 PM Copying from the Bypass Tray B Insert the paper with the side you want to copy facing down until you hear the beep, and then align the paper guide to the paper size. C Select the type and size of the paper. When copying onto standard size paper A Press the {#} key. B Press [Select Size]. 2 ZDSH100J 1. Extender Note ❒ If the guides are not flush against the copy paper, images might be skewed or paper misfeeds might occur.
AdonisC4-AE_copy_F_FM_forPaper.book Page 22 Thursday, May 12, 2005 4:17 PM Copying Note ❒ If [Horiz mm] is not highlighted, press [Horiz mm]. ❒ To register the custom size entered, press [Program], and then press [Exit]. 2 E Press [OK]. When copying onto special paper A Press the {#} key. B Select paper type in Special paper. C Press [OK]. D Place your originals, and then press the {Start} key. Note ❒ When copying onto OHP transparencies, remove copied sheets one by one.
AdonisC4-AE_copy_F_FM_forPaper.book Page 23 Thursday, May 12, 2005 4:17 PM Copier Functions Copier Functions Adjusting Image Density There are three types of adjustment available: ❖ Auto Image Density The machine automatically adjusts image density. Manual image density A Press [Auto Image Density] to cancel it. 2 B Press [Lighter] or [Darker] to adjust the image density. ❖ Manual image density You can adjust the density of the overall original in seven increments.
AdonisC4-AE_copy_F_FM_forPaper.book Page 24 Thursday, May 12, 2005 4:17 PM Copying Selecting Original Type Setting When the original type keys are not displayed Select one of the following six types to match your originals: A Press [Original Type]. B Select the original type, and then press [OK]. ❖ Text Select this mode when your originals contain only text (no pictures). 2 ❖ Text/Photo Select [Text/Photo] when your originals contain photographs or pictures with text.
AdonisC4-AE_copy_F_FM_forPaper.book Page 25 Thursday, May 12, 2005 4:17 PM Copier Functions Selecting Copy Paper There are two ways to select copy paper: ❖ Auto Paper Select The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio. 2 ❖ Manual Paper Select Choose the tray containing the paper you want to copy onto: a paper tray, bypass tray or LCT. Reference p.11 “Sizes difficult to detect” p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 26 Thursday, May 12, 2005 4:17 PM Copying Auto Paper Select A Make sure that [Auto Paper Select] is selected. 2 Note ❒ Trays with a key mark will not be automatically selected. See “Paper Type” in “Tray Paper Settings”, General Settings Guide. Manual Paper Select A Select the paper tray, bypass tray or the LCT. The indicator corresponding to the selected paper tray is highlighted. Reference p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 27 Thursday, May 12, 2005 4:17 PM Copier Functions -Rotated copy If the orientation in which your original is placed (L or K) is different from that of the paper you are copying onto, this function rotates the original image by 90° to fit it on the copy paper. This function works when Auto Paper Select or Auto Reduce/Enlarge is selected. See p.25 “Auto Paper Select”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 28 Thursday, May 12, 2005 4:17 PM Copying A Press [Reduce/Enlarge]. Preset Reduce/Enlarge You can select a preset ratio for copying. 2 ❖ Base Point The base point of Reduce/Enlarge differs depending on how the original is scanned. When the original is placed on the exposure glass, the upper left corner will be the base point. When it is placed in the ADF, the bottom left corner will be the base point.
AdonisC4-AE_copy_F_FM_forPaper.book Page 29 Thursday, May 12, 2005 4:17 PM Copier Functions A Press [Create Margin] displayed on the initial display. B Enter the ratio. To select the ratio with [n] and [o] A Select a preset ratio close to the desired ratio by using [Reduce] or [Enlarge]. B Adjust the ratio with [n] or [o]. B If you do not want to combine it with the Reduce/Enlarge function, place your originals, and then press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 30 Thursday, May 12, 2005 4:17 PM Copying Auto Reduce/Enlarge The machine can choose an appropriate reproduction ratio based on the paper and original sizes you select. Reference p.11 “Sizes difficult to detect” A Press [Auto Reduce/Enlarge]. 2 Note ❒ You cannot use the bypass tray with this function. ❒ When using Auto Reduce/Enlarge, see the following table for original sizes and orientations you can use: B Select the paper tray.
AdonisC4-AE_copy_F_FM_forPaper.book Page 31 Thursday, May 12, 2005 4:17 PM Copier Functions B Press [Specifd. Ratio]. C Make sure that [Specifd. Ratio] is highlighted. D Enter the length of the original with the number keys, and then press the [#] key. Directional Magnification (%) Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically. 2 Note ❒ You can enter sizes within the following ranges: Metric 1–999 mm version (in increments of 1 mm) 0.1"–99.
AdonisC4-AE_copy_F_FM_forPaper.book Page 32 Thursday, May 12, 2005 4:17 PM Copying D Enter the desired ratio with the number keys, followed by [#]. E Press [OK]. To specify a ratio with [n] and [o] A Press [With no]. B Press [Horizontal]. C Adjust the ratio using [n] or [o]. 2 Note ❒ Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in increments of 10%. ❒ If you have incorrectly entered the ratio, readjust the ratio with [n] or [o].
AdonisC4-AE_copy_F_FM_forPaper.book Page 33 Thursday, May 12, 2005 4:17 PM Copier Functions A Press [Reduce/Enlarge]. Sort The machine can scan originals into memory and automatically sort copies. Reference Related initial settings B Press [Specifd. Ratio]. C Press [Dir. Size Mag mm]. D Enter the horizontal size of the original with the number keys, and then press [#]. E Enter the horizontal size of the copy with the number keys, and then press [#]. 2 p.103 “Select Stack Function” p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 34 Thursday, May 12, 2005 4:17 PM Copying ❖ Shift Sort • 1000-Sheet finisher (optional) Each time the copies of one set or those of each job are delivered, the next copy is shifted when delivered so you can separate each set or job. • 2 Tray finisher (optional) The shift tray moves backward or forward each time the copies of one set or those of each job are delivered, causing the next copy to shift when delivered so that you can differentiate each set or job.
AdonisC4-AE_copy_F_FM_forPaper.book Page 35 Thursday, May 12, 2005 4:17 PM Copier Functions Note ❒ When placing an original on the exposure glass, start with the first page to be copied. When placing an original in the ADF, set so the first page is on the top. ❒ When placing an original on the exposure glass or in the ADF using Batch mode, press the {#} key after all the originals have been scanned. D Press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 36 Thursday, May 12, 2005 4:17 PM Copying B Enter the number of copies with Stack the number keys. Copies can be assembled with each page placed. • 1000-Sheet finisher (optional) Each time the copies of one page are delivered, the next copy is shifted when delivered so you can separate each job by page.
AdonisC4-AE_copy_F_FM_forPaper.book Page 37 Thursday, May 12, 2005 4:17 PM Copier Functions Staple An optional finisher and the bridge unit are required for this function. Each copy set can be stapled together. 2 Note ❒ You cannot use the bypass tray with this function. Reference Related initial settings p.103 “Select Stapling Position” Stapling position and original setting Place all the originals in the ADF in the orientation in which they can be read normally.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 41 Thursday, May 12, 2005 4:17 PM Copier Functions Original location Stapling position Exposure glass ADF *1 STAPLEDE Left 2 K *2 2 L STAPLE31 STAPLE32 STAPLE33 STAPLE22ADA STAPLE23ADA STAPLE24ADA STAPLEEE Top 2 K L *2 STAPLE10ADA STAPLE14ADA STAPLE20ADA STAPLE34 STAPLE35 STAPLE36 STAPLE37 STAPLE38 STAPLE39 STAPLEFE *1 *2 Saddle Stitch L K This table shows the stapling positions, not the orientation of delivery.
AdonisC4-AE_copy_F_FM_forPaper.book Page 42 Thursday, May 12, 2005 4:17 PM Copying A Select one of the stapling positions. ❖ 1000-Sheet finisher 2 ❖ 2 Tray finisher ❖ Booklet finisher Note ❒ When you select the stapling position, Sort mode is automatically selected. Reference p.37 “Stapling position and original setting” B Enter the number of copy sets with the number keys. C Place your originals, and then press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 43 Thursday, May 12, 2005 4:17 PM Copier Functions Punch The optional 2 Tray finisher and the bridge unit are required for this function. You can make punch holes in copies. ❖ 2 holes 2 GCPNCH1E ❖ 3 holes GCPNCH3E ❖ 4 holes GCPNCH0E Note ❒ You cannot use the bypass tray with this function.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 45 Thursday, May 12, 2005 4:17 PM Copier Functions Original location Exposure glass 2 holes ADF Punch hole positions *1 K L 90º Turn 3 holes 2 K L 4 holes K L *1 This table shows the punch hole positions, not the orientation of delivery. A Select one of the punch hole positions. B Enter the number of copy sets with the number keys. C Place your originals, and then press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 46 Thursday, May 12, 2005 4:17 PM Copying Duplex Original orientation and completed copies There are three types of duplex. The resulting copy image will differ according to the orientation in which you place your originals (vertical K or horizontal L ). ❖ 1 Sided→2 Sided Copies 2 one-sided pages on 1 twosided page. 2 ❖ 2 Sided→2 Sided Copies 1 two-sided page on 1 twosided page.
AdonisC4-AE_copy_F_FM_forPaper.book Page 47 Thursday, May 12, 2005 4:17 PM Copier Functions A Press [Dup./Combine/Series]. ❒ When placing an original on the exposure glass or in the ADF using Batch mode, press the {#} key after all the originals have been scanned. Originals and copy orientation 2 You can select the orientation. • Top to Top Note ❒ You can also select “1 Sided to 2 Sided” or ”2 Sided to 2 Sided”directly by pressing the Copy Function Key. In that case, proceed to D.
AdonisC4-AE_copy_F_FM_forPaper.book Page 48 Thursday, May 12, 2005 4:17 PM Copying Open to top S originals One-Sided Combine Combine several pages onto one side of a sheet. ❖ 1 Sided 2 Pages → Combine 1 Side Copies 2 one-sided originals to one side of a sheet. 2 GCSHUY2E ❖ Placing originals (originals placed in the ADF) • Originals read from left to right 1 2 3 4 1 2 3 4 Combine5 GCSHVY7E ❖ 1 Sided 8 Pages → Combine 1 Side Copies 8 one-sided originals to one side of a sheet.
AdonisC4-AE_copy_F_FM_forPaper.book Page 49 Thursday, May 12, 2005 4:17 PM Copier Functions A Press [Dup./Combine/Series]. Two-Sided Combine Combines various pages of originals into one sheet with two sides. ❖ 1 Sided 4 Pages → Combine 2 Side Copies 4 one-sided originals to one sheet with two pages per side. 2 B Press [1 Sided] or [2 Sided] for Original, and then press [Combine 1 Side] for Copy.
AdonisC4-AE_copy_F_FM_forPaper.book Page 50 Thursday, May 12, 2005 4:17 PM Copying ❖ 1 Sided 16 Pages → Combine 2 Side Copies 16 one-sided originals to one sheet with eight pages per side. ❖ 2 Sided 16 Pages → Combine 2 Side Copies 8 two-sided originals to one sheet with eight pages per side. 2 GCSHVY6E GCSHVY5E Reference Related initial settings 1. Front 2. Back ❖ 2 Sided 4 Pages → Combine 2 Side Copies 2 two-sided originals to one sheet with two pages per side. p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 51 Thursday, May 12, 2005 4:17 PM Copier Functions Reference p.47 “Originals and copy orientation” C Select the number of originals to ❖ Book→2 Sided Copies a two-page spread original onto one sheet with one page per side. combine, and then press [OK]. D Select the paper size. E Press [OK]. F Place your originals, press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 52 Thursday, May 12, 2005 4:17 PM Copying ❖ Inch version Paper for one-sided copy Paper for two-side copy 11" × 17"L 81/2" × 11"K × 2 sheets 81/2" × 11"K × 1 sheet (twosided) 81/2" × 11"L 51/2" × 81/2"K × 2 sheets 51/2" × 11"K × 1 sheet (twosided) Original 2 Booklet/Magazine Copies two or more originals in page order. ❖ 1 Sided→Booklet Make copies in page order for a folded booklet as shown. ❖ Open to left A Press [Dup./Combine/Series].
AdonisC4-AE_copy_F_FM_forPaper.book Page 53 Thursday, May 12, 2005 4:17 PM Copier Functions ❖ Open to right ❖ Open to left 2 GCAH030E GCAH020E ❖ 1 Sided→Magazine Copies two or more originals to make copies in page order when they are folded and stacked.
AdonisC4-AE_copy_F_FM_forPaper.book Page 54 Thursday, May 12, 2005 4:17 PM Copying How to fold and unfold copies to make a magazine D Press [Book]. E Select [1 Sided→Booklet], [2 Sided→Booklet], [1 Sided→Magazine] or [2 Sided→Magazine], and then press [OK]. F Press [OK]. G Select the paper. H Place your originals, 2 press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 55 Thursday, May 12, 2005 4:17 PM Copier Functions ❖ Original: A5K / Copy paper: A4K or Original: A5L / Copy paper A4L 4 repeats (71%) G Place your original, and then press the {Start} key. 16 repeats (35%) Double Copies One original image is copied twice on one copy as shown.
AdonisC4-AE_copy_F_FM_forPaper.book Page 56 Thursday, May 12, 2005 4:17 PM Copying ❒ The originals of size A5L, B6 JISKL, 51/2" × 81/2"L cannot be detected properly on the exposure glass. Be sure to select the copy paper manually or place the originals in the ADF. ❖ Metric version Reference Related initial settings 2 Note ❒ You cannot use the bypass tray with this function. ❒ The original sizes and orientations for centring are listed below. p.98 “Double Copies Separation Line” A Press [Edit/Stamp].
AdonisC4-AE_copy_F_FM_forPaper.book Page 57 Thursday, May 12, 2005 4:17 PM Copier Functions Positive/Negative If your original is black and white, copy images are inverted. ❖ Border This mode erases the edge margin of the original image. 2 GCCENT2E GCHATN1E A Press [Edit/Stamp]. B Press [Edit Image]. C Press [Positive/Negative]. D Press [OK]. E Press [OK]. F Select the paper. G Place your originals, press the {Start} key. ❖ Centre This mode erases the centre margin of the original image.
AdonisC4-AE_copy_F_FM_forPaper.book Page 58 Thursday, May 12, 2005 4:17 PM Copying Reference The erase width is set to 10 mm (0.4”) as a default. You can change this setting with User Tools. C Set the erase border width. Selecting [Same Width] A Press [Same Width]. p.97 “Erase Centre Width” p.97 “Erase Border Width” 2 Note ❒ The relationship between the original orientation and the erased part is as follows: L original K original B Set an erase border width with [n] and [o].
AdonisC4-AE_copy_F_FM_forPaper.book Page 59 Thursday, May 12, 2005 4:17 PM Copier Functions Centre erase A Press [Edit/Stamp]. D Set the border to be erased. Selecting [Same Width] A Press [Same Width]. 2 B Press [Erase]. C Press [Centre]. D Set the erase centre width with [n] and [o], and then press [OK]. E Press [OK]. F Place your originals, and then press the {Start} key. B Press [Centre], and then set the erase centre width with [n] and [o].
AdonisC4-AE_copy_F_FM_forPaper.book Page 60 Thursday, May 12, 2005 4:17 PM Copying Margin Adjustment You can shift the image to the left, right, top, or bottom to make a binding margin. C Set a binding margin for a front page. Press [←] and [→] when setting the left and right margins, and [↓] and [↑] when setting the top and bottom margins. Note ❒ To change the value entered, press [←], [→], [↓], [↑] to set the new value.
AdonisC4-AE_copy_F_FM_forPaper.book Page 61 Thursday, May 12, 2005 4:17 PM Copier Functions G Place your originals, and then press the {Start} key. Background Numbering Use this function to have numbers printed on the background of copies. It can help you to keep track of confidential documents. Preset Stamp Messages used frequently can be stored in memory and stamped on copies. 2 GCSTMP2E Note ❒ You can enter a number between 1 and 999. Reference Related initial settings p.99 “Size” p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 62 Thursday, May 12, 2005 4:17 PM Copying Stamp position and original orientation D Select the desired message. E Press [All Pages] or [1st Page only] to select the print page. Note ❒ You can change the position, size, and density of the stamp. See p.62 “Changing the stamp position, size and density”. 2 F After you specify all desired settings, press [OK]. G Press [OK]. H Place your originals, and then press the {Start} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 63 Thursday, May 12, 2005 4:17 PM Copier Functions Stamp position and original orientation D Select the stamp you require. E Press [All Pages] or [1st Page only] to select the print page. 2 Note ❒ You can change the stamp position. See p.63 “To change the stamp position”. F After making all settings, press [OK]. GCSTMP6E Note ❒ You cannot use the bypass tray with this function. ❒ Only one message can be stamped each time.
AdonisC4-AE_copy_F_FM_forPaper.book Page 64 Thursday, May 12, 2005 4:17 PM Copying A Make sure that the machine is in copier mode. B Press the {User Tools/Counter} key. J Enter the horizontal size of the stamp with the number keys, and then press [#]. K Press [Vertical], and then enter the vertical size in the same way as step J. 2 C Press L Place the original for user stamp [Copier/Document Server Fea- tures]. on the exposure glass, and then press [Start Scanning].
AdonisC4-AE_copy_F_FM_forPaper.book Page 65 Thursday, May 12, 2005 4:17 PM Copier Functions C Press [Copier/Document Server Fea- tures]. You can select from the following styles: • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY • DD.MM.YYYY • YYYY.MM.DD 2 Stamp position and original orientation D Press [Stamp]. E Press [User Stamp]. F Press [Program/Delete Stamp]. G Press [Delete], and then press the stamp number you want to delete. H Select [Delete], and then press [Exit]. I Press [Exit].
AdonisC4-AE_copy_F_FM_forPaper.book Page 66 Thursday, May 12, 2005 4:17 PM Copying A Press [Edit/Stamp]. To change the style of date A Press [Change Format]. 2 B Press [Stamp]. C Press [Date Stamp]. D Press [All Pages] or [1st Page only] to B Select the date format, and then press [OK]. select the print page. To change the stamp position A Press [Change]. Note ❒ You can change the font and position of the date to be stamped. See p.66 “To change the style of date”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 67 Thursday, May 12, 2005 4:17 PM Copier Functions There are six types of Page Numbering (n is the total number of pages in your original): • P1, P2,…Pn • 1/n, 2/n,...n/n • -1-, -2-,...-n• P.1, P.2 ...P.n • 1, 2…n • 1-1, 1-2,..1-n Stamp position and original orientation GCSTMP8E Note ❒ You cannot use the bypass tray with this function. Reference Related initial settings p.101 “Font” p.101 “Size” p.102 “Superimpose” p.101 “Stamp Format” p.
AdonisC4-AE_copy_F_FM_forPaper.book Page 68 Thursday, May 12, 2005 4:17 PM Copying Specifying the first printing page and start number Note ❒ The example below shows when the first printing page is “2”and the start number is “3”. If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, ) 2 Note ❒ Below explains the example when (P1, P2...) is selected. The steps are the same for other cases. A Press [Change] on the right side.
AdonisC4-AE_copy_F_FM_forPaper.book Page 69 Thursday, May 12, 2005 4:17 PM Copier Functions If you selected (1/5, 2/5…) A Press [Change] on the right side. B Press [First Printing Page], enter the o r i g i n a l s h e e t n um b e r from which to start printing, and then press the {#} key. ❒ The last number is the last page number to print. For example, if [Total Pages] is ten, if you want to print up to seven pages and do not want to print from page 8 on, enter [7] for [Last Number].
AdonisC4-AE_copy_F_FM_forPaper.book Page 70 Thursday, May 12, 2005 4:17 PM Copying C Press [First Chapter No.], enter the chapter number from which to start numbering with the number keys, and then press the {#} key. Note ❒ You can enter between 1 and 9999 for the chapter number from which to start numbering. 2 ❖ Front cover The first page of your originals is copied on specific paper sheet for covers, or a cover sheet is inserted before the first copy.
AdonisC4-AE_copy_F_FM_forPaper.book Page 71 Thursday, May 12, 2005 4:17 PM Copier Functions A Press [Cover/Slip Sheet]. Note ❒ The slip sheets should be the same size and orientation as the copy paper. ❒ You cannot place the copy paper in the bypass tray. ❒ You can specify the pages up to 20. 2 A Press [Cover/Slip Sheet]. B Press [Front Cover] or [Front/Back Cover]. C Select [Copy] or [Blank] for the cover sheet.
AdonisC4-AE_copy_F_FM_forPaper.book Page 72 Thursday, May 12, 2005 4:17 PM Copying Chapter The page locations you specify with this function will appear on the front of copy sheets. Preparation Before selecting this function, press [Dup./Combine/Series] and select Duplex (1 Sided→2 Sided) mode or Combine mode. 2 Note ❒ This function can be used only w h e n y o u u se t h e D u p l e x ( 1 Sided→2 Sided) or Combine function. ❒ You can specify the pages up to 20. A Press [Cover/Slip Sheet].
AdonisC4-AE_copy_F_FM_forPaper.book Page 73 Thursday, May 12, 2005 4:17 PM Copier Functions ❖ When using OHP transparencies placed in the bypass tray • Copy 12 2 • Blank 12 Note ❒ Press the {#} key and select [OHP Sheet] in Special paper. See p.22 “When copying onto special paper”. A Press [Cover/Slip Sheet]. B Press [Slip Sheet]. C Select [Copy] or [Blank], and then press [OK]. D Select the paper tray containing the sheet paper to copy the originals.
AdonisC4-AE_copy_F_FM_forPaper.book Page 74 Thursday, May 12, 2005 4:17 PM Copying Storing Data in the Document Server The Document Server enables you to store documents in the memory and print them as you want. Important ❒ Data stored in the machine might be lost if some kind of failure occurs. The manufacturer shall not be responsible for any damage that might result from the loss of data. 2 Note ❒ Data stored in the Document Server is set to be deleted after three days by the factory default.
AdonisC4-AE_copy_F_FM_forPaper.book Page 75 Thursday, May 12, 2005 4:17 PM Programs Programs You can store frequently used copy job settings in the machine memory and recall them for future use. C Press [Register]. 2 Storing a Program Note ❒ You can store up to 10 programs. ❒ You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or reset, or immediately after the operation switch is turned on. See p.94 “Change Initial Mode”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 76 Thursday, May 12, 2005 4:17 PM Copying F Press [OK]. When the settings are successfully stored, m appears on the left side and the program name appears on the right side of the registered program number. The display returns to the initial copy display for a while. 2 Changing a Stored Program D Press [Yes]. The program is deleted, and the display returns to the initial copy display. Recalling a Program A Press the {Program} key. B Press [Recall].
AdonisC4-AE_copy_F_FM_forPaper.book Page 77 Thursday, May 12, 2005 4:17 PM 3. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Is Displayed The following chart contains explanations for the common messages. If other messages appear, follow the instructions as they are displayed. Note ❒ For messages that are not listed here, see General Settings Guide. Message Causes Solutions Cannot detect original size. Improper original is placed. See p.11 “Sizes difficult to detect”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 78 Thursday, May 12, 2005 4:17 PM Troubleshooting 3 Message Causes Solutions Maximum number of sets is *. The number of copies exceeds the maximum copy quantity. You can change the maximum copy quantity. See p.94 “Max. Copy Quantity”. Original is being scanned by another function. The Document Server func- To cancel the job in process, press tion is in use. [Exit], and then press the {Document Server} key. Next, press the {Clear/Stop} key.
AdonisC4-AE_copy_F_FM_forPaper.book Page 79 Thursday, May 12, 2005 4:17 PM If You Cannot Make Clear Copies If You Cannot Make Clear Copies Problem Causes Solutions Copies appear dirty. Image density is too dark. Adjust the image density. See p.23 “Adjusting Image Density”. Auto Image Density is not selected. Adjust the auto density. See p.23 “Adjusting Image Density”. The reverse side of an orig- Image density is too dark. inal image is copied.
AdonisC4-AE_copy_F_FM_forPaper.book Page 80 Thursday, May 12, 2005 4:17 PM Troubleshooting If You Cannot Make Copies As You Want This section explains causes and remedies when copy results are not as expected. ❖ Basic Problem Causes Solutions Copies are not stapled. There are jammed staples in the stapler. Remove jammed staples. See General Settings Guide. 3 Note ❒ After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.
AdonisC4-AE_copy_F_FM_forPaper.book Page 81 Thursday, May 12, 2005 4:17 PM If You Cannot Make Copies As You Want ❖ Edit Problem Causes Solutions In Double Copies mode, parts of the original image are not copied. Combination of original and copy paper is not correct. Select A3L for A4 K originals and A4 for A5 originals. In Border, Centre, or Centre/Border mode, parts of the original image are not copied. You set a wide erased mar- Make the margin width narrower. gin.
AdonisC4-AE_copy_F_FM_forPaper.book Page 82 Thursday, May 12, 2005 4:17 PM Troubleshooting ❖ Combine Problem Causes You cannot make a book from Booklet or Magazine mode by folding copies. Change the setting. You selected a setting (“Open to left”or “Open to right”) that does not match the orientation of originals. When using Combine, parts of the image are not copied. You specified a reproduction ratio that does not match the sizes of your originals and copy paper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 83 Thursday, May 12, 2005 4:17 PM If You Cannot Make Copies As You Want When Memory Is Full Note ❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.103 “Memory Full Auto Scan Restart” ) to [Yes], even if the memory becomes full, the memory overflow message will not be displayed. The machine will make copies of the scanned originals first, then automatically proceed scanning and copying the remaining originals.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 85 Thursday, May 12, 2005 4:17 PM 4. User Tools (Copier/Document Server Features) User Tools Menu (Copier/Document Server Features) User Tools Item Names Default 1 General Features P.1/4 (See p.92 “General Features P. /4”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 86 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) User Tools Item Names Default General Features P.3/4 (See p.94 “General Features P.3/4”.) • F1: 1 Sided→2 Sided: T to T Copy Function Key: F1–F5 • F2: 2 Sided: T to T→2 Sided: T to T • F3: 1 Sided→1 Sided Combine • F4: 1 Sided→1 Sided Combine: 4 originals • F5: Create Margin General Features P.4/4 (See p.95 “General Features P.4/4”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 87 Thursday, May 12, 2005 4:17 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Default Reproduction Ratio P.2/2 (See p.96 “Reproduction Ratio P.2/2”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 88 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) User Tools Item Names Default Edit P.2/2 (See p.98 “Edit P.2/2”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 89 Thursday, May 12, 2005 4:17 PM User Tools Menu (Copier/Document Server Features) User Tools Item Names Date Stamp Default Format Metric version: DD/MM/YYYY Inch version: MM/DD/YYYY Font Font 1 Stamp Position Metric version • Position: Top Left • Top Margin: 8 mm • Left Margin: 32 mm Inch version • Position: Top Left 4 • Top Margin: 0.3" • Left Margin: 0.
AdonisC4-AE_copy_F_FM_forPaper.book Page 90 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) User Tools Item Names Page Numbering Default Stamp Format P1, P2... Font Font 1 Size Auto Duplex Back Page Stamping Position Opposite Position Page Numbering in Combine Per Original Stamp on Designating Slip Sheet No Stamp Position Metric version • Position P1, 1/5, P.1, 1: Top Right -1-, 1-1: Bottom Centre 4 • Top/Bottom Margin P1, 1/5, P.
AdonisC4-AE_copy_F_FM_forPaper.book Page 91 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) Accessing User Tools (Copier/Document Server Features) This section is for key operators in charge of this machine. You can change or set defaults. Note ❒ Be sure to quit User Tools and return to the initial copy display after all the settings are finished. This section describes system settings that you can set for the copier. ❒ The selected key is highlighted.
AdonisC4-AE_copy_F_FM_forPaper.book Page 92 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) General Features P.1/4 ❖ Auto Paper Select Priority As a default, Auto Paper Select is selected. You can cancel this setting. See p.25 “Selecting Copy Paper”.
AdonisC4-AE_copy_F_FM_forPaper.book Page 93 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) ❖ Auto Image Density Priority Set this function to use Auto Image Density when the power is turned on, reset or modes are cleared. Note ❒ Default: Text: On, Text/Photo: On, Photo: Off, Pale: On, Generation Copy: On ❖ Copy Quality You can adjust the quality level of copies for each of the original types (Text, Text/Photo, Photo, Pale, Generation Copy).
AdonisC4-AE_copy_F_FM_forPaper.book Page 94 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) General Features P.2/4 ❖ Duplex Mode Priority You can select the type of Duplex function effective when the machine is turned on, reset, or modes are cleared. Note ❒ Default: Text: Normal, Text/Photo: Normal, Photo: Normal, Pale: Normal, Generation Copy: Normal ❖ Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies.
AdonisC4-AE_copy_F_FM_forPaper.book Page 95 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) Note ❒ Default: • Copy Function Key: F1: 1 Sided→2 Sided: T to T • Copy Function Key: F2: 2 Sided: T to T→2 Sided: T to T • Copy Function Key: F3: 1 Sided→1 Sided Combine • Copy Function Key: F4: 1 Sided → 1 Sided Combine: 4 originals • Copy Function Key: F5: Create Margin General Features P.
AdonisC4-AE_copy_F_FM_forPaper.book Page 96 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) ❖ Priority Setting: Enlarge You can set the ratio with priority when [Reduce/Enlarge] is pressed, followed by [Enlarge]. Note ❒ Default: • Metric version: 141% • Inch version: 155% Reproduction Ratio P.2/2 ❖ Reduce 1-6 You can customize available reduction ratios by pressing [Reduce/Enlarge] followed by [Reduce].
AdonisC4-AE_copy_F_FM_forPaper.book Page 97 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) ❖ Front Margin: Left/Right You can specify left and right margins on the front side of copies in Margin Adjustment mode. Note ❒ Default: • Metric version: Left 5 mm • Inch version: Left 0.2" ❖ Back Margin: Left/Right You can specify left and right margins on the back side of copies in Margin Adjustment mode.
AdonisC4-AE_copy_F_FM_forPaper.book Page 98 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) Edit P.2/2 Note ❒ The image area of approximately 1.5 mm (0.06”) wide on the separation line may not be copied, when specifying solid or broken lines. ❖ Image Repeat Separation Line You can select a separation line in Image Repeat mode from None, Solid, Broken A, Broken B, or Crop Marks.
AdonisC4-AE_copy_F_FM_forPaper.book Page 99 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) ❖ Copy Order in Combine You can set the copy order in Combine mode to Left to Right or Top to Bottom. • Crop Marks Note ❒ Default: None ❖ Copy on Designating Paper You can specify whether to copy on the designating paper. Note ❒ Default: Yes ❖ Front Cover Copy in Combine You can make a combined copy on the front cover sheet when you select Front Cover mode.
AdonisC4-AE_copy_F_FM_forPaper.book Page 100 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) ❖ Stamp Language You can select the language of the message printed in Stamp mode. Note ❒ Default: English ❖ Stamp Position You can set the position at which the stamp is printed. Press the arrow keys to adjust the position. Note ❒ Default: • Metric Version: • Position: Top right • Top Margin: 24 mm • Right Margin: 24 mm • Inch Version: • Position: Top right • Top Margin: 1.
AdonisC4-AE_copy_F_FM_forPaper.book Page 101 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) ❖ Stamp Format 1 - 4 You can adjust the print page for User Stamps 1 to 4 already registered. • Page to Stamp Sets whether to print the stamp on all pages or only on the first page. Note ❒ Default: All Pages Date Stamp ❖ Format You can select the date format for Date Stamp mode.
AdonisC4-AE_copy_F_FM_forPaper.book Page 102 Thursday, May 12, 2005 4:17 PM User Tools (Copier/Document Server Features) Note ❒ Default: Opposite Position ❖ Page Numbering in Combine You can set page numbering when using the Combine function and the Page Numbering function together. Note ❒ Default: Per original ❖ Stamp on Designating Slip Sheet You can select to print the page number onto slip sheets when using the Designate function set to [Copy] and the Page Numbering function together.
AdonisC4-AE_copy_F_FM_forPaper.book Page 103 Thursday, May 12, 2005 4:17 PM Accessing User Tools (Copier/Document Server Features) ❖ Auto Sort You can specify whether Sort mode is selected when the machine is turned on or the mode is cleared. Note ❒ Default: No ❖ Memory Full Auto Scan Restart When memory becomes full while scanning originals, the machine can make copies of scanned originals first, and then automatically proceed scanning remaining originals. You can enable or disable this function.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 105 Thursday, May 12, 2005 4:17 PM 5. Specifications Combination Chart The combination chart given below shows which modes can be used together. When you read the chart, see the following table: ❍ These modes can be used together. $ These modes cannot be used together. The second mode selected will be the mode you are working in. × These modes cannot be used together. The first mode selected will be the mode you are working in.
AdonisC4-AE_copy_F_FM_forPaper.book Page 106 Thursday, May 12, 2005 4:17 PM Specifications Supplementary Informations ❖ Mixed Size mode • Since small originals may not be correctly aligned with the original guide, the copy image may be slanted. • Copying speed and scanning speed will be reduced. • You can place originals of two different sizes at a time.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 109 Thursday, May 12, 2005 4:17 PM Supplementary Informations Paper size and orientation 2 Tray finisher Paper capacity and weight Finisher shift tray 1 A4KL, 81/2" × 11"KL, A5K, B5 JISKL 500 sheets (80 g/m2) (20 lb.) A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 250 sheets (80 g/m2) (20 lb.) A5L, 51/2"×81/2"KL 100 sheets (80 g/m2) (20 lb.) Finisher shift tray 2 A4K, 81/2" × 11"K 2000 sheets *3 (80 g/m2) (20 lb.
AdonisC4-AE_copy_F_FM_forPaper.book Page 110 Thursday, May 12, 2005 4:17 PM Specifications ❖ Staple • The following type of paper cannot be stapled: • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Thick paper • Curled paper • Paper of low stiffness • Paper of mixed sizes • In the following cases, copies will be delivered to the shift tray without stapling: • When the number of sheets for one set is over stapler capacity. • When memory reaches 0% during copying.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 112 Thursday, May 12, 2005 4:17 PM Specifications • The tray capacity for the stapled sheets is as follows: (paper weight: 80 g/m2, 20 lb.
AdonisC4-AE_copy_F_FM_forPaper.book Page 113 Thursday, May 12, 2005 4:17 PM Supplementary Informations • When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or Auto Reduce/Enlarge function, “Blank part will appear. Check orientation.”message may appear depending on the orientation of originals and paper you placed. In this case, change the paper orientation.
AdonisC4-AE_copy_F_FM_forPaper.book Page 114 Thursday, May 12, 2005 4:17 PM Specifications ❖ Duplex • You cannot use the following copy paper with this function: • Paper smaller than A5K, 51/2" × 81/2"K (possible on A5L, 51/2" × 81/2"L) • Paper thicker than 105 g/m2, 28 lb. • Paper thinner than 64 g/m2, 17 lb. • Translucent paper • OHP transparencies • Label paper (adhesive labels) • Postcards • When an odd number of originals is placed in the ADF, the back of the last page of copied paper is blank.
AdonisC4-AE_copy_F_FM_forPaper.book Page 115 Thursday, May 12, 2005 4:17 PM Supplementary Informations ❖ Booklet/Magazine • The machine sets the reproduction ratio automatically to meet the paper size and copies the originals together onto the paper. • The reproduction ratios you can specify are 25–400%. • If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available range. However, with some ratios, parts of the image might not be copied.
AdonisC4-AE_copy_F_FM_forPaper.book Page 116 Thursday, May 12, 2005 4:17 PM Specifications ❖ Margin Adjustment • If you set a binding margin that is too wide, part of the image may not be copied. • When making copies in Combine mode, the binding margin is added to the copies after the combination is finished. ❖ Background Numbering The numbers appear to overlap the copied image in some cases. ❖ Preset Stamp • You can change the size and density of the stamp with User Tools.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.book Page 118 Thursday, May 12, 2005 4:17 PM Specifications ❖ Front Cover, Front/Back Cover • If Blank mode is selected, the cover will not be counted as a copy. • Front and back covers are two-sided copied depending on the settings made in Display Time in Cover Sheet Tray of User Tools (System Settings). • If Display Time is selected to the At Mode Selected, settings made in Cover Sheet Tray has the priority.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
AdonisC4-AE_copy_F_FM_forPaper.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=132 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 5.280000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=132 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 5.