User's Manual

3
Shooting
51
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select Q and press B.
3 Select Q, R, or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4 Press the shutter release button halfway.
5 Point the remote control unit towards the remote
control receiver on the front or back of the camera,
and press the shutter release button on the remote
control unit.
t Memo
• The maximum operating distance of the remote control unit
is approx. 4 m from the front of the camera and approx. 2 m
from the back of the camera.
• To adjust focus with remote control, set in [19. AF with
Remote Control] of the E3 menu.
• When using the Remote Control Waterproof O-RC1,
the autofocus system can be operated with the q button.
The r button cannot be used.
1 Press A in standby mode.
The Drive Mode screen appears.
2 Select T and press B.
3 Select T, 1, or U and press B.
4 Use Q to select the number of shots.
Select from 2 images (Standard/+), 2 images (Standard/-),
3 images or 5 images.
5 Set the bracket value.
Available operations
6 Press E.
The camera returns to standby mode.
t Memo
• You can set the bracketing order in [8. Bracketing Order]
of the E2 menu.
• The bracket value can be set in increments of 1/3 EV steps
or 1/2 EV steps according to the [1. EV Steps] setting made
in the E1 menu.
• Set [9. One-Push Bracketing] to [On] in the E2 menu to shoot
the specified number of images with one press of the shutter
release button.
Remote Control
Remo te Co ntrol
Remote Control
Canc el
Cancel
OK
OK
Exposure Bracketing
R
Changes the bracket value (up to ±2 EV).
J→R Adjusts the exposure compensation value.
M
Resets the adjustment value to the default
setting.
Expo sure Brack eting
Exposure Bracketing
Canc el
Cancel
3 im ages
3 images
OK
OK
±0.3 EV
±0.3EV
e_kb502_om.book Page 51 Monday, October 14, 2013 4:14 PM