Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=60 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 0 mm Operating Instructions General Settings Guide Type for MP 161L/Aficio MP 161L/IS 2416L Printed in China AE AE B280-7608A Operating Instructions General Settings Guide 1 Getting Started 2 Combined Function Operations 3 User Tools ( System Settings ) 4 Troubleshooting 5 Other Functions 6 Specifications Read this manual
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=60 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 0 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
StellaC3L_GSG_F-AE_FM_forPaper.book Page i Monday, September 11, 2006 4:00 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file. ❖ General Settings Guide (this manual) Provides an overview of the machine and describes System Settings (paper trays, Key Operator Tools, etc.
StellaC3L_GSG_F-AE_FM_forPaper.book Page ii Monday, September 11, 2006 4:00 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i Copyrights and Trademarks ................................................................................. 1 Trademarks ................................................................................................................1 Information about Installed Software.............................
StellaC3L_GSG_F-AE_FM_forPaper.book Page iii Monday, September 11, 2006 4:00 PM 5. Other Functions Other Functions ................................................................................................... 43 Displaying the Total Counter....................................................................................43 Changing the Language...........................................................................................43 6. Specifications Main Unit...................................
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 1 Monday, September 11, 2006 4:00 PM Copyrights and Trademarks Trademarks Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Acrobat® is a registered trademark of Adobe Systems Incorporated. Bluetooth™ is a trademark of the Bluetooth SIG, Inc. (Special Interest Group) and is used by RICOH Company Limited under license. Copyright ©2001 Bluetooth SIG, Inc.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 2 Monday, September 11, 2006 4:00 PM • Information relating to the expat is available at: http://expat.sourceforge.net/ Copyright (c) 1998, 1999, 2000 Thai Open Source Software Centre, Ltd. and Clark Cooper.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 3 Monday, September 11, 2006 4:00 PM NetBSD 1. Copyright Notice of NetBSD For all users to use this product: This product contains NetBSD operating system: For the most part, the software constituting the NetBSD operating system is not in the public domain; its authors retain their copyright. The following text shows the copyright notice used for many of the NetBSD source code.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 4 Monday, September 11, 2006 4:00 PM 2. Authors Name List All product names mentioned herein are trademarks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: • This product includes software developed by the University of California, Berkeley and its contributors. • This product includes software developed by Jonathan R. Stone for the NetBSD Project.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 5 Monday, September 11, 2006 4:00 PM Sablotron Sablotron (Version 0.82) Copyright (c) 2000 Ginger Alliance Ltd. All Rights Reserve a) The application software installed on this product includes the Sablotron software Version 0.82 (hereinafter, “Sablotron 0.82”), with modifications made by the product manufacturer. The original code of the Sablotron 0.82 is provided by Ginger Alliance Ltd., the initial developer, and the modified code of the Sablotron 0.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 6 Monday, September 11, 2006 4:00 PM SASL CMU libsasl Tim Martin Rob Earhart Rob Siemborski Copyright (c) 2001 Carnegie Mellon University. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: A Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 7 Monday, September 11, 2006 4:00 PM MD4 Copyright (C) 1990-2, RSA Data Security, Inc. All rights reserved. License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA Data Security, Inc.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 8 Monday, September 11, 2006 4:00 PM How to Read This Manual Symbols The following set of symbols is used in this manual. R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 9 Monday, September 11, 2006 4:00 PM ENERGY STAR Program ENERGY STAR® Program The ENERGY STAR® Program encourages energy conservation by promoting energy efficient computers and other office equipment. The program backs the development and dissemination of products that feature energy saving functions. It is an open program in which manufacturers participate voluntarily.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 10 Monday, September 11, 2006 4:00 PM • Duplex Priority To conserve paper, the Duplex function (1-Sided → 2-Sided) can be selected preferentially when you turn on the operation switch or the main power switch, press the {Clear Modes} key, or the machine resets itself automatically. To change Duplex Mode Priority, see Copy Reference.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 11 Monday, September 11, 2006 4:00 PM 1. Getting Started Guide to Components ARK043S 1. Exposure glass cover (optional) or ARDF (optional). 4. Ventilation holes Place originals here face down. Prevents overheating. Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If the machine overheats, a fault might occur. 3. Internal tray 5. Main power switch See p.13 “External Options” 2.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 12 Monday, September 11, 2006 4:00 PM Getting Started 1 6. Main power indicator 9. Front cover Lights when the main power switch is turned on, and goes off when the switch is turned off. Open to access the inside of the machine. 7. Operation switch (On indicator) Press to turn the power on (the On indicator lights). To turn the power off, press again (the On indicator goes off). 8. Control panel See p.14 “Control Panel”. 10.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 13 Monday, September 11, 2006 4:00 PM Options Options External Options 1 1 2 3 ARK025S 1. Exposure glass cover 3. Paper tray unit (Tray 2) Lower this cover over originals. Holds 500 sheets. 2. ARDF Place stacks of originals here. They will feed in automatically. This document feeder can be used for two-sided originals.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 14 Monday, September 11, 2006 4:00 PM Getting Started Control Panel This illustration shows the control panel of the machine with options fully installed. 1 1 23 4 5 13 14 6 15 16 17 18 8 19 9 10 11 12 20 21 ARK032S 1. {Copy} key 8. {User Tools/Counter} key Press to activate the copy function. • User Tools Press to change default or operation parameters according to requirement. See p.21 “Accessing User Tools ( System Settings )”.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 15 Monday, September 11, 2006 4:00 PM Control Panel 13. {On Line} key Reference Printer/Scanner Reference 14. Copier function keys Reference Copy Reference 15. {Lighter} and {Darker} keys Press to change the image density setting. Select the image density in five increments, Lighter to Darker. 16. {Escape} key Press to cancel an operation or return to the previous display. 17.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 16 Monday, September 11, 2006 4:00 PM Getting Started Reading the Display and Using Keys This section explains how to read the display and use the Selection keys. 1 1 2 3 4 ARK0040S 1. Selection keys 2. {Escape} key Correspond to items at the bottom line on the display. Example: The Copy display Press to cancel an operation or return to the previous display. • When the instruction “press [Reduce] ” appears in this manual, press the left selection key.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 17 Monday, September 11, 2006 4:00 PM 2. Combined Function Operations Changing Modes Note ❒ You cannot switch modes in any of the following situations: • During immediate transmission • When accessing User Tools • While scanning an original ❒ The copying screen is displayed as default when the power is turned on. You can change this default setting. See p.23 “Function Priority”.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 18 Monday, September 11, 2006 4:00 PM Combined Function Operations Multi-Access You can carry out another job using a different function while the current job is being performed. Performing multiple functions simultaneously like this is called “Multi-accessing”. This allows you to handle jobs efficiently, regardless of how the machine is being used. For example: • You can make copies while receiving printer data.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 19 Monday, September 11, 2006 4:00 PM 3. User Tools ( System Settings ) User Tools Menu ( System Settings ) Reference For details about parallel interface, see Printer/Scanner Reference. ❖ General Features (See p.23 “General Features”.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 20 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) ❖ Key Operator Tools (See p.26 “Key Operator Code”.) Default (MFP) Default (Copier only) User Code Man.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 21 Monday, September 11, 2006 4:00 PM Accessing User Tools ( System Settings ) Accessing User Tools ( System Settings ) This section is for key operators in charge of this machine. User Tools allow you to change or set defaults. Note ❒ Operations for system settings differ from normal operations. Always quit User Tools when you have finished. See p.22 “Quitting User Tools”.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 22 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) Quitting User Tools A Press the {User Tools/Counter} key.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 23 Monday, September 11, 2006 4:00 PM Settings You Can Change with User Tools Settings You Can Change with User Tools Reference To access User Tools, see p.21 “Accessing User Tools ( System Settings )”. General Features ❖ Panel Key Sound The beeper (key tone) sounds when a key is pressed. 3 Note ❒ Default: On ❖ Copy Count Display The copy counter can be set to show the number of copies made (count up), or the number of copies yet to be made (count down).
StellaC3L_GSG_F-AE_FM_forPaper.book Page 24 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) ❖ Measurement Unit You can switch the measurement between “mm” and “inch”. Note ❒ Default: • Metric version: mm • Inch version: inch Tray Paper Settings 3 ❖ Paper Size: Tray 1–2 Select the size of the paper loaded in the paper tray.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 25 Monday, September 11, 2006 4:00 PM Settings You Can Change with User Tools ❖ Ppr Tray Priority:Copier (copier) You can specify the tray to supply paper for output. Note ❒ Default: Tray 1 ❖ Ppr Tray Priority:Printer (printer) You can specify the tray to supply paper for output. Note ❒ Default: Tray 1 3 Timer Settings ❖ Auto Off Timer After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 26 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) ❖ System Auto Reset Timer The System Reset setting automatically switches the screen to that of the function set in Function Priority when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. See p.23 “Function Priority”. Note ❒ Default: On, 60 sec.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 27 Monday, September 11, 2006 4:00 PM Settings You Can Change with User Tools ❖ Key Operator Code Specify whether or not to use passwords (max. eight digits) to control Key Operator Tools settings for key operator code. Note ❒ Default: Off ❒ If you select [On], enter the key operator code (max. eight digits) using the number keys, and then select [On:Partial] or [On:All] to set the access limit.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 28 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) C Select [Key Operator Tools] using {U} or {T}, and then press the {OK} key. D Select [Display/Print Counter] using {U} or {T}, and then press the {OK} key. E Press [Print]. F Press the {Start} key. G Press the {User Tools/Counter} key.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 29 Monday, September 11, 2006 4:00 PM Settings You Can Change with User Tools ❖ Counter per User Code Allows you to view and print the numbers of prints accessed with user codes, and to set those values to 0. Note ❒ Press {U} and {T} to show all the numbers of prints. ❒ The number of prints may differ from the counter value shown in Display/Print Counter. • Print counter per user code Prints the number of prints made under each user code.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 30 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) User Code Register user codes to restrict copier functions to certain users, and check on their use of copier functions: D Select [Program/Change User Code] using {U} or {T}, and then press the {OK} key. Registering a New User Code A Press the {User Tools/Counter} key. 3 E Select [Program] using {U} or {T}, and then press the {OK} key.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 31 Monday, September 11, 2006 4:00 PM User Code Changing a User Code Note ❒ Even if you change a user code, the counter value will not be cleared. A Press the {User Tools/Counter} key. B Select [System Settings] using {U} or {T}, and then press the {OK} key. G Enter the new user code using the number keys, and then press the {OK} or {#} key. The “ Programmed ” message appears, and then the “ User Code ” display returns.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 32 Monday, September 11, 2006 4:00 PM User Tools ( System Settings ) F Select [Per User Code] or [All User Codes] using {U} or {T}, and then press the {OK} key. Displaying the Counter for Each User Code You can check the counter for each user code. When selecting [All User Codes], a confirmation message appears. Press [Yes], and then proceed to step I.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 33 Monday, September 11, 2006 4:00 PM User Code Printing the Counter for Each User Code Clearing the Counter You can print out the counter for each user code. A Press the {User Tools/Counter} key. B Select [System Settings] using {U} A Press the {User Tools/Counter} key.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 35 Monday, September 11, 2006 4:00 PM 4. Troubleshooting If Your Machine Does Not Operate As You Want The following chart gives explanations of common problems and messages. If other messages appear, follow the instructions displayed. Note ❒ For further “Troubleshooting”, refer to the other manuals for this machine. See p.i “Manuals for This Machine”. Problem Causes Solutions “ Please wait. ” appears. This message appears Wait for the machine to get ready.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 36 Monday, September 11, 2006 4:00 PM Troubleshooting Problem Causes Solutions Misfeeds occur frequently. Copy paper size setting is not correct. Set the proper paper size. See p.24 “Paper Size: Tray 1–2” and p.50 “Copy Paper”. The tray's back fence may not be set properly. Check the back fence is set properly. See p.39 “Changing the Paper Size”. An error message remains, even if misfed paper is removed.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 37 Monday, September 11, 2006 4:00 PM x Clearing Misfeeds x Clearing Misfeeds 4 ARK028S R CAUTION: • The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper. Important ❒ When clearing misfeeds, do not turn off the power switch. If you do, your copy settings are cleared. ❒ To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 39 Monday, September 11, 2006 4:00 PM Changing the Paper Size Changing the Paper Size Preparation Be sure to select the paper size with User Tools and the paper size selector. If you do not, misfeeds might occur. See p.24 “Paper Size: Tray 1–2”. When using A4L size paper A Place the back fence in the corner pocket on the left. Reference For details about paper sizes and types, see p.50 “Copy Paper”.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 40 Monday, September 11, 2006 4:00 PM Troubleshooting F Square the paper and load it in the tray. H While pressing the release lever, set the back fence to the new size. ARK015S 4 Important ❒ Be sure to set the paper under the roller. ❒ Do not stack paper over the limit mark. G While pressing the release lever, adjust the side fences to the new paper size. ARK017S I Push the paper tray in until it stops.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 41 Monday, September 11, 2006 4:00 PM Changing the Paper Size When loading 81/4" × 14"L or 81/2" × 14"L size paper A Pull the back fence off from the tray. B Place it in the corner pocket on the left. Important ❒ Do not stack paper over the limit mark. ❒ Load paper so that the paper touches the right side of the tray, or misfeeds might occur. F While pinching the release lever, adjust the side and back fences to the new paper size.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 42 Monday, September 11, 2006 4:00 PM Troubleshooting Selecting the Paper Size with User Tools E Select the paper size using the scroll keys, and then press the {OK} key. A Press the {User Tools/Counter} key. The “ Programmed ” message appears. F Press the {User Tools/Counter} key. 4 ARK033S B Select [System Settings] using {U} or {T}, and then press the {OK} key. C Select [Tray Paper Settings] using {U} or {T}, and then press the {OK} key.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 43 Monday, September 11, 2006 4:00 PM 5. Other Functions Other Functions Displaying the Total Counter E Press the {User Tools/Counter} key. You can display the total counter value used for all functions. Changing the Language A Press the {User Tools/Counter} key. You can change the language used on the display. English is set as default. A Press the {User Tools/Counter} key. ARK033S B Select [Counter] using {U} or {T}, and then press the {OK} key.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 45 Monday, September 11, 2006 4:00 PM 6.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 46 Monday, September 11, 2006 4:00 PM Specifications ❖ Copy paper size: • Trays: A4L, B5 JISL, A5K, 81/2" × 11"L, 51/2" × 81/2"K, 16KL • Bypass: A4L, A5KL, B5 JISL, 81/2" × 14"L, 81/2" × 11"L, 51/2" × 81/2"KL, 71/4" × 101/2"L, 8" × 13"L, 81/2" × 13"L, 81/4" × 13"L, 81/4" × 14"L, 16KL, 41/8" × 91/2"L, 37/8" × 71/2"L, C5 EnvL, C6 EnvL, DL EnvL • Bypass (custom size): Vertical: 90 – 216 mm, 3.5" – 8.5" Horizontal: 140 – 600 mm, 5.6" – 23.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 47 Monday, September 11, 2006 4:00 PM Main Unit ❖ Copy paper capacity: • Tray 1: 250 sheets (80 g/m2, 20 lb) • Bypass: 100 sheets (80 g/m2, 20 lb) ❖ Power consumption: Main unit only Complete system *1 Warm up Less than 900 W Less than 900 W Stand-by About 70 W About 75 W During printing About 360 W About 360 W Maximum Less than 900 W Less than 900 W *1 Main unit with the optional ARDF, printer/scanner unit, and paper tray unit.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 48 Monday, September 11, 2006 4:00 PM Specifications Options Exposure Glass Cover Lower this over originals.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 49 Monday, September 11, 2006 4:00 PM Options Paper Tray Unit (Tray 2) ❖ Paper weight: 60 – 90 g/m2 (16 – 24 lb.) ❖ Paper size: A4L, 81/2" × 14"L, 81/2" × 13"L, 81/2" × 11"L, 81/4" × 13"L, 81/4" × 14"L ❖ Maximum power consumption: 15 W (power is supplied from the main frame) ❖ Paper capacity: 500 sheets (80 g/m2, 20 lb) ❖ Dimensions (W × D × H): 430 × 414 × 140 mm, 17.0 × 16.3 × 5.6 inch ❖ Weight: 6 kg (13.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 50 Monday, September 11, 2006 4:00 PM Specifications Copy Paper Recommended Paper Sizes and Types The following limitations apply to each tray: Metric version Paper tray 1 Inch version A4L, B5 JISL, A5K, 8 /2" × 11"L, 51/2" × 81/2"K, 16KL 1 Paper weight 2 Paper capacity 60 – 90 g/m , 16 – 24 lb 250 sheets *1 60 – 90 g/m2, 16 – 24 lb 500 sheets *1 72 – 90 g/m2, 19 – 24 lb 100 sheets *1 Note ❒ You can specify the paper size with the User Tools. See p.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 51 Monday, September 11, 2006 4:00 PM Copy Paper Important ❒ If you use damp or curled paper, a misfeed might occur. In such a case, try turning over the paper stack in the paper tray. If there is no improvement, change to copy paper with less curl. Note ❒ When using the bypass tray, we recommend you set the copy paper direction to L. ❒ When printing on envelopes, note the following: • Load the envelope with the copy side face down on the bypass tray.
StellaC3L_GSG_F-AE_FM_forPaper.book Page 52 Monday, September 11, 2006 4:00 PM Specifications Unusable Paper R CAUTION: • Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or machine failure. Important ❒ Do not use any of the following kinds of paper or a fault might occur: • Art paper • Aluminum foil • Carbon paper • Conductive paper ❒ Do not use copy paper that has been already copied on. Otherwise, a paper misfeed might occur.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.
StellaC3L_GSG_F-AE_FM_forPaper.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=60 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 0 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
Paper type: OK Prince Eco G100(55kg), Paper Thickness=80 µm // Pages in book=60 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 0 mm Operating Instructions General Settings Guide Type for MP 161L/Aficio MP 161L/IS 2416L Printed in China AE AE B280-7608A Operating Instructions General Settings Guide 1 Getting Started 2 Combined Function Operations 3 User Tools ( System Settings ) 4 Troubleshooting 5 Other Functions 6 Specifications Read this manual