Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=188 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.400000 mm RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-3-3479-3111 The Netherlands RICOH EUROPE B.V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=188 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.400000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
JupiterC2_GSG_GB_F2_Pre_FM.book Page i Thursday, June 2, 2005 1:57 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader/Adobe Reader is necessary to view the manuals as a PDF file.
JupiterC2_GSG_GB_F2_Pre_FM.book Page ii Thursday, June 2, 2005 1:57 PM ❖ Scanner Reference (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's scanner function. ❖ Manuals for DeskTopBinder Lite DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner Driver and Document Management Utility”. • DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder Lite in detail.
JupiterC2_GSG_GB_F2_Pre_FM.book Page iii Thursday, June 2, 2005 1:57 PM What You Can Do with This Machine The following introduces the functions of this machine, and the relevant manuals containing detailed information about them. Products marked with * are optional. For details about optional products, see p.164 “Options”, or contact your local dealer.
JupiterC2_GSG_GB_F2_Pre_FM.book Page iv Thursday, June 2, 2005 1:57 PM Paperless Fax Transmission and Reception Fax Transmission and Reception Through the Internet Reception ADL008S ADL003S • You can store received fax messages on the machine's hard disk, instead of printing them onto paper. You can use DeskTopBinder Professional*/Lite or a Web browser to check, print, delete, retrieve, or download documents using your computer (Storing received documents). See Facsimile Reference .
JupiterC2_GSG_GB_F2_Pre_FM.book Page v Thursday, June 2, 2005 1:57 PM Using the Scanner in a Network Environment Administrating the Machine/Protecting Documents (Security Functions) ADL005S • You can send scanned documents to other network computers using e-mail (Sending stored scan file by e-mail). See Scanner Reference. • With ScanRouter delivery software, you can save scanned documents in specified destinations on network computers (File storage). See Scanner Reference.
JupiterC2_GSG_GB_F2_Pre_FM.book Page vi Thursday, June 2, 2005 1:57 PM Monitoring the Machine Via Computer ADL007S You can monitor machine status and change settings using a computer. • Using SmartDeviceMonitor for Admin, SmartDeviceMonitor for Client, or a Web browser, you can use a computer to view the machine's status, such as to check on paper quantities, or misfeeds, etc. See Network Guide. • You can also use a Web browser to make network settings. See Network Guide.
JupiterC2_GSG_GB_F2_Pre_FM.book Page vii Thursday, June 2, 2005 1:57 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine.................................................................. iii Copier, Facsimile, Printer, and Scanner Functions ................................................... iii Utilizing Stored Documents ......................................................................
JupiterC2_GSG_GB_F2_Pre_FM.book Page viii Thursday, June 2, 2005 1:57 PM Printing Stored Documents ...................................................................................... 42 Deleting Stored Documents ..................................................................................... 45 Viewing Stored Documents Using a Web Browser .................................................. 45 Downloading Stored Documents..............................................................................
JupiterC2_GSG_GB_F2_Pre_FM.book Page ix Thursday, June 2, 2005 1:57 PM Registering a Protection Code ........................................................................... 99 Registering a Protection Code To a Single User ..................................................... 99 Registering a Protection Code To a Group User ...................................................100 Registering the Transfer Request ....................................................................
JupiterC2_GSG_GB_F2_Pre_FM.book Page x Thursday, June 2, 2005 1:57 PM Where to Put Your Machine .............................................................................. 146 Machine Environment ............................................................................................146 Moving....................................................................................................................146 Power Connection..........................................................................
JupiterC2_GSG_GB_F2_Pre_FM.book Page 1 Thursday, June 2, 2005 1:57 PM Notice Notice To Wireless LAN Interface (optional) Users Notice to Users in EEA Countries This product complies with the essential requirements and provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. The CE Declaration of Conformity is available on the Internet at URL: http://www.ricoh.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 2 Thursday, June 2, 2005 1:57 PM Copyrights and Trademarks Trademarks Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Acrobat® is a registered trademark of Adobe Systems Incorporated. Bluetooth™ is a trademark of the Bluetooth SIG, Inc. (Special Interest Group) and is used by RICOH Company Limited under license. Copyright ©2001 Bluetooth SIG, Inc.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 3 Thursday, June 2, 2005 1:57 PM Information about Installed Software expat • The software including controller, etc. (hereinafter "software") installed on this product uses the expat Version under the conditions mentioned below. • The product manufacturer provides warranty and support to the software of the product including the expat, and the product manufacturer makes the initial developer and copyright holder of the expat, free from these obligations.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 4 Thursday, June 2, 2005 1:57 PM 4 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: A Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 5 Thursday, June 2, 2005 1:57 PM • This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project. • This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. • This product includes software developed by Christos Zoulas. • This product includes software developed by Christopher G. Demetriou for the NetBSD Project.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 6 Thursday, June 2, 2005 1:57 PM e) The source code of the Sablotron software is available at: http://www.gingerall.com f) MPL 1.1 is available at: http://www.mozilla.org/MPL/MPL-1.1.html JPEG LIBRARY • The software installed on this product is based in part on the work of the Independent JPEG Group. SASL CMU libsasl Tim Martin Rob Earhart Rob Siemborski Copyright © 2001 Carnegie Mellon University. All rights reserved.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 7 Thursday, June 2, 2005 1:57 PM MD4 Copyright © 1990-2, RSA Data Security, Inc. All rights reserved. License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or referencing this software or this function. License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 8 Thursday, June 2, 2005 1:57 PM Samba(Ver 2.2.2-ja-1.1) For SMB transmission, this machine uses Samba ver 2.2.2-ja-1.1 (hereinafter referred to as Samba 2.2.2-ja-1.1). Copyright © Andrew Tridgell 1994-1998 This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 9 Thursday, June 2, 2005 1:57 PM How to Read This Manual Symbols This manual uses the following symbols: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury if you misuse the machine by not following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section in the General Settings Guide.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 10 Thursday, June 2, 2005 1:57 PM Safety Information When using this machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 11 Thursday, June 2, 2005 1:57 PM R CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur. • Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur. • If you use the machine in a confined space, make sure there is a continuous air turnover.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 12 Thursday, June 2, 2005 1:57 PM Positions of Labels and Hallmarks for RWARNING and RCAUTION This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 13 Thursday, June 2, 2005 1:57 PM ENERGY STAR Program As an ENERGY STAR Partner, we have determined that this machine model meets the ENERGY STAR Guidelines for energy efficiency. The ENERGY STAR Guidelines intend to establish an international energy-saving system for developing and introducing energy-efficient office equipment to deal with environmental issues, such as global warming.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 14 Thursday, June 2, 2005 1:57 PM Reference To change the settings of the Duplex Priority mode, see “Duplex Mode Priority”in “General Features P.2/5”, Copy Reference.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 15 Thursday, June 2, 2005 1:57 PM Machine Types This machine comes in three models which vary in copy speed. To confirm which model you have, see the inside front cover.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 17 Thursday, June 2, 2005 1:57 PM 1. Getting Started Guide to Components AFZ001S 1. Exposure glass cover (optional) or Auto Document Feeder (ADF) (optional) 5. Earth Leakage Breaker Lower the exposure glass cover over originals placed on the exposure glass. If you have the ADF, load a stack of originals here. They will be fed automatically, one by one. (The illustration shows the ADF.) 6. Ventilation holes 2. Exposure glass Place originals face down. 3.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 18 Thursday, June 2, 2005 1:57 PM Getting Started 9. Control panel 12. Paper tray See p.21 “Control Panel”. Load paper here. See p.111 “BLoading Paper”. 10. Standard tray Copied, printed paper or fax messages are delivered here. 1 11. Front cover 13. Paper tray unit (optional) Load paper here. See p.111 “BLoading Paper”, p.19 “External Options”. Open to access the inside of the machine. AFZ024S 1. Upper right cover 4.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 19 Thursday, June 2, 2005 1:57 PM Guide to Components External Options 1 AFZ006S 1. Left tray 5. 2 Tray finisher If you select this as the output tray, copies will be delivered face down. Sorts, stacks, staples, and punches copies. *1 Finisher Shift Tray 1 *2 Finisher Shift Tray 2 2. Exposure glass cover Lower this cover over originals before copying. 6. Booklet finisher Load a stack of originals here. They will be fed in automatically.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 20 Thursday, June 2, 2005 1:57 PM Getting Started Internal Options A 1 B C D E F G *1 20 Fax unit Allows you to use the facsimile function. IEEE 1394 interface board *1 Connects to an IEEE 1394 cable. Bluetooth *1 Allows you to expand the interface. File Format Converter Allows you to download documents from the Document Server stored by copier and printer functions. See p.46 “Downloading Stored Documents”. IEEE 802.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 21 Thursday, June 2, 2005 1:57 PM Control Panel Control Panel This illustration shows the control panel of a machine with options fully installed. 1 AFZ025S 1. Screen contrast knob Adjusts display panel brightness. 2. {User Tools/Counter}} key • User Tools Press to change defaults and conditions to meet your requirements. See p.52 “Accessing User Tools (System Settings)”. • Counter Press to check or print the counter value. See p.156 “Counter”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 22 Thursday, June 2, 2005 1:57 PM Getting Started 1 8. { Program}} key (copier/facsimile/scanner mode) 17. {#}} key Press to register frequently used settings, or recall registered settings. 18. Number keys 9. {Clear Modes}} key Press to clear previous copy job settings. 10. {Energy Saver}} key Press to switch into and out of Energy Saver mode. See p.28 “Energy Saver Mode”. 11.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 23 Thursday, June 2, 2005 1:57 PM Control Panel Display Panel The display panel shows machine status, error messages, and function menus. The function items displayed serve as selector keys You can select or specify an item by lightly pressing them. When you select or specify an item on the display panel, it is highlighted thus . Keys appearing as cannot be used. 1 Important ❒ A force or impact of more than 30 N (about 3 kgf) will damage the display panel.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 24 Thursday, June 2, 2005 1:57 PM Getting Started When the Authentication Screen is displayed When Basic Authentication, Windows Authentication, or LDAP Authentication is set, the authentication screen is displayed. Unless a valid user name and password are entered, operations are not possible with the machine. 1 Note ❒ Consult the User Administrator about your login user name and login password.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 25 Thursday, June 2, 2005 1:57 PM Control Panel Log Off Important ❒ To prevent unauthorized users from using the machine, always log off when you have finished using the machine. 1 A Press {User Tools / Counter}}. ZFLS110E B Press [Logout]. C Press [Yes]. D Press {User Tools / Counter}}.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 26 Thursday, June 2, 2005 1:57 PM Getting Started Turning On the Power This machine has two power switches. 1 The main power indicator turns on. ❖ Operation switch (right side of the control panel) Press to activate the machine. When the machine has finished warming up, you can make copies. ❖ Main power switch (left side of the machine) Turning off this switch will turn off the main power indicator on the right side of the control panel.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 27 Thursday, June 2, 2005 1:57 PM Turning On the Power Turning Off the Power A Make sure the On indicator is not A Make sure the exposure glass cov- B Open the switch cover, and then lit. er or the ADF is in the right position. B Press the operation switch. 1 turn off the main power switch. The main power indicator turns off. The On indicator turns off.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 28 Thursday, June 2, 2005 1:57 PM Getting Started Saving Energy 1 - Energy Saver Mode If you do not use the machine for a certain period after an operation, or when you press the { Energy Saver} } key, the display disappears and the machine goes into Energy Saver mode. When you press the {Energy Saver} } key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 29 Thursday, June 2, 2005 1:57 PM 2.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 30 Thursday, June 2, 2005 1:57 PM Combined Function Operations ❒ The copying screen is displayed as default after power on. You can change this default setting. See p.53 “Function Priority”. 2 AFZ020S - System Reset The machine returns automatically to its initial condition when the job is finished, after a certain period of time has elapsed. This function is called “System Reset”. See p.53 “Function Priority”. Note ❒ You can change the System Reset time. See p.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 31 Thursday, June 2, 2005 1:57 PM Multi-Access Multi-Access You can carry out another job using a different function while the current job is being performed. Performing multiple functions simultaneously in this manner is called “Multi-accessing”. This allows you to handle jobs efficiently, regardless of how the machine is being used. For example: • While making copies, you can scan documents to store in the Document Server.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 35 Thursday, June 2, 2005 1:57 PM 3. Document Server Relationship between Document Server and Other Functions The following table describes the relationship between the Document Server and other functions.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 36 Thursday, June 2, 2005 1:57 PM Document Server Document Server Display ❖ Document Server Main Display 3 AFZ021S 1. Operating status and messages. 2. The title of the currently selected 4. The operation keys 5. The functions under which the screen. documents were stored. 3. The numbers of originals, copies, and printed pages. The icons below show the functions active when the documents were stored in the Document Server.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 37 Thursday, June 2, 2005 1:57 PM Using the Document Server Using the Document Server Storing Data ❖ File name Stored documents are automatically named “COPY0001”, “COPY0002”. You can change assigned file names. ❖ User name You can register a user name to identify the user or user group that stored the documents. To assign it, you can register the user name using the name assigned to the user code, or by entering the name directly.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 38 Thursday, June 2, 2005 1:57 PM Document Server A Press the {Document Server}} key. E Make any required settings. Reference For details, see Copy Reference. 3 ZGJS776E B Press [Scan Original]. C Enter a user name, file name, or password if necessary. Note ❒ If you do not enter a file name, one is automatically assigned. Reference p.38 “To register or change a user name” p.39 “To change a file name” p.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 39 Thursday, June 2, 2005 1:57 PM Using the Document Server When no user names are registered in the Address Book, the User (Destination) Name entry display appears. Reference p.73 “Authentication Information” When no user names are registered in the Address Book A Enter a new user name, and then press [OK]. When using a registered user name in the Address Book A Select a registered user name from the list, and then press [OK]. 3 Reference p.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 40 Thursday, June 2, 2005 1:57 PM Document Server To set or change a password C Press [File Management]. A Press [Scan Original]. The Scan Original display appears. B Press [Password]. D Press [Change User Name], [Change File Name], or [Change Password]. E Enter the new user name, file name, 3 C Enter a password using the number or password using the letter keys or number keys and then press [OK]. D Reenter the password (four dig- Reference p.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 41 Thursday, June 2, 2005 1:57 PM Using the Document Server ❒ You can sort document names in the list by user name, file name, or date. To sort documents, press [User Name], [File Name], or [Date]. ❒ If you cannot determine docum ent c on ten t from t he file name, you can print just the first page of the document for checking purposes. See p.44 “Printing the first page”. ❒ To cancel document selection, press it again.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 42 Thursday, June 2, 2005 1:57 PM Document Server To search by file name A Press the {Document Server}} key. B Press [Search by File Name]. 3 C Enter the file name using the letter keys, and then press [OK]. Only files beginning with the name entered appear in the Select Files to Print display. Reference p.157 “Entering Text”. Note ❒ To display all files stored in the Document Server, press [File List]. To search by user name A Press the {Document Server}} key.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 43 Thursday, June 2, 2005 1:57 PM Using the Document Server B If you need to change print settings, press [Print Settings]. The Print Settings display appears. User names, file names, and print order of documents appear. Note ❒ Print settings made for printing in copier or printer function remain after printing and applied to the next job. Print settings made in facsimile mode, however, do not remain.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 44 Thursday, June 2, 2005 1:57 PM Document Server Changing the number of copies during printing Limitation ❒ The number of copies can only be changed when the Sort function is selected in the print settings. A Press the {Clear/Stop}} key. B Press [Change Quantity]. C Enter a new number of copies us- 3 ing the number key. D Press the {#}} key. E Press [Continue]. Printing restarts.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 45 Thursday, June 2, 2005 1:57 PM Using the Document Server ❒ You can sort document names in the list by user name, file name, or date. To sort documents, press [User Name], [File Name], or [Date]. ❒ To cancel a document selection, press it again. B Press [Print 1st Page]. C Press the {Start}} key. Deleting Stored Documents Important ❒ You can store up to 2,000 documents in the Document Server. No more documents can be stored when the total is 2,000.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 46 Thursday, June 2, 2005 1:57 PM Document Server C Click [Document Server]. The Document Server File List appears. Note ❒ To switch the display format, click [Details], [Thumbnails] or [Icons] from the [Display method] list. D Click the properties button of the 3 document you want to check. Information about that document appears. E Check the document's content. Note ❒ To enlarge the document preview, click [Enlarge Image].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 47 Thursday, June 2, 2005 1:57 PM Settings for the Document Server Settings for the Document Server ❖ Copier/Document Server Features (See “General Features P.4/5”, Copy Reference.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 49 Thursday, June 2, 2005 1:57 PM 4. User Tools (System Settings) User Tools Menu (System Settings) Reference For details about Interface Settings and File Transfer, see “User Tools Menu (System Settings)”, Network Guide. For details about parallel interface, see “System Settings (Parallel Connection)”, Printer Reference. ❖ General Features (See p.53 “General Features”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 50 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❖ Tray Paper Settings (See p.56 “Tray Paper Settings”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 51 Thursday, June 2, 2005 1:57 PM User Tools Menu (System Settings) ❖ File Transfer • For details about network settings, see “User Tools Menu (System Settings)”, Network Guide. ❖ Administrator Tools (See p.61 “Administrator Tools”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 52 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Accessing User Tools (System Settings) This section is for administrators in charge of this machine. User Tools allow you to change or set defaults. Note ❒ Operations for system settings differ from normal operations. Always quit User Tools when you have finished. See p.52 “Exiting User Tools”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 53 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools Settings You Can Change with User Tools Reference To access User Tools, see p.52 “Accessing User Tools (System Settings)”. General Features ❖ Panel Tone The beeper (key tone) sounds when a key is pressed.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 54 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❒ When the left tray, 2 tray finisher, or booklet finisher is installed on the machine, you can specify an output tray for each document to be delivered. For details about how to specify an output tray for each function, see the following sections: • p.54 “Output: Copier (copier)” • p.55 “Output: Document Server (Document Server)” • p.55 “Output: Facsimile (facsimile)” • p.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 55 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❒ Paper will be delivered to the external tray when copying onto OHP transparencies, thick paper, thick paper (back side) or 12" × 18"paper from the bypass tray, even if you have specified not to use the external tray as the output tray. ❒ The left tray cannot be used as the output tray for duplex printing.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 56 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Output tray settings Limitation ❒ You cannot interrupt the current stapling job even if a stapling job is specified by a different function. ❒ When the 2 tray Finisher or booklet finisher is installed and stapling or shiftsorting is specified for a job, the job will be delivered to the finisher shift tray, finisher shift tray 1 or finisher shift tray 2 regardless of the output tray specified.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 57 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❖ The paper sizes you can set for trays are as follows: • Auto Detect, A3L, B4 JISL, A4K, A4L, A5K • 11"×17"L, 81/2"×14"L, 81/2"×11"K, 81/2"×11"L, 8"×13"L, 81/2"×13"L, 81/4"×13"L, 71/4"×101/2"L Important ❒ If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 58 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❒ When paper of the same type and size is loaded in two different paper trays and you want to specify tray for 2 Sided Copy and tray for 1 Sided Copy, specify the upper tray for 2 Sided Copy. If one of the trays is specified as the default in Paper Tray Priority, assign 2 Sided Copy to that tray. ❒ A mark appears next to the paper tray if [No] is selected in Auto Paper Select.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 59 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❖ Printer Bypass Paper Size You can specify the size of the paper in the bypass tray when printing data from the computer.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 60 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❖ System Auto Reset Timer The System Reset setting automatically switches the screen to that of the function set in Function Priority, when no operations are in progress, or when an interrupted job is cleared. This setting determines the system reset interval. See p.53 “Function Priority”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 61 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❖ Set Time Set the time for the copier's internal clock using the number keys. Note ❒ To change between hours, minutes and seconds, press [← ←] and [→ →]. ❒ Enter the time using the 24–hour format (in 1 second increments). ❖ Auto Logout Timer You can specify whether or not to automatically log out a user when the user does not operate the machine for a specified period of time after logging in.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 62 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❖ Extended Security You can specify whether or not to use the extended security functions. For details about the extended security functions, see Security Reference. ❖ Display/Print Counter Allows you to view and print the various counters. • Display/Print Counter Displays counters for each functions (Total, Copier, Facsimile, Printer, A3/DLT, Duplex, Staple).
JupiterC2_GSG_GB_F2_Pre_FM.book Page 63 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❖ Address Book Management You can add, change or delete information registered in the Address Book. For details, see p.68 “Address Book”. • [Program / Change] You can register and change names as well as user codes. • Names You can register a name, key display, registration number, and title selection. • Auth.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 64 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❖ Address Book: Program / Change / Delete Transfer Request You can register fax destinations for the Transfer Request function in facsimile mode. For details about operations, see p.101 “Registering the Transfer Request”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 65 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools The name selected in step E moves to the place selected in step F, and the keys for other names will be shifted accordingly. Note ❒ You can also select a name using the number keys ❖ Print Address Book: Destination List You can print the list of names registered in the Address Book. • Print in Title 1 Order Prints a list of the names according to the order in Title 1.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 66 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❖ Address Book: Select Title You can specify the title to select a name. Note ❒ Default: Title 1 ❖ Auto Delete File You can specify whether documents stored in the Document Server will or will not be deleted after a specified period of time. ❒ ❒ ❒ ❒ ❒ 4 Note Default: Yes After 3 day(s) If you select [Yes], documents stored subsequently will be deleted.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 67 Thursday, June 2, 2005 1:57 PM Settings You Can Change with User Tools ❖ Auto Erase Memory Setting When the optional DataOverwriteSecurity Unit is installed, you can specify if data is to be automatically deleted after a job is completed. Note ❒ Default: Off ❒ You can also specify the method of overwriting. Reference See the manual for DataOverwriteSecurity Unit.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 68 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Address Book Registering information such as the names of users and their e-mail addresses in the Address Book allows you to manage them easily. Important ❒ Address Book data is stored on the hard disk. It can be lost if there is some kind of hard disk failure. The manufacturer shall not be responsible for any damages resulting data loss.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 69 Thursday, June 2, 2005 1:57 PM Address Book • IP-Fax Destination ❖ Add to Group You can put registered e-mail and folder destinations into a group for easier management. ❖ E-mail You can register e-mail destinations in the Address Book. Managing names in the Address Book ❖ Folder You can register the protocol, path name and server name.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 70 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) 4 Sending e-mail by Quick Dial Managing users and machine usage By registering e-mail addresses in the Address Book, you can specify e-mail destinations simply by selecting them from the fax initial display when sending a document by internet fax. You can also specify an e-mail address by selecting the destination shown on the initial scanner display when sending a document using the scanner function.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 71 Thursday, June 2, 2005 1:57 PM Registering Names Registering Names The user name is useful for selecting a destination when sending faxes or email. You can also use it as a folder destination. H Press the key for the classification you want to use under Select Title. Registering a Name A Press the {User Tools/Counter}} key. ZFLS110E B Press [System Settings]. C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book Management].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 72 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) E Select the registered name you want to change. Press the name key, or enter the re g is t e re d n u m be r us in g t he number keys Note ❒ If you press , you can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination. To change the name or key display 4 A Press [Change] on the right of the name or key display.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 73 Thursday, June 2, 2005 1:57 PM Authentication Information Authentication Information Register user codes to limit users to the following functions and check their use of each function: • Copier • Document Server • Facsimile • Scanner • Printer Note ❒ The number of copies made of documents stored in the Document Server using the facsimile function is counted for each user code. This allows you to check each user's usage.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 74 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) H Press [TTNext] twice. I Select the functions to be used with the user code from Available Functions. ❒ To change the name, key display and title, see p.71 “Changing a Registered Name”. F Press [Auth. Info]. G Press [Change], and then enter the new user code using the number keys J Press [OK]. Note ❒ To continue registering user codes, repeat the procedure from step E. 4 K Press [Exit].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 75 Thursday, June 2, 2005 1:57 PM Authentication Information C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book Management]. E Select the name whose code is to be deleted. Press the name key, or enter the re g is t e re d n u m be r us in g t he number keys. F Press [Auth. Info]. G Press [Change] to delete the user code, and then press [#]. H Press [OK]. I Press [Exit]. J Press the {User Tools/Counter}} key.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 76 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) To print the number of prints for all user codes A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools]. D Press [Display / Clear / Print Counter per User]. E Press [Print Counter List] under All Users. 4 Note ❒ Enter the user code, and then press [#] if the user code is registered. E Select the user code to clear.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 77 Thursday, June 2, 2005 1:57 PM Fax Destination Fax Destination Register a fax destination so you do not need to enter fax numbers each time, and can send documents that have been scanned in using the facsimile function. • It is easy to select the fax destination if you register a “User (Destination) Name” and “Key Display” for the fax destination. • You can register the fax destinations by selecting them from redial function.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 78 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) ❒ You can program a standard message other than those registered in the machine. See “Programming, Changing, and Deleting Standard Messages”, Facsimile Reference . • International TX mode When setting the International TX mode to [On], the machine transmits more carefully by lowering transmission speed. However, it may take a longer time to send a fax.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 79 Thursday, June 2, 2005 1:57 PM Fax Destination To select the line To set the International TX Mode A Press [Select Line]. A Press [Change] under International TX Mode. B Select [Off] or [On], and then press [OK]. To select the fax header B Select the line, and then press [OK]. To program the SUB Code A Press [Adv. Features], and then select [SUB Code]. B Press [Change] under TX SUB Code. C Enter a SUB Code using the number keys, and then press [OK].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 80 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Reference p.157 “Entering Text” F Press [OK]. G Press [Change] under Line 3. H Select a standard message, and then press [OK]. I Press [OK]. F Press [Fax Dest.]. G Change the settings. To change the fax number A Press [Change] under Facsimile No.. H Press [OK]. Note ❒ When a group is registered, you can also set label insertion to the group. See p.94 “Registering Names to a Group”. 4 I Press [Exit].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 81 Thursday, June 2, 2005 1:57 PM Fax Destination To change the SEP Code A Press [Adv. Features]. B Press [SEP Code]. C Press [Change] under RX SEP Code. D Enter the new SEP Code, and then press [OK]. E To change the password, press [Change ] under P ass word (PWD). F Enter the new password, and then press [OK]. G Press [OK]. To change the fax header A Press [Change] under Fax Header. B Select the new fax header, and then press [OK].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 82 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) H Press [Delete All], and then press [OK]. I Press [OK]. J Press [Exit]. K Press the {User Tools/Counter}} key. 4 Note ❒ If you press , you can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination. ❒ To register the name, key display, and title, see p.71 “Registering a Name”. F Press [Fax Dest.] G Press [IP-Fax].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 83 Thursday, June 2, 2005 1:57 PM Fax Destination C Enter a SEP Code using the number keys, and then press [OK]. D To enter a password, press [Change] under Password (PWD). E Enter a password using the number keys, and then press [OK]. F Press [OK]. To change the SUB Code A Press [Adv. Features]. B Press [SUB Code]. C Press [Change] under TX SUB Code. D Enter the new SUB Code, and then press [OK]. To select the protocol E To A Select [H.323] or [SIP].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 84 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) E-mail Destination Register e-mail destinations so you do not need to enter an e-mail address every time, and can send scan files from scanner or fax function by email. • It is easy to select the e-mail destination if you register “Name” and “Key Display” as the e-mail destination. • You can register e-mail destinations as a group.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 85 Thursday, June 2, 2005 1:57 PM E-mail Destination G Press [Change] under E-mail Address. H Enter the e-mail address, and then press [OK]. Entering the e-mail address A Enter the e-mail address. B Press [OK]. Using the e-mail address as the sender When an e-mail address is entered, it can be used as the sender's address. A Press [Protection]. B Press [Sender] on the right side of Use Name as.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 86 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Deleting a Registered E-mail Destination To delete a name entirely, see p.72 “Deleting a Registered Name”. A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book Management]. E Select the name whose e-mail ad- 4 dress you want to delete.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 87 Thursday, June 2, 2005 1:57 PM Registering Folders Registering Folders By registering a shared folder, you can send scan files to it directly. There are two types of protocol you can use: • SMB For sending files to shared Windows folders • FTP Use when sending files to an FTP server. Note ❒ For details about protocols, server names, and folder levels, consult your network administrator. ❒ You can prevent unauthorized users from accessing folders from the machine.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 88 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) F Press [Auth. Info], and then press [T TNext]. G Press [Specify Other Auth. Info] on the right side of Folder Authentication. Note ❒ When [Do not Specify] is selected, the SMB User Name and SMB Password that you have specified in Default User Name / Password (Send) of File Transfer settings applies. For details, see "User Tools Menu (System Settings)", Network Guide.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 89 Thursday, June 2, 2005 1:57 PM Registering Folders Note ❒ If you have already specified your user name and password in steps F to L , the Browse Network display only lists client computers you are authorized to access. B Select a client computer. Shared folders under it appear. Note ❒ You can press [Up One Level] to switch between levels. C Select the folder you want to register. The Logon display appears.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 90 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) G Select the items you want to change. To change the protocol K Press [Exit]. L Press the {User Tools/Counter}} key. A Press [FTP]. Deleting a registered folder Note ❒ To delete a name entirely, see p.72 “Deleting a Registered Name”. B A confirmation message appears. Press [Yes]. 4 Note ❒ Changing the protocol will clear all settings made under the previous protocol. C Enter each item again.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 91 Thursday, June 2, 2005 1:57 PM Registering Folders G Press Using FTP to Connect Note ❒ To register a shared folder configured in Windows, see p.87 “Using SMB to Connect”. To register an FTP folder A Press the {User Tools/Counter}} key. [Specify Other Auth. Info] on the right side of Folder Authentication.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 92 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) O Press [Change] under Server Name. V Press [OK]. W Press [Exit]. X Press the {User Tools/Counter}} key. Changing a registered folder P Enter the server name, and then press [OK]. Note ❒ You can enter a server name using up to 64 characters. Q Press [Change] under Path. R Enter the path.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 93 Thursday, June 2, 2005 1:57 PM Registering Folders Note ❒ Changing the protocol will clear all settings made under the previous protocol. C Enter each item again. Reference p.87 “To register an SMB folder”. Changing items under FTP A Press [Change] under Port No. B Enter the new port number, and then press [#]. C Press [Change] under Server Name. D Enter the new server name, and then press [OK]. E Press [Change] under Path.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 94 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Registering Names to a Group You can register names to a group to enable easy management of e-mail addresses and folders for each group. To add names to a group, the groups must be registered beforehand. Note ❒ You can register up to 500 groups. ❒ When using Scan to Folder function, you cannot send scan files to a group with over 50 folders registered.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 95 Thursday, June 2, 2005 1:57 PM Registering Names to a Group Registering Names to a Group You can put names that have been registered in the Address Book into a group. When registering new names, you can also register groups at the same time. The group key that you have selected becomes highlighted, and the name is added to it. A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then H Press [OK]. I Press [Exit].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 96 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Removing a Name from a Group A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book Management]. E Select the name to remove from a group. Press the name key, or enter the re g is t e re d n u m be r us in g t he number keys. 4 F Press [Add to Group]. G Select the group from which you want to remove the name.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 97 Thursday, June 2, 2005 1:57 PM Registering Names to a Group H Press [Exit]. I Press the {User Tools/Counter}} key. G Select the group which you want to add to. Deleting a Group A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then The group key that you have selected becomes highlighted, and the group is added to it. press [T TNext]. D Press [Address Book: Program / Change / 4 Delete Group].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 98 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) G Select the group that you want to delete from. H Press [OK]. 4 The group key is deselected and the group is deleted from it.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 99 Thursday, June 2, 2005 1:57 PM Registering a Protection Code Registering a Protection Code You can stop sender's names or folders being accessed by setting a protection code. You can use this function to protect the following: • Folders You can prevent unauthorized access to folders. • Sender's names (when sending emails) You can prevent misuse of sender's names. Note ❒ This function is not available when using Internet Fax to send e-mails.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 100 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Note ❒ Both [Folder Destination] and [Sender] can be selected at the same time. H Press [OK]. I Press [Exit]. J Press the {User Tools/Counter}} key. Registering a Protection Code To a Group User 4 A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book: Program / Change / Delete Group].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 101 Thursday, June 2, 2005 1:57 PM Registering the Transfer Request Registering the Transfer Request This section describes how to register the Transfer Station and Receiving Station used in the fax function's Transfer Request. Note ❒ Before you can use Transfer Request, you must program the Polling ID and set the Transfer Report. S e e “P ro g ra m m i n g a P o l lin g ID”and “Transfer Report”, Facsimile Reference .
JupiterC2_GSG_GB_F2_Pre_FM.book Page 102 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) B Enter the Transfer Request name or key display, and then press [OK]. Reference p.157 “Entering Text” L Specify the Receiving Stations. Note ❒ When specifying the Receiving Stations, use the numbers stored in Quick Dial keys, or Groups in the Transfer Station. To select the title A To associate a Transfer Request name with a title, press the title key under Select Title.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 103 Thursday, June 2, 2005 1:57 PM Registering the Transfer Request M When you have specified all the Receiving Stations, press [OK]. N Press [Exit]. O Press the {User Tools/Counter}} key. Changing a Registered Transfer Station/Receiving Station A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then press [T TNext]. D Press [Address Book: Program / Change / Delete Transfer Request].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 104 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) G Press [OK]. H Press [Exit]. I Press the {User Tools/Counter}} key. Deleting a Registered Transfer Station/Receiving Station A Press the {User Tools/Counter}} key. B Press [System Settings]. C Press [Administrator Tools], and then 4 press [T TNext]. D Press [Address Book: Program / Change / Delete Transfer Request]. E Press [Delete].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 105 Thursday, June 2, 2005 1:57 PM Registering SMTP and LDAP Authentication Registering SMTP and LDAP Authentication SMTP Authentication For each user registered in the Address Book, you can register a login password to be used when accessing an SMTP server. Reference To use an SMTP server, you need to program it beforehand. For details, see "SMTP Server Settings", Network Guide.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 106 Thursday, June 2, 2005 1:57 PM User Tools (System Settings) Note ❒ To change the SMTP Authentication settings, repeat steps H to M. LDAP Authentication 4 E Press the name you want to register or enter the registered number using the number keys Note ❒ To register a name in the Address Book, see p.71 “Registering a Name”. For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an LDAP server.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 107 Thursday, June 2, 2005 1:57 PM 5. Troubleshooting If Your Machine Does Not Operate As You Want The following chart contains explanations of common problems and messages. If other messages appear, follow the instructions displayed. Note ❒ If you cannot make copies as you want because of the paper type, paper size or paper capacity problems, use recommended paper. See p.171 “Copy Paper”. General Problem Causes “Please wait.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 108 Thursday, June 2, 2005 1:57 PM Troubleshooting Problem Causes The main power indicator continues blinking and does not turn off when pressed. This occurs in the following cases: Solutions Close the exposure glass cover or ADF, and check if the machine com• The exposure glass cov- municating with a computer. er or the ADF is open. • The machine is communicating with external equipment. • The hard disk is active. 5 “Self Checking... ” appears.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 109 Thursday, June 2, 2005 1:57 PM If Your Machine Does Not Operate As You Want Problem Causes The Authentication screen appears. Basic Authentication, Win- Enter your login user name and user dows Authentication, or password. See p.24 “When the AuLDAP Authentication is thentication Screen is displayed”. set. “You do not have the privileges to use this function.” is displayed. The use of the function is restricted to authenticated users only.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 110 Thursday, June 2, 2005 1:57 PM Troubleshooting Document Server Problem Solutions "Scanned pages exceeded max. number. Do you want to store the scanned pages as a file?" appears. The number of scanned pages exceeds the capacity per file of the Document Server. You forgot your password. Contact the administrator. To store scanned pages as a file, press [Store File]. Scanned data is stored as a file in the Document Server.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 111 Thursday, June 2, 2005 1:57 PM BLoading Paper BLoading Paper Important ❒ Tray 1 and LCT use A4 Kpaper exclusively. Load only A4 paper at all times. ❒ If you want to load Letter- sized paper (8 1/2" × 11"K) paper in Tray 1 or LCT, contact your sales or service representative. A Pull out the paper tray until it stops. Reference For paper types and sizes, see p.171 “Copy Paper”. To load paper in the bypass tray, see “Copying from the Bypass Tray”, Copy Reference.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 112 Thursday, June 2, 2005 1:57 PM Troubleshooting The following paper sizes are not selected automatically: • B5 JISL • 81/2"×14"L • 81/2"×11"L B With the print side down, align all four sides of two paper stacks, and then load them next to each other in the tray. Each side has a limit of 1,000 sheets. Reference p.127 “If you load a paper size that is not selected automatically”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 113 Thursday, June 2, 2005 1:57 PM BLoading Paper Orientation-Fixed Paper or Two-Sided Paper Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, punched paper, or copied paper) might not print correctly, depending on how the originals and paper are placed. Select [Yes] in Letterhead Setting under Copier/Document Server Features, and then place the original and paper as shown below (see “Letterhead Setting” Copy Reference).
JupiterC2_GSG_GB_F2_Pre_FM.book Page 114 Thursday, June 2, 2005 1:57 PM Troubleshooting DAdding Toner When Dappears, it is time to add toner. R WARNING: • Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations. R CAUTION: • Keep toner (used or unused) and toner containers out of reach of children.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 115 Thursday, June 2, 2005 1:57 PM DAdding Toner Note ❒ The message “DToner is almost empty.” on the display shows a toner name and the telephone number for ordering. ❒ The consumption of toner depends on the humidity, temperature and printing factors such as image size, density, number of prints, paper size, and paper type. Moreover, to preserve print quality, this machine automatically performs periodic maintenance using the toner.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 116 Thursday, June 2, 2005 1:57 PM Troubleshooting When toner remains Toner can remain inside the toner cartridge in certain environments. If this happens, set the toner cartridge again. Toner will be supplied automatically, and you can then continue to use it.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 117 Thursday, June 2, 2005 1:57 PM xClearing Misfeeds xClearing Misfeeds R CAUTION: • The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper. Important ❒ When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings will be lost. ❒ To prevent misfeeds, do not leave any torn scraps of paper inside the machine. ❒ If paper misfeeds occur frequently, contact your service representative.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 126 Thursday, June 2, 2005 1:57 PM Troubleshooting Changing the Paper Size Preparation Be sure to select the paper size with User Tools and the paper size selector. If you do not, misfeeds might occur. See p.56 “Tray Paper Size:Tray 2–4”. Note ❒ Tray 1 and LCT (optional) use only A4Kpaper. To load 8 1/2" × 11"K, contact your service representative. ❒ Procedures for changing the paper size differ depending on the tray (tray 1 or other optional paper tray units).
JupiterC2_GSG_GB_F2_Pre_FM.book Page 127 Thursday, June 2, 2005 1:57 PM Changing the Paper Size F Square the paper, and then load it in the tray with the copying face down. ZJKY290J ADL027S Important ❒ Do not stack paper over the limit mark. ❒ Check the top of the paper is aligned to the right side. Note ❒ If there is space between the side guide and paper, bring the side guide flush against the edge of the paper.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 128 Thursday, June 2, 2005 1:57 PM Troubleshooting E Select the loaded paper size and feed direction, and then press [OK]. The set paper size and feed direction is displayed. 5 F Press the {User Tools/Counter}} key. The initial display is shown. Important ❒ If you want to print on paper that is selected automatically after printing on a paper size that is not selected automatically, you must return the setting to “Auto Detect”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 129 Thursday, June 2, 2005 1:57 PM dAdding Staples dAdding Staples Important ❒ Stapling failures or jams may occur if you use a staple cartridge other than that recommended. Reference For details about the type of finisher, see p.19 “External Options”.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 131 Thursday, June 2, 2005 1:57 PM Removing Jammed Staples Removing Jammed Staples Note ❒ Curled paper may cause staples to jam. To avoid this, turn copy paper over in the tray. If there is no improvement, change to a stiffer copy paper. ❒ After removing jammed staples, staples will not be ejected the first few times you try to use the stapler. Reference For types of finisher, see p.19 “External Options”.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 133 Thursday, June 2, 2005 1:57 PM yRemoving Punch Waste yRemoving Punch Waste Note ❒ While "Punch Receptacle Full" is displayed, you cannot use the Punch function. C Reinstall the punch waste box. 2 Tray Finisher A Open the front cover of the 2 tray finisher. ZDSO030J Note ❒ If you do not, "Punch Receptacle Full " will remain displayed. 5 D Close the front cover of the 2 tray ADL023S B Pull out the punch waste box, and then remove punch waste.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 134 Thursday, June 2, 2005 1:57 PM Troubleshooting Booklet Finisher A Hold the release lever, and then pull out the booklet finisher. ZKVH220J B Pull out the punch waste box, and 5 then remove the paper chips. ZKVH180J C Reinstall the punch waste box. ZKVH190J Note ❒ If the message does not disappear, reinstall the punch waste box. 134 D Attach the booklet finisher.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 135 Thursday, June 2, 2005 1:57 PM Replacing the Stamp Cartridge Replacing the Stamp Cartridge When the stamp begins to fade, replace the cartridge. Note ❒ This stamp cartridge is used for facsimile and scanner functions. C Pull out the old stamp cartridge. Tap the cartridge lock lever several times. The cartridge will eject. Then remove the cartridge, while pushing the lock lever. ❒ Use the cartridge specified for this machine.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 136 Thursday, June 2, 2005 1:57 PM Troubleshooting Adjusting the Colour Registration When the machine is moved, the Fusing Unit is replaced, or after printing repeatedly for some time, registration shifting might occur. By performing colour registration adjustment, you can maintain optimum print results. Auto Colour Registration E Press [OK]. Auto colour registration will be started.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 137 Thursday, June 2, 2005 1:57 PM Adjusting the Colour Registration Note ❒ Thick paper is needed for the adjustment. Prepare thick paper similar to what you normally use. Lor larger thick paA Load the A4L per in the Bypass Tray. Reference For details about paper size and the procedure for loading paper in the Bypass tray, see “Copying from the Bypass tray”, Copy Reference Important ❒ When the toner cartridge is almost empty "Fuser Adjustment cannot be performed.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 138 Thursday, June 2, 2005 1:57 PM Troubleshooting H Compare the sample with the print- ed pattern box at the bottom of the Fuser Adjustment Sheet II. Specify which square in the box matches the sample. If you specify “0”, setting is finished and the display that appeared in step returns. If you specify “-1” or “+1”, the following display appears. 5 Press [Start Printing].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 139 Thursday, June 2, 2005 1:57 PM Adjusting the Colour Registration Checking the Fuser Adjustment Sheet Following image is sample of the test sheet.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 140 Thursday, June 2, 2005 1:57 PM Troubleshooting E Press [Start Printing] and a test pat- Auto Colour Calibration tern will be printed. If a certain colour is strong or the colour of the copy differs from the original, adjust the yellow, magenta, cyan and black balance. Note ❒ If "DToner is almost empty." is shown on the display panel, the test pattern cannot be printed. A Press the {User Tools/Counter}} key. 5 ZFLS110E B Press [Maintenance].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 141 Thursday, June 2, 2005 1:57 PM Adjusting the Colour Registration Returning to the previous setting Note ❒ “Previous Setting” means to return to the previous status before any changes. A Press [Previous Setting] in the “Auto Colour Calibration . When returning the auto colour calibration of the copy function, press [Previous Setting] of the Copier Function.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 143 Thursday, June 2, 2005 1:57 PM 6. Remarks Dos and Don'ts R WARNING: • Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric shock might occur. R CAUTION: • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. Important ❒ Do not turn the power off while the On indicator is lit or blinking.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 144 Thursday, June 2, 2005 1:57 PM Remarks Saving Colour Copies • There is no difference between colour prints and colour copies in terms of fading. However, for long-term storage, make sure to store them in a binder away from direct sunlight. • Toner may melt if a print and a half-dried print are put on top of each other. • Toner may also melt when using solvent type adhesive agents for pasting prints. • When folding prints, toner in the folds will come off.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 145 Thursday, June 2, 2005 1:57 PM Toner Toner Handling Toner R WARNING: • Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations. R CAUTION: • Keep toner (used or unused) and toner containers out of reach of children. Important ❒ Fault may occur if you use toner other than the recommended type. Reference To add toner, see p.114 “DAdding Toner”.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 146 Thursday, June 2, 2005 1:57 PM Remarks Where to Put Your Machine Machine Environment Environments to avoid Choose your machine's location carefully. Environmental conditions greatly affect its performance. • Locations exposed to direct sunlight or other sources of strong light (more than 1,500 lux). • Locations directly exposed to cool air from an air conditioner or heated air from a heater.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 147 Thursday, June 2, 2005 1:57 PM Where to Put Your Machine • Close all covers and trays, including the front cover and bypass tray. ❒ Move the machine carefully. If you do not, it could result in damage and stored files might be lost. ❒ Do not take off the holding stand. ❒ Protect the machine from strong shocks. Impact can damage the hard disk and cause stored files to be lost. As a precautionary measure, files should be copied to another computer.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 148 Thursday, June 2, 2005 1:57 PM Remarks Maintaining Your Machine If the exposure glass, exposure glass cover, or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty. Cleaning the Exposure Glass Cover ❖ Cleaning the machine Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth to remove the water. Important ❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 149 Thursday, June 2, 2005 1:57 PM Cleaning the Dustproof Glass Cleaning the Dustproof Glass The dustproof glass may require cleaning if white lines appear on the print side of the document. A Turn C Slide the cleaning brush in and out slowly 2 to 3 times to clean all four areas. off the power switch, and then unplug the power cable. B Open the front cover and remove the cleaning brush. ZKVH260J ZKVH240J There are four holes for cleaning the dustproof glass.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 150 Thursday, June 2, 2005 1:57 PM Remarks Earth Leakage Breaker To prevent electric shock this machine has an earth leakage breaker. The earth leakage breaker is normally in the on position. Once a month, check that it functions properly by following the procedure below. D Using the tip of a ball-point pen, press the test button of the earth leakage breaker.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 151 Thursday, June 2, 2005 1:57 PM Earth Leakage Breaker G If the finisher is installed, reattach it to the machine. ADL015S Note ❒ The above illustration shows the 2 tray finisher. If you are using the Booklet finisher, reattach it in the same way. H Turn on the main power switch of 6 the machine. Note ❒ If the power does not come on, check if the earth leakage breaker is in the off position. If so, do not turn it to the on position.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 152 Thursday, June 2, 2005 1:57 PM Remarks Replacing the Waste Toner Bottle C Take the new waste toner bottle R WARNING: • Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame. out of the bag. R CAUTION: • The inside of the machine becomes very hot. Do not touch the parts with a label indicating a “hot surface”. Otherwise, an injury might occur.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 153 Thursday, June 2, 2005 1:57 PM Replacing the Waste Toner Bottle F Put the used waste toner bottle into the bag that contained the new waste toner bottle, and then seal the bag. I Slowly close the front cover by pushing the two areas on the left and right. Important ❒ Be sure to handle the bottle carefully so waste toner does not spill. G Insert the new waste toner bottle as shown. AA AFZ019S J Plug in the power cable, and then turn on the power.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 154 Thursday, June 2, 2005 1:57 PM Remarks Other Functions Printing inquiry information Inquiry The inquiry function lets you check the telephone numbers to contact for repairs or ordering toner. Be sure to contact your service engineer to verify the following: ❖ Consumables • Telephone No. to order • Toner • Staple • TX Stamp Name 6 A Press [Print Inquiry List]. B Press the {Start} } key. Inquiry information is printed. C Press [Exit]. D Press [Exit].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 155 Thursday, June 2, 2005 1:57 PM Other Functions Changing Paper Thickness Settings Select [Normal] or [Middle Thick/91105g/m 2 ] depending on the type of plain paper. Note ❒ Settings will not be cleared even when the { Clear Modes} } key is pressed or the power is turned off. ❒ All paper trays are set to [Normal] as default. A Press the {User Tools / Counter}} key. 6 ZFLS110E B Press [Maintenance]. C Press [Plain Paper Type].
JupiterC2_GSG_GB_F2_Pre_FM.book Page 156 Thursday, June 2, 2005 1:57 PM Remarks Counter Displaying the Total Counter You can display the total counter value used for all functions. A Press the {User Tools/Counter}} key. ZFLS110E B Press [Counter]. 6 C To print a counter list, press [Print Counter List]. D Press the {Start}} key. A counter list prints out.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 157 Thursday, June 2, 2005 1:57 PM 7. Entering Text Entering Text This section describes how to enter characters. When you enter a character, it appears at the position of the cursor. If there is a character already at the cursor position, the entered character appears before it.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 158 Thursday, June 2, 2005 1:57 PM Entering Text How to Enter Text Entering letters A Press [Shift] to switch between uppercase and lowercase. B Press the letters you want to enter. Deleting characters A Press [Backspace] or [Delete All] to delete characters.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 159 Thursday, June 2, 2005 1:57 PM 8.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 160 Thursday, June 2, 2005 1:57 PM Specifications ❖ Copy paper size: • Trays: A3L– A5L, 11" × 17"L – 51/2" × 81/2"L • Bypass: A3L– A6L, 11" × 17"L – 51/2" × 81/2"L • Bypass (custom size): Vertical: 90.0 – 305.0 mm, 3.55" – 12.00" Horizontal: 148.0 – 457.2mm, 5.83" – 18.00" • Duplex: A3L– A5K, 11" × 17"L – 51/2" × 81/2"K (except A5L, 51/2" × 81/2" L) • LCT: A4K, 81/2" × 11"K ❖ Paper weight: • Paper tray: 60 – 105 g/m2, 16 – 28 lb. • Bypass tray: 60 – 163 g/m2, 16 – 43.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 161 Thursday, June 2, 2005 1:57 PM Main Unit ❖ Reproduction ratio: Preset reproduction ratios: Metric version Enlargement Inch version 400% 400% 200% 200% 141% 155% 122% 129% 115% 121% Full size 100% 100% Reduction 93% 93% 82% 85% 75% 78% 71% 73% 65% 65% 50% 50% 25% 25% Zoom: From 25 to 400% in increments of 1%. ❖ Maximum continuous copy run: 999 sheets ❖ Paper capacity: • Tray 1, 2: 500 sheets ( 80 g/m2, 20 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 162 Thursday, June 2, 2005 1:57 PM Specifications • Complete system *1 Type 1 Type 2 Type 3 Warm-up about 1.41 kw about 1.41 kw about 1.46 kw Stand-by about 0.28 kw about 0.28 kw about 0.28 kw During printing about 0.95 kw about 0.95 kw about 1.1 kw Maximum less than 1.68 kw less than 1.68 kw less than 1.68 kw *1 The complete system consists of the main unit, ADF, finisher and LCT.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 163 Thursday, June 2, 2005 1:57 PM Main Unit ❖ Weight: Types 1, 2, 3: Approx. 120 kg, 264.6 lb. ❖ HDD: 40 GB × 2 • Capacity for Document Server 37.5 GB • Capacity for memory sorting 14.4–17.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 164 Thursday, June 2, 2005 1:57 PM Specifications Options Exposure Glass Cover Lower this over originals for copying. Auto Document Feeder ❖ Mode: ADF mode, Batch mode, SADF mode, Mixed Size mode, Custom Size Originals mode Auto detect (A4, 81/2" × 11") ❖ Original size: • A3L– B6 JIS *1 KL Vertical : 128–297mm, 5.1"-11.7" Horizontal : 128–432mm, 5.1"-17.0" *2 • 11" × 17"L– 51/2" × 81/2"KL ❖ Original weight: • One-sided originals: 40–128 g/m2 (11–34 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 165 Thursday, June 2, 2005 1:57 PM Options 2 Tray Finisher Finisher Shift Tray 1: ❖ Paper size: A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL ❖ Paper weight: 60 – 105 g/m2, 16 – 28 lb. ❖ Stack capacity: • 500 sheets (A4KL, B5 JISKL, A5K, 81/2" × 11"KL) (80 g/m2, 20 lb.) • 250 sheets (A3L, B4 JISL, 81/2" × 14"L, 11" × 17"L) (80 g/m2, 20 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 166 Thursday, June 2, 2005 1:57 PM Specifications ❖ Power consumption: Less than 60 W (power is supplied from the main unit) ❖ Dimensions (W × D × H): 680 × 620 × 1,030 mm, 26.8" × 24.5" × 40.6" (including trays) ❖ Weight: Approx. 55 kg, 121.3 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 167 Thursday, June 2, 2005 1:57 PM Options ❖ Stack capacity: No Staple: • 1,000 sheets (A4K, B5 JISKL, 81/2" × 11"KL) (80 g/m2, 20 lb.) • 500 sheets (A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L) (80 g/m2, 20 lb.) Staple: • 1000 sheets (A4KL, B5 JISKL, 81/2" × 11"KL) (80 g/m2, 20 lb.) • 500 sheets (A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L) (80 g/m2, 20 lb.) ❖ Staple capacity: • 50 sheets (A4K, B5 JISK, 81/2" × 11"KL) (80 g/m2, 20 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 168 Thursday, June 2, 2005 1:57 PM Specifications Punch Kit (Booklet finisher) ❖ Paper size • 2 holes: A3L, A4KL, B4 JISL, B5 JISKL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL • 4 holes: A3L, A4K ❖ Paper weight: 64 – 128 g/m2 (16–34 lb.) ❖ Power consumption: 60 W (power is supplied from the main unit.) ❖ Dimensions (W × D × H): 137 × 560 × 170 mm, 5.4" × 22.1" × 6.7" ❖ Weight: Approx. 3.0 kg, 6.7 lb Note ❒ Specifications are subject to change without notice.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 169 Thursday, June 2, 2005 1:57 PM Options 2 Tray Paper Unit ❖ Paper weight: 60–105 g/m2 (16–28 lb.) ❖ Paper size: A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11" × 17"L, 8 1/ 2" × 14"L, 81/2" × 13"L, 81/2" × 11"KL, 81/4" × 13"L, 8" × 13"L, 71/4" × 101/2"L, 81/4" × 14"L, 51/2" × 81/2" L ❖ Maximum power consumption: Less than 50 W (power is supplied from the main unit) ❖ Paper capacity: 1,100 sheets (80 g/m2, 20 lb.) × 2 trays ❖ Dimensions (W × D × H): 578 × 648 × 974 mm, 22.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 170 Thursday, June 2, 2005 1:57 PM Specifications Scanner Accessibility Unit This unit lets you operate the machine or scan documents from the side instead of using the control panel on the machine. Note ❒ When the scanner accessibility unit is installed, the control panel and the scanner unit on the machine cannot be used.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 171 Thursday, June 2, 2005 1:57 PM Copy Paper Copy Paper Recommended Paper Sizes and Types The following limitations apply to each tray: Tray type Paper type and weight Metric version Tray 1 60-105 g/m2 (16-28 lb.) A4K, 81/2" × 11"K 500 sheets Tray 2 60-105 g/m2 (16-28 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 172 Thursday, June 2, 2005 1:57 PM Specifications Tray type Paper type and weight Metric version Inch version Paper capacity Bypass tray *1 Standard paper 60-90 g/m2 (16-24 lb.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 173 Thursday, June 2, 2005 1:57 PM Copy Paper *5 *6 *7 If you want to use thick (128–163 g/m2, 34 lb.–43.5 lb.) paper, select [Thick Paper] on the display panel. See “Copying from the Bypass Tray”, Copy Reference. When copying onto label paper from the bypass tray, select [Thick Paper] on the display panel. See “Copying from the Bypass Tray”, Copy Reference. When copying onto OHP transparencies from the bypass tray, select [OHP] on the display panel.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 174 Thursday, June 2, 2005 1:57 PM Specifications Unusable Paper R CAUTION: • Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or machine failure.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 175 Thursday, June 2, 2005 1:57 PM Copy Paper Paper Storage Note ❒ When storing paper, the following precautions should always be followed: • Do not store paper where it will be exposed to direct sunlight. • Avoid storing paper in humid areas (humidity: 70% or less). • Store on a flat surface. ❒ Do not store paper vertically. ❒ Under high temperature and humid conditions, or low temperature and humid conditions, store paper in vinyl bags.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
JupiterC2_GSG_GB_F2_Pre_FM.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=188 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.400000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=188 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 9.400000 mm RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-3-3479-3111 The Netherlands RICOH EUROPE B.V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD.
