Owners manual
128
5. Using On-Screen Menu
WPS
When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup
TM
), you can
use PIN method or push button method to set up the wireless LAN for the projector.
PIN TYPE Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the
SSID security.
PUSH BUTTON TYPE Press the dedicated button of the access point and the projector’s wireless LAN unit to
complete setting for the SSID security.
NETWORK INFORMATION
The following information will be displayed when the projector is connected to a network (wired LAN or wireless LAN).
PROJECTOR NAME
HOST NAME
DOMAIN
NETWORK INFOR-
MATION (WIRED
LAN/WIRELESS LAN)
CONNECTION STATUS, IP ADDRESS, SUBNET MASK, DEFAULT GATEWAY, WINS,
DNS, MAC ADDRESS, SSID, COMMUNICATION MODE, WEP/WPA, CHANNEL, SIG-
NAL LEVEL, AUTHENTICATION, AUTHENTICATION PERIOD
DISPLAY THE INFOR-
MATION IN APPLICA-
TION MENU
Turn on or off the display of the network information.
The meanings of these status statements are described below.
Statement Authentication status
AUTHENTICATED Authentication is done correctly.
FAILURE Authentication failed.
AUTHENTICATING Authentication is in process.
EXPIRED The digital certicate is expired. Or [DATE AND TIME SETTINGS] is not set correctly.
TIME ERROR The [DATE AND TIME SETTINGS] has been cleared. Set the correct date and time.