Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm Spain RICOH ESPAÑA S.A. Avda. Litoral Mar, 12-14, Blue Building, Marina Village, 08005 Barcelona Phone: +34-(0)93-295-7600 The Netherlands RICOH EUROPE B.V. Prof.W.H. Keesomlaan 1, NL-1183 DJ Amstelveen P.O.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
DolphinC2_GBcopy_F_FM.book Page i Friday, February 4, 2005 3:32 PM Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ Manuals provided are specific to machine type. ❒ Adobe Acrobat Reader / Adobe Reader is necessary to view the manuals as a PDF file.
DolphinC2_GBcopy_F_FM.book Page ii Friday, February 4, 2005 3:32 PM ❖ Manuals for DeskTopBinder Lite DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner Driver and Utilities”. • DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder Lite in detail. This guide can be displayed from the [Setup] display when DeskTopBinder Lite is installed.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page vi Friday, February 4, 2005 3:32 PM TABLE OF CONTENTS Manuals for This Machine ...................................................................................... i What You Can Do with This Machine.................................................................. iii How to Read this Manual ......................................................................................1 Names of Major Options ........................................................................
DolphinC2_GBcopy_F_FM.book Page vii Friday, February 4, 2005 3:32 PM Format Overlay ........................................................................................................ 45 Erase Border ............................................................................................................ 47 Erase Inside ............................................................................................................. 48 Erase Outside ......................................................
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 1 Friday, February 4, 2005 3:32 PM How to Read this Manual Symbols The following set of symbols is used in this manual. R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section in the General Settings Guide.
DolphinC2_GBcopy_F_FM.book Page 2 Friday, February 4, 2005 3:32 PM Names of Major Options Major options for this machine are referred to as follows: • Roll Holder Unit Type A→ Roll holder • Roll Feeder Type 480→ Lower tray • Paper Cassette Type 480 → Cut paper tray • Original Tray Type G → Original tray Terms • Long length original/paper Original/paper length longer than 1189 mm, 46.8".
DolphinC2_GBcopy_F_FM.book Page 3 Friday, February 4, 2005 3:32 PM Control Panel This illustration shows the control panel of a machine that has all options fully installed. AHD004S 1. Screen contrast knob 6. {Check Modes}} key Adjusts the brightness of the screen. Press to check the entered copying settings. 2. Indicators Show errors or machine status. For details, see “Control Panel”, General Settings Guide.
DolphinC2_GBcopy_F_FM.book Page 4 Friday, February 4, 2005 3:32 PM 12. Operation switch Press this switch to turn the power on (the On indicator goes on). To turn the power off, press this switch again (the On indicator goes off). See ”Turning On the Power”, General Settings Guide. 13. {Sample Copy}} key Press to make a single sample copy before starting a long copy run.
DolphinC2_GBcopy_F_FM.book Page 5 Friday, February 4, 2005 3:32 PM Display Panel The function items displayed serve as selector keys. You can select or specify an item by lightly pressing them. When you select or specify an item on the display panel, it is highlighted like this: . Keys appearing as cannot be used.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 7 Friday, February 4, 2005 3:32 PM 1. Basics Before Copying Before you start copying, specify the original and copy paper locations. ❖ Paper Capacities For Each Original/Paper Output Original output Capacities Original Exit : Top A1 (D)L or smaller: 50 sheets (plain paper) 20 sheets (translucent paper) • Use originals that are the same size, and of medium or high quality paper.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 9 Friday, February 4, 2005 3:32 PM Before Copying Important ❒ When using the optional carrier sheet, set the original output location to rear original exit. If the original output location is set to top original exit, the original may be damaged. C Press [Rear ], and then press [OK]. 1 Top Original Exit A Press [Original Exit]. Rear Original Exit (Document Roller) A Lower the document roller. B Press [Top], and then press [OK]. ZEDH140E B Press [Original Exit].
DolphinC2_GBcopy_F_FM.book Page 10 Friday, February 4, 2005 3:32 PM Basics D After the original has been eject- ed, pull the document roller forward and remove the original. Front output A Press [Front] under Copy Output Location. 1 Adjusting the Original Tray When using the optional original tray, adjust the hook position to the size of the original. Rear output A Press [Rear] under Copy Output Location. ZEDP071E Copy Output Locations The following copy output locations are available.
DolphinC2_GBcopy_F_FM.book Page 11 Friday, February 4, 2005 3:32 PM Before Copying Using the rear output to eject A0 (E) KPaper When ejecting A0 (E) Ksize paper to the rear output, the leading edge of the paper may become caught in the back of the copy output tray. You can prevent this by attaching the copy output auxiliary guide. 1 A Lower the copy output auxiliary guide and adjust the position.
DolphinC2_GBcopy_F_FM.book Page 12 Friday, February 4, 2005 3:32 PM Basics Originals Sizes and Weights of Recommended Originals 1 ❖ Metric version Where original is placed Original size Original weight Original table Standard sizes: A0K, A1KL, A2KL, A3KL, A4KL, B1K, B2KL, B3KL, B4KL 20.9 – 157 g/m2 and 0.03 – 1 mm thick originals Custom sizes: Length 210 – 15000 mm Width 210 – 950 mm ❖ Inch version Where original is placed Original size Original table Standard sizes 5.6 - 41.8 lb. and 1.
DolphinC2_GBcopy_F_FM.book Page 13 Friday, February 4, 2005 3:32 PM Originals Originals that should be scanned using the carrier sheet The following type of originals should be mounted on the carrier sheet. You should also use the carrier sheet for important originals and for originals you will copy repeatedly.
DolphinC2_GBcopy_F_FM.book Page 14 Friday, February 4, 2005 3:32 PM Basics • Originals not made of paper (such as glass, metal) • Originals with a roll diameter smaller than φ35 mm (φ1.4") • Originals with a roll diameter larger than φ110 mm (φ4.3") Flatten curled originals so they fit within the range shown below. • Front and back curl; R 60 mm (2.4") or more, height 10 mm (0.4") or less 1 ZEDX060E Originals that use more than 20% of the image area, may be faint.
DolphinC2_GBcopy_F_FM.book Page 15 Friday, February 4, 2005 3:32 PM Placing Originals Placing Originals Note ❒ Place the original after any correction fluid or ink has completely dried. Not taking this precaution will result in a dirtied exposure glass and blemished copies. ❒ Dust and residue from pencil-drawn originals can result in a dirtied exposure glass and blemished copies. We recommend using the carrier sheet for this type of original. See p.18 “Setting the Carrier Sheet”.
DolphinC2_GBcopy_F_FM.book Page 16 Friday, February 4, 2005 3:32 PM Basics C Press the {#}} key after all origi- Original Orientation - To stop originals feeding in Place the original of the same orientation as the copy paper on the original table. nals have been scanned. 1 If the originals are feeding in slanted, or jamming, etc., press the {Scanner Stop} } key to stop them feeding in. AHD005S 1.
DolphinC2_GBcopy_F_FM.book Page 17 Friday, February 4, 2005 3:32 PM Placing Originals Placing Custom Size Originals When placing custom size originals, specify the size of the originals. E Press [OK]. F Place the originals, and then press the {Start} } key. 1 Note ❒ Paper with a vertical size of 210– 15000 mm (8.3"–590.5") and a horizontal size of 210–914 mm (8.3"– 35.9") can be specified with this function. Wide Scan ❒ If you do not specify the size, parts of the image may not be copied.
DolphinC2_GBcopy_F_FM.book Page 18 Friday, February 4, 2005 3:32 PM Basics ❒ The machine adjusts to a scan size of the same paper series as the original. If you want to mix the sizes of A and B series when scanning, contact your service representative.
DolphinC2_GBcopy_F_FM.book Page 19 Friday, February 4, 2005 3:32 PM Placing Originals Reference For details about using the carrier sheet to make copies, see p.13 “Originals that should be scanned using the carrier sheet”. 1 A Open the carrier sheet with the transparent sheet face up, and then insert the original also face up. ZEDP020E Note ❒ Align the original with the fold of the carrier sheet.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 21 Friday, February 4, 2005 3:32 PM 2. Copying Basic Procedure Preparation When User Code Authentication is set, the screen for entering a user code will be displayed. Enter your user code (up to eight digits) using the number keys, and then press the {#} } key. Reference For user codes, see "Registering User Codes", General Settings Guide. When Basic Authentication, Windows Authentication, or LDAP Authentication is set, the authentication screen will be displayed.
DolphinC2_GBcopy_F_FM.book Page 22 Friday, February 4, 2005 3:32 PM Copying F Place the originals. Originals feed into the machine, which then starts copying. Reference p.15 “Placing Originals” Note ❒ When [Press Start Key] is selected in the Feed Start Method, copying starts when you press the {Start} } key. See “Feed Start Method”, General Settings Guide”. ❒ To stop originals feeding in, press the {Scanner Stop} } key. See p.16 “To stop originals feeding in”.
DolphinC2_GBcopy_F_FM.book Page 23 Friday, February 4, 2005 3:32 PM Basic Procedure Auto Start Editing Job Preset If you make settings and scan the originals while the message “Scanning originals can be started.” and “Select copy mode and press [Start].” are displayed alternately, your copies will be made once the machine is ready. You can check and change the contents of preset jobs. You also can delete preset jobs. A Press [Reserved Job].
DolphinC2_GBcopy_F_FM.book Page 24 Friday, February 4, 2005 3:32 PM Copying To delete a job after checking its contents A Check the contents of the job. B Press [Delete Job]. C Press [Delete]. 2 Interrupt Copy Use this function to interrupt a long copy job to make urgently needed copies. A Press the {Interrupt}} key. The display returns to the Reserved Job screen. Deleting a Preset Job A Press [Reserved Job]. AHD040S The Interrupt key indicator lights.
DolphinC2_GBcopy_F_FM.book Page 25 Friday, February 4, 2005 3:32 PM Basic Procedure E Press the {Interrupt}} key again. A Press [Bypass]. The Interrupt key indicator goes off. Resuming the previous copy job A Place your originals, and then press the {Start} } key. 2 Exiting interrupt copy A Press the {Clear Modes} } key. Copying from the Paper Bypass Use the paper bypass to copy onto paper sizes that cannot be loaded on the paper rolls, or cut sheet paper. B Make the necessary settings.
DolphinC2_GBcopy_F_FM.book Page 26 Friday, February 4, 2005 3:32 PM Copying F Insert the paper in the paper bypass, copy side up. The paper feeds in automatically and copying starts. 2 AGL059S Important ❒ Insert the paper evenly on both sides and support it with your hands until it feeds in. Note ❒ Insert the paper until you hear the beep. ❒ To make multiple copies, insert an additional sheet after each feeds in.
DolphinC2_GBcopy_F_FM.book Page 27 Friday, February 4, 2005 3:32 PM Copier Functions Copier Functions Selecting Original Type Setting The following image quality modes are available, select one to match your originals: ❖ Drawing For drawings that contain fine lines. Faint lines are clearly reproduced. ❖ Text For originals that contain mainly text, or printed characters. ❖ Text/Photo For originals that contain both text and photographs or pictures. ❖ Others – Generation For originals that are copied.
DolphinC2_GBcopy_F_FM.book Page 28 Friday, February 4, 2005 3:32 PM Copying Adjusting Copy Image Density Preparation You can adjust the copy density to match your originals. There are three types of density function: 2 ❖ Auto Image Density To automatically adjust the image density. ❖ Manual Image Density You can adjust the density of the overall original in seven increments. Note ❒ If Auto Image Density is not selected, press [Auto Image Density].
DolphinC2_GBcopy_F_FM.book Page 29 Friday, February 4, 2005 3:32 PM Copier Functions Selecting Copy Paper Preparation There are two ways to select copy paper: ❖ Auto Paper Select The machine detects the original's size, and then automatically selects a suitable copy paper size based on the magnification. Auto paper select A Make sure [Auto Paper Select] is selected. Note ❒ When Auto Paper Select is not selected, press [Auto Paper Select].
DolphinC2_GBcopy_F_FM.book Page 30 Friday, February 4, 2005 3:32 PM Copying Manual paper select A Select the paper tray or paper by- pass. The selected tray key is highlighted. ❖ When the lower tray (paper roll tray) is installed 2 Note ❒ This function works when Auto Paper Select is selected. See p.29 “Selecting Copy Paper”. ❒ The default for Auto Tray Switching is With image rotation. You cannot use Rotate Copy if this setting is changed to Without image rotation or Off. See p.
DolphinC2_GBcopy_F_FM.book Page 31 Friday, February 4, 2005 3:32 PM Copier Functions Note ❒ When copying onto long paper, the maximum length for which image quality can be guaranteed differs according to paper type and width. ❖ Metric version Paper 728 width mm or Paper above type 727 – 515 mm Plain 3600 2000 2000 mm mm mm 15000 mm Translu- 3600 cent pa- mm per 514 – 364 mm 363 – 210 mm Synchro cut Note ❒ When using Synchro Cut, the paper can be cut from 210 to 15000 mm (8.3" to 590.5").
DolphinC2_GBcopy_F_FM.book Page 32 Friday, February 4, 2005 3:32 PM Copying ❖ Metric version 2 Variable cut Roll paper width Preset K Preset L 841 mm A0K A1L 594 mm A1K A2L 420 mm A2K A3L 297 mm A3K — 210 mm A4K — 728 mm B1K B2L 515 mm B2K B3L 364 mm B3K — 257 mm B4K — 914 mm 1219 mm 610 mm 880 mm 1219 mm 610 mm 800 mm 1189 mm 594 mm 660 mm 1189 mm 594 mm 440 mm 594 mm 297 mm Note ❒ When using Variable Cut, the paper can be cut from 210 to 15000 mm (from 8.
DolphinC2_GBcopy_F_FM.book Page 33 Friday, February 4, 2005 3:32 PM Copier Functions C Place your originals. Sort/Rotate Sort You can put copies into sequentially ordered sets. ❖ Sort Put copies into sequentially ordered sets. Note ❒ Repeat the scanning procedure until all your originals are scanned. ❒ To cancel Sort or Rotate Sort, press the {Clear/Stop} } key. 2 D After the last original is scanned, press the {#} } key. Copying starts.
DolphinC2_GBcopy_F_FM.book Page 34 Friday, February 4, 2005 3:32 PM Copying C If the sample is acceptable, press [Print]. The specified number of copies is made, minus one for the sample copy. Note ❒ If you press [Suspend] after checking the results, return to step A to adjust the copy settings as necessary. Depending on the combination of functions, you may not be able to change certain settings.
DolphinC2_GBcopy_F_FM.book Page 35 Friday, February 4, 2005 3:32 PM Copier Functions ❖ Metric version A Press [User Auto R/E]. Original size Copy size A0K A0, A1, A2, A3, A4, B1 JIS, B2 JIS, B3 JIS, B4 JIS A1KL A2KL A3KL 2 A4KL B1KL B Check that the combination selected for User Auto Reduce/Enlarge is the one you want.
DolphinC2_GBcopy_F_FM.book Page 36 Friday, February 4, 2005 3:32 PM Copying ❖ Inch version B Select a ratio, and then press [OK]. Engineering Enlargement ratios: 129.4%, 200.0%, 258.8%, 400.0% Reduction ratios: 25.0%, 32.4%, 50.0%, 64.7% Architecture Enlargement ratios: 133.3%, 200.0%, 266.7%, 400.0% 2 Reduction ratios: 25.0%, 33.3%, 50.0%, 66.7% You can store up to three ratios of your own for frequently used ratio, but are not preset. The ratios can be set in 0.1% increments. See p.
DolphinC2_GBcopy_F_FM.book Page 37 Friday, February 4, 2005 3:32 PM Copier Functions A Press [Reduce / Enlarge]. ❒ If you make a mistake, press [–1%], [–0.1%], [+0.1%] or [+1%] to readjust the ratio. B Press [OK]. C Select the paper tray. 2 Size Magnification Using the number keys A Press [Mag. Ratio]. This function calculates an enlargement or reduction ratio based on the specified lengths of the original and copy. B Enter the ratio using the number keys.
DolphinC2_GBcopy_F_FM.book Page 38 Friday, February 4, 2005 3:32 PM Copying C Enter the length of the original using the number keys, and then press [#]. Directional Magnification (%) Copies can be reduced or enlarged at different magnifications, horizontally and vertically. Use this function to alter the image. 2 Note ❒ To change the size, press [Clear], and then enter the new one. ❒ You can enter sizes within the following ranges: Metric 1–9999 mm version (increments of 1 mm) 0.1"–99.
DolphinC2_GBcopy_F_FM.book Page 39 Friday, February 4, 2005 3:32 PM Copier Functions D Press [Direct. Mag.%] To enter the ratio using the number keys A Press [Horizontal]. B Enter the ratio using the number keys, and then press [#]. Note ❒ Use the {.} } key to enter a decimal point. ❒ To change the size, press [Clear], and then enter the new one. C Press [Vertical]. D Enter the ratio using the number keys, and then press [#]. E Press [OK].
DolphinC2_GBcopy_F_FM.book Page 40 Friday, February 4, 2005 3:32 PM Copying Note ❒ You can enter sizes within the following ranges: 2 Metric version 1–9999 mm (increments of 1 mm) Inch version 0.1"–99.9" (increments of 0.1") A Press [Reduce / Enlarge]. G Enter the length for “Copy: Vertical” using the number keys, and then press [#]. Note ❒ To change a length, press the key you want to change, and then enter the new value. H Press [OK]. I Select paper tray. Fine Magnification B Press [Specifd.
DolphinC2_GBcopy_F_FM.book Page 41 Friday, February 4, 2005 3:32 PM Copier Functions Note ❒ Fine Magnification is used for origin a ls t h a t ha ve a lre ad y b e en scanned. If you want to apply fine magnification corrections to paper that has stretched due to the paper type or exposure to humid conditions, see "Fine Ratio Adjustment: Copier", General Settings Guide. A Press [Reduce / Enlarge]. Note ❒ You can also make these settings in "Fine Ratio Adjustment: Copier" under System Settings.
DolphinC2_GBcopy_F_FM.book Page 42 Friday, February 4, 2005 3:32 PM Copying ❖ Combine 8 Pages Copies 8 one-sided originals onto one side of a sheet. B Press [Combine]. 2 C Select the number of originals to GCSHVY3E ❖ Orientation of the original and combine image position • Open to leftK originals combine. D Press [OK]. Image Repeat The original image is copied repeatedly. GCSHUY1E • Open to top L originals HE2R0100 GCSHUY2E Reference Related default settings: p.
DolphinC2_GBcopy_F_FM.book Page 43 Friday, February 4, 2005 3:32 PM Copier Functions A Press [Edit / Stamp]. A Press [Edit / Stamp]. 2 B Press [Edit Image]. C Press [Image Repeat]. D Press [OK] twice. E Select the paper tray. B Press [Edit Image]. C Press [Double Copies]. D Press [OK] twice. E Select the paper tray. Double Copies Positive/Negative Use this function to copy an original image twice onto one copy, as shown. Use this function to reverse black and white areas of the original.
DolphinC2_GBcopy_F_FM.book Page 44 Friday, February 4, 2005 3:32 PM Copying A Press [Edit / Stamp]. B Press [Edit Image]. C Press [Partial Copy]. D Press [Y1], and then enter the scan start position (the length from the leading edge of the original) using the number keys. 2 B Press [Edit Image]. C Press [Positive / Negative]. D Press [OK] twice. E Select the paper tray. Note ❒ To change the value, press [Clear], and then enter the new one.
DolphinC2_GBcopy_F_FM.book Page 45 Friday, February 4, 2005 3:32 PM Copier Functions Mirror Image Format Overlay Copies by reversing the image from left to right, as reflected in a mirror. Use this function to combine two images (original + format) onto one copy using the first original. You can store frequently used format original in the machine memory and recall them for future use. 2 ZEDG160E A Press [Edit / Stamp]. AHD006S A Press [Edit / Stamp]. B Press [Edit Image]. C Press [Mirror Image].
DolphinC2_GBcopy_F_FM.book Page 46 Friday, February 4, 2005 3:32 PM Copying D Place the third original. The machine makes a composite copy of the first and third originals. E Place any further originals, as required. 2 Using the stored image as the background original Note ❒ To use this function, you need to program the overlay format in ad van ce . Se e p.46 “Pro gram/Delete Overlay Format”. Program/Delete Overlay Format Preparation The maximum size of original size to be stored is A0(E).
DolphinC2_GBcopy_F_FM.book Page 47 Friday, February 4, 2005 3:32 PM Copier Functions B Select the original orientation. C Place the original, and then press [Start Scanning]. The original is scanned and stored. D Press [Exit] twice. Returns to the initial User Tools / Counter display. Overwriting a stored format A Select a format number you want to overwrite. B Press [Yes]. Important ❒ You cannot restore a format that has been overwritten.
DolphinC2_GBcopy_F_FM.book Page 48 Friday, February 4, 2005 3:32 PM Copying A Press [Edit / Stamp]. D Press [OK] twice. Limitation ❒ For details about the scan size limitations when using the Erase Border function together with the other functions, see p.104 “Scan Size Limitations, by Function”. 2 B Press [Erase]. C Press [Erase Border]. Erase Inside Use this function to copy the original while erasing a specified area. Selecting [Same Width] A Press [Same Width].
DolphinC2_GBcopy_F_FM.book Page 49 Friday, February 4, 2005 3:32 PM Copier Functions A Press [Edit / Stamp]. Erase Outside Use this function to copy the original while erasing outside a specified area. 2 B Press [Erase]. C Select one of the areas from [Erase Inside 1] to [Erase Inside 5]. D Enter the length of “X1” using the number keys, and then press [#]. ABB526S Note ❒ To specify the area you want to erase, you have to define the value of X1, Y1, X2, and Y2.
DolphinC2_GBcopy_F_FM.book Page 50 Friday, February 4, 2005 3:32 PM Copying B Press [Erase]. C Press [Erase Outside]. D Enter the length of “X1” using the number keys, and then press [#]. 2 Note ❒ To change the value, press [Clear], and then enter the new one. E Enter the length of “X2”, “Y1”, and “Y2” in the same way. F Press [OK] three times. Preparation You can select the following types of margin for this function: • Top (+): margin at the leading edge of the original (top of copy).
DolphinC2_GBcopy_F_FM.book Page 51 Friday, February 4, 2005 3:32 PM Copier Functions E Press [OK]. D Enter the start number using the number keys, and then press [OK]. Background Numbering Use this function to have numbers printed on the background of copies. It can help you to keep track of confidential documents. 2 Note ❒ To change the number, press [Clear] or the {Clear/Stop} } key, and then enter the new one. E Press [OK] twice. ZEDG190E Preset Stamp Note ❒ You can set the number from 1 to 999.
DolphinC2_GBcopy_F_FM.book Page 52 Friday, February 4, 2005 3:32 PM Copying ❖ Setting Originals and Stamp Position/Orientation D Select the stamp type. 2 E Press [All Pages] or [1st Page Only] to select the print page. Changing the stamp position, size and density A Press [Change]. B Select the stamp position, size and density, and then press [OK]. AHD008S Note ❒ You can use only one type of stamp at a time. Reference Related default settings: p.90 “Stamp Priority” p.90 “Stamp Language” p.
DolphinC2_GBcopy_F_FM.book Page 53 Friday, February 4, 2005 3:32 PM Copier Functions ❖ Setting Originals and Stamp Position/Orientation User Stamp You can store frequently used characters or symbols, and then use them as a stamp. 2 ZEDG220E Preparation You must have a user stamp alr e a d y s t o r e d . S e e p . 54 “ P ro gram/Delete User Stamp”. You can store up to four types of user stamp. Reference To delete a stored user stamp, see p.55 “Deleting a user stamp”.
DolphinC2_GBcopy_F_FM.book Page 54 Friday, February 4, 2005 3:32 PM Copying A Press [Edit / Stamp]. Program/Delete User Stamp Note ❒ The range of stamp images for readability is 10–432 mm high (0.4"–17") and 10–297 mm wide (0.4"–11"). However, if the value exceeds the maximum area (5,000 mm2, 7.75 inch2), it is automatically adjusted to range. ❒ Up to four frequently used images can be stored in memory. 2 B Press [Stamp]. C Press [User Stamp]. D Select the number for the user stamp.
DolphinC2_GBcopy_F_FM.book Page 55 Friday, February 4, 2005 3:32 PM Copier Functions Note ❒ Stamp numbers displayed with m next to them already have settings. F Adjust the original guides to A3 (B)K K or A4 (A)L L, and then place the original for user stamp on the original table. ❒ If the stamp number is already in use, the machine will ask you if you want to overwrite it. Press [Yes] or [No]. Important ❒ You cannot restore the stamp after it has been overwritten.
DolphinC2_GBcopy_F_FM.book Page 56 Friday, February 4, 2005 3:32 PM Copying G Press the {User Tools/Counter}} key. The default settings are changed, and the machine is ready to make copies. ❖ Setting Originals and Date Stamp Position/Orientation Date Stamp 2 Use this function to print a date stamp on copies. AHD010S • There are five formats of Date Stamp: • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY • DD.MM.YYYY • YYYY.MM.
DolphinC2_GBcopy_F_FM.book Page 57 Friday, February 4, 2005 3:32 PM Copier Functions B Press [Stamp]. C Press [Date Stamp]. D Press [All Pages] or [1st Page Only] to select the print page. F Press [OK] twice. Page Numbering Use this function to print page numbers on your copies. This function is effective when the Sort function is selected. 2 Changing the date format A Press [Change Format]. B Select the date format, and then press [OK].
DolphinC2_GBcopy_F_FM.book Page 58 Friday, February 4, 2005 3:32 PM Copying ❖ Stamp position and orientation of originals C Press [Page Numbering]. D Select the page numbering format. 2 Note ❒ You can specify the pages to be stamped, and numbering. See p.59 “Specifying the first printing page and start number”. AHD012S You can use the page numbering stamp with up to four other stamping functions. Setting the stamp position A Press [Change] on the left side.
DolphinC2_GBcopy_F_FM.book Page 59 Friday, February 4, 2005 3:32 PM Copier Functions Specifying the first printing page and start number Note ❒ The example below shows the first printing page as “2”and the start number as “3”. If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, ) Note ❒ The following explanation uses P1, P2... as an example. The steps are the same for other selections. A Press [Change] on the right side.
DolphinC2_GBcopy_F_FM.book Page 60 Friday, February 4, 2005 3:32 PM Copying If you selected (1/5, 2/5…) A Press [Change] on the right side. B Press [First Printing Page], then enter the original page number from which to start printing using the number keys, and then press the {#} } key. 2 E Press [Total Pages], enter the total number of original pages using the number keys, and then press the {#} } key. F When page designation is complete, press [OK].
DolphinC2_GBcopy_F_FM.book Page 61 Friday, February 4, 2005 3:32 PM Copier Functions D Press [Numbering from / to], and then enter th e page n umb er fro m which to start numbering using the number keys, and then press the {#} } key. E When page designation is complete, press [OK]. F Press [OK] three times. Adjust Print Position Use this function to move (shift) the copy image up, down, left, or right to create a margin.
DolphinC2_GBcopy_F_FM.book Page 62 Friday, February 4, 2005 3:32 PM Copying Storing Data in the Document Server The Document Server enables you to store documents in memory and print them as you want. For details, see General Settings Guide. 2 Important ❒ Machine failure can result in data loss. Important data stored on the hard disk should be backed up. The manufacturer shall not be responsible for any damage that might result from loss of data.
DolphinC2_GBcopy_F_FM.book Page 63 Friday, February 4, 2005 3:32 PM Storing Data in the Document Server - Use the Reduce/Enlarge function to print the stored documents A B C D E F G Press the {Document Server} } key. Select the document to be printed. Press [Print Settings]. Press [Reduce / Enlarge]. Select a ratio, and then press [OK]. Enter the number of copies using the number keys. Press the {Start} } key.
DolphinC2_GBcopy_F_FM.book Page 64 Friday, February 4, 2005 3:32 PM Copying Programs You can store frequently used copy job settings in machine memory and recall them for future use. Note ❒ You can store up to 10 programs. ❒ You can select the standard mode or Program No.10 as the default mode to be set when modes are cleared or reset, or immediately after the operation switch is turned on. See p.86 “Change Initial Mode”. ❒ Paper settings are stored based on paper size.
DolphinC2_GBcopy_F_FM.book Page 65 Friday, February 4, 2005 3:32 PM Programs Changing a Stored Program Deleting a Program A Check the program settings. A Press the {Program}} key. B Press [Delete]. C Press the number of the program Note ❒ To check the contents of a program, recall it. See p.65 “Recalling a Program”. B Repeat steps A to D of “Storing a Program”. C Press [Register]. Repeat steps E and F of “Storing a Program”. Note ❒ When overwritten, the previous program is deleted.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 67 Friday, February 4, 2005 3:32 PM 3. Troubleshooting If Your Machine Does Not Operate As You Want When a Message Appears The following chart contains explanations of common messages. If other messages appear, follow the instructions displayed. Message Problem/Causes Solutions Please wait. The main power has just been turned on, paper type (plain paper/translucent paper/film) was changed, or the machine is otherwise getting ready. Wait for the machine to fully warm-up.
DolphinC2_GBcopy_F_FM.book Page 68 Friday, February 4, 2005 3:32 PM Troubleshooting 3 Message Problem/Causes Solutions Memory is full. The machine's memory is full due to scanning originals or performing a function. The number of originals that can be stored in memory depends on the size of originals and function settings. • When Sort is selected, press [Exit] to copy scanned originals, and then copy remaining originals. The scanned original is too big to rotate.
DolphinC2_GBcopy_F_FM.book Page 69 Friday, February 4, 2005 3:32 PM If Your Machine Does Not Operate As You Want Message Problem/Causes Solutions Add Toner The machine is running out of toner. Follow the on-screen instructions to change the toner cartridge. See “DAdding Toner”, General Settings Guide. Cover is open as shown. Close it. The cover shown on the display is open. Close the cover as shown. Used Toner Bottle is full. Used Toner Bottle is full. Call your service representative.
DolphinC2_GBcopy_F_FM.book Page 70 Friday, February 4, 2005 3:32 PM Troubleshooting Screen Problem Cause Action The screen is off. The screen contrast knob is turned to the dark position. Turn the screen contrast knob until you can see the screen. The machine is in Energy Sav- Press the {Clear Modes/Energy er mode. Saver} } key to cancel Energy Saver mode. The operation switch is turned off. (The Auto Off function has turned the machine off.) Turn on the operation switch.
DolphinC2_GBcopy_F_FM.book Page 71 Friday, February 4, 2005 3:32 PM If You Cannot Make Clear Copies If You Cannot Make Clear Copies Problem Causes Solutions Black or white streaks appear on copies. Image density is too dark. Adjust image density. See p.28 “Adjusting Copy Image Density”. The exposure glass or feed roller is dirty. Clean the exposure glass or feed roller. See “Maintaining Your Machine”, General Settings Guide. The original is dusty. Clean the original and try copying again.
DolphinC2_GBcopy_F_FM.book Page 72 Friday, February 4, 2005 3:32 PM Troubleshooting Problem Causes Solutions Copies are too light. Image density is too light. Adjust the image density setting. See p.28 “Adjusting Copy Image Density”. Damp or rough grain paper is used. For good copy quality, use recommended paper. Note ❒ If you use coated paper (such as thermal fax paper, art paper, carbon paper), damp paper, or rough grain paper, copy image might be too light. 3 Toner fusing is poor.
DolphinC2_GBcopy_F_FM.book Page 73 Friday, February 4, 2005 3:32 PM If You Cannot Make Clear Copies Problem Causes Solutions The background on translucent paper is dirty. More than 50 copies are being made of originals longer than 1189 mm (46.9") with solid blocks of colour (2 mm × 900 mm (0.08" × 35.4") or larger.) Select a proper paper thickness for the copy paper. See “Paper Thickness: Paper Tray” and “Paper Thickness: Paper Bypass”, General Settings Guide.
DolphinC2_GBcopy_F_FM.book Page 74 Friday, February 4, 2005 3:32 PM Troubleshooting If You Cannot Make Copies As You Want This section explains causes of, and solutions for, unexpected copy results. Problem Causes Solutions Misfeeds occur frequently. The paper is folded or creased. Cut away the folded or creased part from the roll paper. Jammed or torn paper is inside the machine. Remove the paper properly. See “xClearing Misfeeds”, General Settings Guide. The paper is curled.
DolphinC2_GBcopy_F_FM.book Page 75 Friday, February 4, 2005 3:32 PM If You Cannot Make Copies As You Want Problem Causes Solutions Copies shift sideways. The paper roll is not set correctly. Set the paper roll correctly, making sure it is straight and not loose. See “CLoading Paper Roll”, General Settings Guide. The original does not match the size in the original table setting. Adjust the original guides to the specified size, and then insert the original along the guides. See p.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 77 Friday, February 4, 2005 3:32 PM 4. User Tools (Copier / Document Server Features) User Tools Menu (Copier / Document Server Features) Note ❒ Depending on the options installed, not all items listed below may be displayed. ❖ General Features (see p.
DolphinC2_GBcopy_F_FM.book Page 78 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) ❖ Reproduction Ratio (see p.86 “Reproduction Ratio”) User Tools item menu Custom Magnification Settings 1–3 Default Metric version: • Setting 1: 70.7% • Setting 2: 100.0% • Setting 3: 141.4% Inch version (Engineering): • Setting 1: 64.7% • Setting 2: 100.0% • Setting 3: 129.4% Inch version (Architecture): • Setting 1: 66.7% 4 • Setting 2: 100.0% • Setting 3: 133.
DolphinC2_GBcopy_F_FM.book Page 79 Friday, February 4, 2005 3:32 PM User Tools Menu (Copier / Document Server Features) User Tools item menu Default Reduce 1–4 Metric version: • Reduce 1: 25.0% • Reduce 2: 35.4% • Reduce 3: 50.0% • Reduce 4: 70.7% Inch version (Engineering): • Reduce 1: 25.0% • Reduce 2: 32.4% • Reduce 3: 50.0% • Reduce 4: 64.7% Inch version (Architecture): • Reduce 1: 25.0% 4 • Reduce 2: 33.3% • Reduce 3: 50.0% • Reduce 4: 66.7% Priority Setting: Reduce/Enlarge 100.
DolphinC2_GBcopy_F_FM.book Page 80 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) ❖ Stamp (see p.90 “Stamp”) Default Size Normal Density Normal Stamp Priority COPY Stamp Language English Background Numbering User Tools item menu 4 Stamp Position Metric version • Position: Top Right Preset Stamp • Top Margin: 24 mm • Right Margin: 24 mm Inch version • Position: Top Right • Top Margin: 1.0" • Right Margin: 1.
DolphinC2_GBcopy_F_FM.book Page 81 Friday, February 4, 2005 3:32 PM User Tools Menu (Copier / Document Server Features) User Tools item menu Format Default Metric version: DD / MM / YYYY Inch version:MM / DD / YYYY Font Stamp Position Font 1 Metric version Date Stamp • Position: Top Left • Top Margin: 8 mm • Right Margin: 32 mm Inch version • Position: Top Left • Top Margin: 0.3" 4 Page Numbering • Right Margin: 0.8" Stamp Setting All Pages Size Auto Superimpose No Stamp Format P1, P2...
DolphinC2_GBcopy_F_FM.book Page 82 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) Accessing User Tools (Copier Features) This section is for key operators in charge of this machine. You can change or set the machine's default settings. Note ❒ Be sure to exit User Tools and return to the initial copy display after all settings are made. This section describes system settings you can set for the copier function.
DolphinC2_GBcopy_F_FM.book Page 83 Friday, February 4, 2005 3:32 PM Accessing User Tools (Copier Features) Exiting User Tools A After changing default settings, press [Exit] on the User Tools main menu. Changes to User Tools are complete, and the machine is ready to copy. 4 AHD026S Note ❒ You can also exit User Tools by pressing the { User Tools/Counter} } key.
DolphinC2_GBcopy_F_FM.book Page 84 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) Settings You Can Change with User Tools For details about displaying settings, see p.82 “Accessing User Tools (Copier Features)”. General Features ❖ Auto Paper Select Priority Auto Paper Select is the default setting. You can cancel this setting. See p.29 “Selecting Copy Paper”.
DolphinC2_GBcopy_F_FM.book Page 85 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools ❖ Auto Image Density Priority You can set whether Auto Image Density is “On” or “Off” when the machine is turned on, reset, or modes are cleared.
DolphinC2_GBcopy_F_FM.book Page 86 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) ❖ Image Density Specifies the copy image density for each original type (Text, Drawing, Text/Photo, Photo, Background Lines, Patched Original, Generation Copy). Note ❒ Default: Normal ❖ Change Initial Mode You can select standard mode or Program No.10 as the mode effective when power is turned on, or modes are cleared. 4 Note ❒ Default: Standard ❖ Max.
DolphinC2_GBcopy_F_FM.book Page 87 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools • Inch version: (Engineering) • Enlarge 1: 129.4% • Enlarge 2: 200% • Enlarge 3: 258.8% • Enlarge 4: 400% • Inch version: (Architecture) • Enlarge 1: 133.3% • Enlarge 2: 200% • Enlarge 3: 266.7% • Enlarge 4: 400% ❒ When selecting [User Enlrg. Ratio], enter a ratio using the number keys (in the range of 101.0 to 400.0%).
DolphinC2_GBcopy_F_FM.book Page 88 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) ❖ Erase Border Width Specifies the default setting for Erase Border. See p.47 “Erase Border”. Note ❒ Default: • Metric version: 10 mm • Inch version: 0.4" ❒ The width can be set as follows: • Metric version: 2 mm - 99 mm (1 mm increments) • Inch version: 0.1" - 2.0" (0.1" increments) 4 ❖ Erase Original Shadow in Combine In Combine Copy mode, you can specify whether to erase a 3 mm, 0.
DolphinC2_GBcopy_F_FM.book Page 89 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools ❖ Margin Adjustment Priority Specifies the default setting for the margin size. You can set the top and bottom margin sizes. See p.50 “Margin Adjustment”. • Broken B • Crop Marks Note ❒ Default: None ❖ Copy Order in Combine You can set the copy order to Left to Right or Top to Bottom when using the Combine function . Note ❒ Default: • Metric version: Up 20 mm Down 20 mm • Inch version: Up 0.
DolphinC2_GBcopy_F_FM.book Page 90 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) Stamp Background Numbering ❖ Size Make settings for the size of background numbers. See p.51 “Background Numbering”. Note ❒ Default: Normal ❖ Density Make settings for the density of background numbers. See p.51 “Background Numbering”. 4 Note ❒ Default: Normal Preset Stamp ❖ Stamp Priority You can select the stamp type given priority when [Preset Stamp] is pressed. See p.
DolphinC2_GBcopy_F_FM.book Page 91 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools • Inch version: • Position: Top Right • Top Margin: 1.0" • Right Margin: 1.0" 4 ❖ Stamp Format You can adjust the stamp's size, density, and print page. • Size You can set the size of the stamp. Note ❒ Default: 1 X • Density You can set the pattern used to print the stamp. Note ❒ Default: Normal ❒ Normal: The stamp is printed on the image. You cannot check which parts will overlap.
DolphinC2_GBcopy_F_FM.book Page 92 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) User Stamp ❖ Program / Delete Stamp You can store, change, or delete a design of your choice as a user stamp. Note ❒ You can store up to four user stamps. See p.53 “User Stamp”. Reference For details about deleting user stamps, see p.54 “Program/Delete User Stamp”. ❖ Stamp Position 1 - 4 You can set the position where the stamp is printed. Press the arrow keys to adjust the position.
DolphinC2_GBcopy_F_FM.book Page 93 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools ❖ Stamp Format 1 - 4 You can adjust the print page for User Stamps 1 to 4 already registered. • Page to Stamp Sets whether to print the stamp on all pages or only the first page. Note ❒ Default: All Pages Date Stamp ❖ Format You can specify the date stamp format. Note ❒ Default: • Metric version: DD / MM / YYYY • Inch version: MM / DD / YYYY 4 ❖ Font You can select the Date Stamp font.
DolphinC2_GBcopy_F_FM.book Page 94 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) • Left Margin: 0.8" ❖ Stamp Setting You can have the date printed on the first page or all pages. 4 Note ❒ Default: All Pages ❖ Size You can set the Date Stamp size. Note ❒ Default: Auto ❖ Superimpose You can have the Date Stamp printed in white where it overlaps black parts of the image.
DolphinC2_GBcopy_F_FM.book Page 95 Friday, February 4, 2005 3:32 PM Settings You Can Change with User Tools ❖ Size You can set the size of the page number. Note ❒ Default: Auto ❖ Page Numbering in Combine You can set page numbering when using the Combine and Page Numbering function together. Note ❒ Default: Per Original ❖ Stamp Position P1, P2... Stamp Position: 1/5, 2/5... Stamp Position: –1–, –2–... Stamp Position: P.1, P.2. Stamp Position: 1, 2... Stamp Position: 1–1, 1–2...
DolphinC2_GBcopy_F_FM.book Page 96 Friday, February 4, 2005 3:32 PM User Tools (Copier / Document Server Features) Input / Output ❖ Rotate Sort: Auto Paper Continue You can continue copying when paper of the required orientation has run out during rotate-sorting. See p.33 “Sort/Rotate Sort”. Note ❒ If you select [No] : • When paper of the required orientation runs out, the machine stops copying and prompts you to supply copy paper. When you load paper, the machine will continue copying.
DolphinC2_GBcopy_F_FM.book Page 97 Friday, February 4, 2005 3:32 PM 5. Specifications Combination Chart The combination chart below shows modes that can be used together. The following tables explains the symbols used in the chart. means that these functions can be used together. × means that these functions cannot be used together. The second function selected will be the function you are working in. $ means that these functions cannot be used together.
DolphinC2_GBcopy_F_FM.book Page 98 Friday, February 4, 2005 3:32 PM Specifications Supplementary Information ❖ Auto Start • The warm-up time is longer when scanning long length originals.
DolphinC2_GBcopy_F_FM.book Page 99 Friday, February 4, 2005 3:32 PM Supplementary Information ❖ Sort • You can use Sort for copy sizes up to A0(E).
DolphinC2_GBcopy_F_FM.book Page 100 Friday, February 4, 2005 3:32 PM Specifications ❖ Metric version 5 Ratio (%) Original size → Paper size 400.0 (16 times in area ratio) A4→A0 282.8 (8 times in area ratio) A3→A0, A4→A1, B4→B1 200.0 (twice in area ratio) A2→A0, A3→A1, A4→A2, B3→B1, B4→B2 141.4 (1/2 in area ratio) A1→A0, A2→A1, A3→A2, A4→A3, B2→B1, B3→B2, B4→B3 70.7 (1/4 in area ratio) A0→A1, A1→A2, A2→A3, A3→A4, B1→B2, B2→B3, B3→B4 50.0 A0→A2, A1→A3, A2→A4, B1→B3, B2→B4 35.
DolphinC2_GBcopy_F_FM.book Page 101 Friday, February 4, 2005 3:32 PM Supplementary Information ❖ Zoom • You can set the magnification ratio from 25.0 to 400.0%. • You can select a ratio regardless of original size, or paper roll cut method. With certain ratios, parts of the image might not copy or margins will appear. ❖ Size Magnification • You can set the magnification ratio from 25.0 to 400.0%.
DolphinC2_GBcopy_F_FM.book Page 102 Friday, February 4, 2005 3:32 PM Specifications ❖ Format Overlay • When the sizes of the format (background original) and original to be overlaid on the format are different, the image is created at the size of the overlaid original. • The maximum paper size is A0 (E). However, if you create a copy using A0(E) size paper, the composite image data is lost. • When scanning the format (background original), the output image may be blurred.
DolphinC2_GBcopy_F_FM.book Page 103 Friday, February 4, 2005 3:32 PM Supplementary Information ❖ Adjust Print Position • You can adjust the print position from 200 mm (7.9") left to 200 mm (7.9") right, and from 200 mm (7.9") up to 200 mm (7.9") down in increments of 1 mm (0.1"). • If you set the margin too long for the original, parts of the image might not copy. • When using with the stamp functions, the stamp position moves according to the orientation and length of the print position setting.
DolphinC2_GBcopy_F_FM.book Page 104 Friday, February 4, 2005 3:32 PM Specifications Scan Size Limitations, by Function The following chart shows scan size limitations for the Adjust Print Position, Margin Adjustment, Edit, and Stamp functions.
DolphinC2_GBcopy_F_FM.book Page 105 Friday, February 4, 2005 3:32 PM Settings Record Sheet Settings Record Sheet ❖ Program Record Sheet 5 AHD014S Make copies of this sheet to keep a record of your program settings.
DolphinC2_GBcopy_F_FM.book Page 106 Friday, February 4, 2005 3:32 PM Specifications ❖ Stored Format Record Sheet 5 AHD015S Make copies of this sheet to keep a record of your format settings.
DolphinC2_GBcopy_F_FM.book Page 107 Friday, February 4, 2005 3:32 PM Settings Record Sheet ❖ User Stamp Record Sheet 5 Make copies of this sheet to keep a record of your user stamps.
DolphinC2_GBcopy_F_FM.book Page 108 Friday, February 4, 2005 3:32 PM Specifications Magnification Ratio Chart ❖ Metric version Copy size (mm) Original size % A0 A1/B1 A2/B2 A3/B3 A4/B4 A0 100.0 70.7 50.0 35.4 25.0 A1/B1 141.4 100.0 70.7 50.0 35.4 A2/B2 200.0 141.4 100.0 70.7 50.0 A3/B3 282.8 200.0 141.4 100.0 70.7 A4/B4 400.0 282.8 200.0 141.4 100.0 D C B A ❖ Inch version (Engineering) Copy size (in) 5 Original size % E E 100.0 64.7 50.0 32.4 25.0 D 129.
DolphinC2_GBcopy_F_FM.
DolphinC2_GBcopy_F_FM.book Page 110 Friday, February 4, 2005 3:32 PM INDEX A Accessing user tools (Copier Features), 82 Adjusting copy image density, 28 Adjust Position, 87 Adjust print position, 61, 103 Administrator Tools, 96 Auto image density, 28 Auto image density priority, 85 Auto paper select, 29 Auto paper select priority, 84 Auto reduce/enlarge, 34 Auto start, 23, 98 Auto tray switching, 84 B Background Lines, 27 Background No.
DolphinC2_GBcopy_F_FM.
DolphinC2copyGB_Index Page 112 Tuesday, September 27, 2005 1:35 PM Setting the carrier sheet, 18 Setting the length of copy paper cut, 30 Sharp (#) key, 4 Size magnification, 37, 101 Sizes and weights of recommended originals, 12 Sort, 33, 99 Specifications, 97 Stamp, 90 Start key, 4 Storing data, 62 program, 64 Superimpose, 94, 95 Supplementary information, 98 Synchro cut, 31 T Text, 27 Text/Photo, 27 Top original exit, 9 Troubleshooting, 67 screen, 70 U User Auto R/E, 87 User auto reduce/enlarge, 34 Us
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=120 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 6.000000 mm Spain RICOH ESPAÑA S.A. Avda. Litoral Mar, 12-14, Blue Building, Marina Village, 08005 Barcelona Phone: +34-(0)93-295-7600 The Netherlands RICOH EUROPE B.V. Prof.W.H. Keesomlaan 1, NL-1183 DJ Amstelveen P.O.