User Manual

34
If you are using the camera for the first time, read this section.
Quickly Shooting Pictures (Full-press)
Full-press the shutter release button for quick focusing, so as not to
miss a shooting opportunity.
1 Press the power button to turn the
camera on, and turn the mode dial to
5/K.
2 Compose your shot by looking at the LCD monitor
or through the viewfinder, make sure the subject is
centered, and gently press the shutter release
button fully.
• The still image you have taken appears momentarily on the LCD
monitor and is recorded to the internal memory or SD memory card.
Caution-----------------------------------------------------------------------------------------------
Full-press is likely to cause the camera to shake. Hold the camera firmly with both
hands and shoot.
Note ---------------------------------------------------------------------------------------------------
You can set the time the still image you have taken appears on the LCD monitor. You
can also set the image not to appear after it is taken. (GP.116)
Shooting
The shutter release button works in two steps. You can press the
shutter release button halfway down (half-press) and press it all
the way down (full-press).
CALS
CALS
L7360874_En_00_0_bookfile.book Page 34 Friday, October 13, 2006 12:56 PM