User Manual

146
7
Downloading Images to Your Computer
Install the required software on your computer from the CD-ROM
before connecting the camera.
Caution------------------------------------------------------------------------------------------
Do not install the software when the camera is connected to your computer with a USB
cable.
1 Turn on your Macintosh and insert the Caplio Software
CD-ROM in the CD-ROM drive.
2 Double-click the [Caplio Software] icon.
3 Open the [Mac OS X] folder.
• Folders named [Mac OS X 10.1 - 10.3] and [Mac OS X 10.4] appear.
4 Click the folder for your OS.
• Double click [Mac OS X 10.1 - 10.3] if you are using Mac OS X 10.3 or
earlier. Double click [Mac OS X 10.4] if you are using Mac OS X 10.4
or later. The [Caplio Mounter] icon appears.
5 Double-click [Caplio Mounter].
• The [Install Caplio Mounter] screen
appears.
• The [Caplio Mounter] in the [Mac OS X
10.4] folder cannot be installed in Mac
OS X 10.1 to 10.3.
6 Click [Continue].
• The installation Readme file appears. Click [Continue].
7 Click [Continue].
• The screen to select the destination disk appears.
Installing the Software Required for Handling
the Camera and Images on Your Computer
(Mac OS X 10.1.2 to 10.4.6)
L7360874_En_00_0_bookfile.book Page 146 Friday, October 13, 2006 12:56 PM