User Manual

192

Using the Wireless LAN Function (Only for Caplio 500SE-W)

Overview of Transfer Process via a Wireless LAN

1 Make advanced file transfer settings. (GP.194)

Use the provided Caplio Setting software to make advanced

settings for sending files via wireless LAN.

If no FTP server is available, set up your computer to be the Caplio

server before making the advanced settings. (Only for sending via

FTP) (GP.199)

2 Create a communication list. (GP.202)

Create a communication list combining the desired settings made

in Step 1.

3 Transfer the communication list from the camera to

the computer. (GP.202)

Connect the computer to the camera using the provided USB cable

and transfer the communication list to the internal memory of the

camera. You can also use the SD memory card to import the

communication list to the camera. (GP.205)

You can also correct the destination setting on the camera.

(GP.207)

4 Send files.

Use the Expanded Settings menu on the camera to set the

communication method to wireless LAN (GP.193), and send the

files from the camera. There are two ways to send files.

• FILE SEND (GP.209)

Select and send files in playback mode.

• QUICK SEND MODE (GP.214)

Immediately after you shoot a still image, you can send that file

to another device.

When sending files, you can use the [SEND TO] screen displayed

at the time of sending the files to specify the destination, or you can

use the Expanded Settings menu to specify the destination

beforehand. (GP.219)

Computer settings using

the provided Caplio Setting

software

L7360874_En_00_0_bookfile.book Page 192 Friday, October 13, 2006 12:56 PM