User Manual

189
9
Using the GPS Function
You can set the standard of the GPS information displayed on the
monitor.
1 Display the Expanded Settings menu.
• For the operating procedure, see P.155.
2 Press the " button to select [GPS DISP MODE] and
press the $ button.
3 Press the !" buttons to select
the desired setting.
4 Press the MENU/OK button, or
# button and press the MENU/
OK button.
Setting the Display Standard (GPS DISP MODE)
Available Settings
LAT/LON (Displays latitude and longitude) *Default setting
UTM (Displays Universal Transverse Mercator Projection (UTM) coordinates.)
MGRS (Displays Military Grid Reference System (MGRS) coordinates.)
ALL (Displays all information above)
L7360874_En_00_0_bookfile.book Page 189 Friday, October 13, 2006 12:56 PM