User's Manual

3
45
Shooting
You can set the Noise Reduction
setting when shooting with a high ISO
sensitivity in the control panel or
[High-ISO NR] of the A2 menu.
When [Custom] is selected, the noise
reduction level can be set according
to the ISO sensitivity in the A2
menu.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
Set in the control panel or [AE
Metering] of the A1 menu.
t Memo
• In [5 Link AE and AF Point] of the E1 menu, the metering
point and the AF point can be linked.
Noise Reduction when Shooting with
a High ISO Sensitivity
v/A2
Auto
Applies Noise Reduction at optimally calculated
levels throughout ISO range.
Low/
Medium/
High
Applies Noise Reduction at constant chosen
level throughout ISO range.
Custom
Applies Noise Reduction at user-defined levels
for each ISO setting.
Off
Does not apply Noise Reduction at any ISO
setting.
High-ISO NRHigh-ISO NR
AutoAuto
CancelCancel
OKOK
1
100100
200200
400400
800800
16001600
32003200
64006400
ISOISO
ISOISO
ISOISO
ISOISO
ISOISO
ISOISO
ISOISO
High-ISO NRHigh-ISO NR
ResetReset
AE Metering
v/A1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit locations, this mode automatically
adjusts exposure.
B
Center-
weighted
Meters the brightness with an emphasis on the
center of the sensor.
The sensitivity increases at the center and no
automatic adjustment is performed even in
backlit conditions.
C Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
AE MeteringAE Metering
Multi-segmentMulti-segment
CancelCancel
OKOK