Printer Operating Instructions
Table Of Contents
- Operating Instructions Troubleshooting
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- 1. When the Machine Does Not Operate As Wanted
- 2. Troubleshooting When Using the Copy Function
- 3. Troubleshooting When Using the Facsimile Function
- 4. Troubleshooting When Using the Printer Function
- 5. Troubleshooting When Using the Scanner Function
- 6. Adding Paper, Toner and Staples
- 7. Clearing Misfeeds
- 8. Remarks
- INDEX
Maintaining Your Machine
101
8
Maintaining Your Machine
If the exposure glass, exposure glass cover, or ADF belt is dirty, copy clarity may
be reduced. Clean these parts if they are dirty.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth
to remove the water.
Cleaning the Exposure Glass
This section describes how to clean the exposure glass and the scanning glass.
Clean 1 and 2.