Printer Operating Instructions
Table Of Contents
- Operating Instructions Troubleshooting
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- 1. When the Machine Does Not Operate As Wanted
- 2. Troubleshooting When Using the Copy Function
- 3. Troubleshooting When Using the Facsimile Function
- 4. Troubleshooting When Using the Printer Function
- 5. Troubleshooting When Using the Scanner Function
- 6. Adding Paper, Toner and Staples
- 7. Clearing Misfeeds
- 8. Remarks
- INDEX
25
3. Troubleshooting When
Using the Facsimile Function
This chapter describes likely causes of and possible solutions for facsimile func-
tion problems.
Adjusting the Volume
This section describes how to adjust the volume.
You can change the volume of the following sounds that the machine makes.
❖ On Hook Mode
Heard when the {On Hook Dial} key is pressed.
❖ At Transmission
Heard when the machine sends a document.
❖ At Reception
Heard when the machine receives a document.
❖ At Dialing
Heard after pressing the {Start} key, until the line connects to the destination.
❖ At Printing
Heard when a received document is printed. See “Print Completion Beep”,
Facsimile Reference.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Check that the [Gen. Settings/ Adjust] display appears.