USER MANUAL Preparation STEP1 Charging the camera Connect the camera to your computer using the provided USB cable to charge it. The power lamp lights green during charging and goes out when the camera is fully recharged. (The lamp flashes in green when the remaining battery level is low.) * The camera is charged in approx. 200 minutes (at 25°C (77°F)). * When the remaining battery level is low, it may take a while for the camera to be recognized by the computer.
STEP2 Installing computer application "RICOH THETA" 1. Download the app suitable for your computer. For Windows users (start downloading) For Mac users (start downloading) 2. Double click the file downloaded and install it following the on-screen instructions. When a screen as shown in the diagram below appears, the installation is complete.
STEP3 Checking the camera firmware version 1. Start computer app"RICOH THETA". 2. Select [File] → [Firmware Update] in the menu. 3. Follow the instructions on the screen to connect the camera to your computer using the provided USB cable. * Internet connection of the computer is necessary. 4. Click [OK] and Check the firmware version. * If the firmware isn't the latest version, update it according to the message. 5. After checking the firmware version, click [OK] and disconnect the USB cable.
STEP4 Installing smartphone app "RICOH THETA S" 1. Access a site to download smartphone apps and search for "RICOH THETA S" Or install the app from the link below. For iPhone users For Android users 2. After installing, the icon as shown in the figure will be added.
STEP1 Starting the camera 1. Press and hold the power button. Camera status lamp flashes in blue slowly during startup. 2. When the camera is ready for use, the Camera status lamp lights in blue.
STEP2 Connecting the camera to a smartphone 1. Press the wireless button. The wireless lamp flahes in blue. 2. Display the Wi-Fi™ settings of the smartphone. 3. Check the serial number printed at the bottom of the camera. * The serial number printed at the bottom of the camera is the same as the SSID and password. 4. Select "THETA*******.OSC" from the network list and enter the password. * "*********" of SSID part is indicated by (B). * The password is indicated by (A). 5.
STEP3 Starting the smartphone app "RICOH THETA S" 1. Start "RICOH THETA S" app on the smartphone. 2. Tap "Cam imagpes" on the bottom left of the screen.
STEP4 Checking and changing the camera settings Tap [Settings]. Change [Change Wi-Fi password]/[Sleep mode]/[Camera shutter volume]/Transfer method]. * The date and time of the camera are synchronaized wih the smartphone when the cmaera is connected to the smartphone and "RICOH THETA S" of smartphone app is started. * "Wi-Fi Password", "Sleep mode" and "Camera shutter volume" can be set only when the camera is connected to the smartphone.
Taken with the camera STEP1 Starting the camera 1. Press and hold the power button to start the camera. 2. Press the mode button to select the video mode.
STEP2 Video shooting Press the shutter button to start shooting. Press it again to stop shooting. To learn more about how to view videos, click here. To learn more about how to share videos, click here.
STEP1 Starting the camera 1. Press and hold the power button to start the camera. 2. Press the mode button to select the video mode. 3. Confirm that the wireless lamp is flashing. If it is off, press the wireless button. ・ From the RICOH THETA S app remote shooting screen, you can switch shooting modes with the still image button/video button.
STEP2 Connecting the camera to a smartphone 1. Display the Wi-Fi™ settings of the smartphone. 2. Check the serial number printed at the bottom of the camera. * The serial number printed at the bottom of the camera is the same as the SSID and password. 3. Select "THETA*******.OSC" from the network list and enter the password. * "*********" of SSID part is indicated by (B). * The password is indicated by (A). 4. When the wireless lamp lights in blue, the camera is connected to the smartphone.
STEP3 Starting the smartphone app "RICOH THETA S" Start "RICOH THETA S" app on the smartphone.
STEP4 Remote shooting When you tap the [Shoot] button at the bottom center of the screen, shooting will start. Press it again to stop shooting. To learn more about how to view videos, click here. To learn more about how to share videos, click here.
STEP1 Starting the camera 1. Press and hold the power button to start the camera. 2. Confirm that the wireless lamp is flashing. If it is off, press the wireless button.
STEP2 Connecting the camera to a smartphone 1. Display the Wi-Fi™ settings of the smartphone. 2. Check the serial number printed at the bottom of the camera. * The serial number printed at the bottom of the camera is the same as the SSID and password. 3. Select "THETA*******.OSC" from the network list and enter the password. * "*********" of SSID part is indicated by (B). * The password is indicated by (A). 4. When the wireless lamp lights in blue, the camera is connected to the smartphone.
STEP3 Starting the smartphone app "RICOH THETA S" 1. Start "RICOH THETA S" app on the smartphone. 2. Tap "Cam imagpes" on the bottom left of the screen.
STEP4 Transferring videos 1. Tap "Cam imagpes". 2. Start transfer by tapping [Thumbnail] for the video you want to transfer. ・ The video camera mark and file size are displayed on the videos. 3. After the transfer is completed, the playback is available.
STEP5 Viewing video rom the next time it can be viewed from the [Device images]. * Note that if an image is deleted from the "Photos" App, it is also deleted from "Device images". View examples on the theta360.
STEP1 Starting the smartphone app "RICOH THETA S" 1. Start "RICOH THETA S" app on the smartphone. 2. Tap "theta360". 3. Tap the video you want to watch.
STEP2 Viewing videos iPhone: Tap "WATCH Video". Android: [JUST ONCE] or [ALWAYS] -Open with THETA S.
STEP1 Saving video onto your computer 1. Connect the camera to the using the provided USB cable. Widnows: 2. Select "Open device to view files". 3. Open the folder of [DCIM]-[***RICOH] and save video file (.mp4) onto your computer from the camera. Mac: 2. Using the "Photos" app or "Image Capture", import image to your Desktop, or other location.
STEP2 Selecting video Start the computer application, and then drag and drop imported videos (.mp4). * You can also launch it by selecting [File] >> [Open] in the menu.
STEP3 Viewing video 1. Click [Select]. 2. Select the folder to save the file and click [Start]. 3. After conversion of the video file, playback starts. * At the next playback, choose the video file (.mp4) converted by selecting [File] >> [Open]. * You can not directly view the image in the camera. Save the file to your computer to view it.
