Facsimile Operating Instructions

OTHER FUNCTIONS
çê
2
OTHER FUNCTIONS
Energy Saver Mode—Saving
Energy
If you do not operate the machine for
a certain period after copying, or
when you press and hold the {
Clear
Modes/Energy Saver
} key for more than
one second, the display disappears
and the machine enters Energy Saver
mode. When you press the {
Clear
Modes/Energy Sever
} key again, when
the originals are set in the document
feeder, or when the platen cover or
document feeder is opened, the ma-
chine returns to the ready condition.
In Energy Saver mode, the machine
uses less electricity.
The Energy Saver mode makes a two-
step reduction in electricity: one for
the period up to the time set for Low
Power mode, the other for the period
after that time.
Note
❒ The period for which the machine
remains in Energy Saver mode (i.e.
the period until the mode is turned
off to return to the ready condi-
tion) varies with the effectiveness
of energy saving.
❒ If you press the {
Clear Modes/Energy
Saver
} key during the operation,
the current settings will be cleared.
Reference
See “8. Low Power Timer” of the
System Settings.
Interrupt—Temporarily
Stopping One Job To Copy
Something Else
You can make urgently needed copies
during a multi-copy run.
A Press the { Interrupt } key.
The key indicator lights.
B Remove the originals currently
set for copying, and set your orig-
inals for interrupt copying. Make
your copies.
C After interrupt copying, remove
the originals for interrupt copy-
ing and the copies.
D Press the { Interrupt } key again.
The key indicator goes off.
E Reset the previous originals.
Then, press the {
Start } key.
Note
❒ The previous copy settings are
recalled and the previous copy
job can be resumed by pressing
the {
Start } key.
User Codes
If the machine is set to use the User
Code function, operators must input
their user codes before the machine
can be operated. The machine keeps
count of the number of copies made
under each user code.
Note
❒ When the machine is set for user
codes, the machine will prompt