Facsimile Operating Instructions

NOTICE

CAUTION:

Use of controls, adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

Shielded interconnect cables must be employed with this equipment to ensure

compliance with the pertinent RF emission limits governing this device.

Although this equipment can use either loop disconnect or DTMF signalling,

only the performance of the DTMF signalling is subject to regulatory require-

ments for correct operation. It is therefore strongly recommended that the equip-

ment is set to use DTMF signalling for access to public or private emergency

services. DTMF signalling also provides faster call set up.

Note

❒ Some illustrations may be slightly different from your machine.

❒ Certain options may not be available in some countries. For details, please

contact your local dealer.

Notice about the Telephone Consumer Protection Act (Valid in USA

only).

The Telephone Consumer Protection Act of 1991 among other things makes it

unlawful for any person to send any message via a telephone fax machine unless

such message clearly contains in a margin at the top or bottom of each transmit-

ted page or on the first page of the transmission, the date and time it is sent and

an identification of the business, other entity, or other individual sending the

message and the telephone number of the sending machine or such business,

other entity or individual. This information is transmitted with your document

by the TTI (Transmit Terminal Identification) feature. The telephone number

provided may not be a 900 number or any other number for which charges ex-

ceed local or long distance transmission charges. In order for you to meet the re-

quirement, your machine must be programmed by following the instructions in

the accompanying Operation Manual. In particular, please refer to the chapter

of Installation. Also refer to the TTI (Transmit Terminal Identification) program-

ming procedure to enter the business identification and telephone number of the

terminal or business. Do not forget to set the date and time.

Thank you.

Direct (or indirect reflected eye contact with the laser beam may cause serious eye dam-

age. Safety precautions and interlock mechanisms have been designed to prevent any

possible laser beam exposure to the operator.