Facsimile Operating Instructions

6(77,1*6ý<28ý&$1ý&+$1*(ý:,7+ý7+(ý86(5ý722/6
ëì
ë
System Settings
3
/
6
Menu Description
09. Energy Saver Mode The machine enters Energy Saver mode in the following
cases:
• If you hold down the {
Clear Modes/Energy Saver } key for
about a second or more.
• When the preset time selected with the Low Power Timer
has passed.
Reference
See “08. Low Power Timer” in ⇒ P.20 “System Settings
2
/
6
”.
In Energy Saver mode, power consumption is saved as
shown below, as compared with Stand-by mode.
• Level 1 (default): Saving about 25 %
• Level 2: Saving about 30 %
Warm-up time required for Energy Saver mode to return to
the ready condition is as follows:
• Level 1 (default): About 3 seconds
• Level 2: About 10 seconds
Note
❒ Default: Level 1
❒ The values above are references applicable to Type 1
(mainframe only).
10. Auto Off Timer The machine turns itself off automatically to conserve ener-
gy after your job is finished, after the selected time. This
function is called “Auto Off ”. The time can be set from 1 to
240 minutes.
Note
❒ Default: 60 minutes
❒ Auto Off might not be effective when the machine is in
the following conditions:
• An error message is displayed.
• The remaining memory space for facsimile mode is
less than 100%.
❒ To return to the ready condition from Auto Off, the ma-
chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.
❒ When the machine receives a fax in Auto Off mode, it au-
tomatically prints the fax.