Facsimile Operating Instructions

GETTING STARTED
14
1
ACCEPTABLE TYPES OF ORIGINALS
Make sure your originals are completely dry before setting them in the machine.
Originals containing wet ink or correcting fluid will mark the exposure glass and
resulting image will be affected.
Acceptable Original Sizes
Limitation
❒ When using 2–sided transmission, A5K and HLTK cannot be available.
Originals Unsuitable for the Document Feeder (ADF)
Do not set the following types of originals in the Document Feeder (ADF) be-
cause they may be damaged. Place them on the exposure glass instead.
• Originals of sizes other than those specified in the previous table
• Originals containing staples or clips
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermosensitive paper, art paper,
aluminum foil, carbon paper, or conductive paper
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin and soft originals
• Originals of inappropriate weight (see table above)
Where original is
set
Acceptable original size Maximum
number of
sheets
Paper thickness
Exposure glass Maximum A3 (297
×
420
mm), 11"
×
17" (279
×
432
mm)
1 ----
Document Feeder
(ADF) Single Sided
Document
Fax transmission: A5
L
to A3
L
(up to 432mm
long) 8"
×
5
1
/
2
"
L
to 11"
×
17" (DLT)
L
50
52 - 128 g/m
2
(14 - 34lb
in inch version)
Document Feeder
(ADF) Double-Sid-
ed Document
Fax transmission: A5
L
to A3
L
(up to 432mm
long) 8"
×
5
1
/
2
"
L
to 11"
×
17" (DLT)
L
50
52 - 105 g/m
2
(14 - 28lb
in inch version)