Facsimile Operating Instructions

ADVANCED TRANSMISSION FEATURES
88
4
TRANSMISSION DEADLINE (TRD)
If you have to send an urgent mes-
sage and the line is busy, this feature
saves you standing by the machine
and redialing the number. If the mes-
sage cannot be sent the first time, the
machine redials automatically at in-
tervals of five minutes any number of
times until the deadline passes. After
the deadline passes, the Transmission
Result Report is automatically print-
ed. This indicates whether or not the
message was sent within the dead-
line.
Limitation
❒ You can not specify a deadline
more than 24 hours into the future.
Note
❒ If the message cannot be sent be-
fore the deadline and the number
of redials is less than 5, the ma-
chine continues redialing until it
has redialed five times then prints
the Transmission Result report. If
the number of redials has already
reached 5, the machine prints the
Transmission Result report and
stops transmission.
A Set your original and select any
scan settings you require.
B Press
[
Mode
]
.
The Transmission Mode menu ap-
pears.
C Enter the “Trans. Deadline” func-
tion number with the number
keys.
Note
❒ If the appropriate display is not
shown, press
[
↑
↑↑
↑
Prev.
]
or
[
↓
↓↓
↓
Next
]
.
D Enter the deadline with the num-
ber keys.
Note
❒ If the current time on the dis-
play is not correct, adjust it. ⇒
P.208
“Date/Time”
❒ To enter a number smaller than
10, add a leading zero.
❒ If you make a mistake, press the
{
{{
{
Clear/Stop
}
}}
}
key and try again.
❒ To cancel the Transmission
Deadline, press
[
Cancel
]
. The
Transmission Mode menu is
shown.
E Press
[
OK
]
.
The Transmission Mode menu is
shown. A check mark is added to
“Trans. Deadline”.
ND1X02E9