Facsimile Operating Instructions

ADVANCED TRANSMISSION FEATURES
92
4
B Enter the 4 character Polling ID
with letter keys/ number keys
and the letter (A–F).
Note
❒ If you make a mistake, press
the
{
{{
{
Clear/Stop
}
}}
}
key and try
again.
0000 and FFFF is not available.
C Press
[
S
SS
S
File
]
and specify
whether to save the stored orig-
inal.
Each time you press the key, the
text at the middle right corner of
the display toggles between
“Save” and “Use once”.
Note
❒ To delete the original imme-
diately after transmission, se-
lect “Use once”. To repeated-
ly send the original, select
“Save”.
E Press
[
OK
]
.
The Transmission Mode menu is
shown. A check mark is added to
“Polling TX”.
Note
❒ To cancel the Polling Transmis-
sion, press
[
Cancel
]
. The Trans-
mission Mode menu is shown.
F Press
[
Exit
]
.
The initial display is shown.
Note
❒ “Polling TX” is displayed. If
you set up other advanced
transmission function (except
Polling Reception), “Others” is
displayed.
G Press the
{
{{
{
Start
}
}}
}
key.
Polling Transmission Clear
Report
This report allows you to verify
whether Polling Transmission has
taken place.
Limitation
❒ This report is not printed if the
User Parameters are set to allow
the stored originals to be repeated-
ly sent (Save). ⇒ P.203
“Changing
the User Parameters”
Note
❒ This report is turned on by default.
You can turn it off if you wish. ⇒
P.203
“Changing the User Parame-
ters”
❒ By default, a portion of the sent im-
age is printed on the report. You
ND1X02E7
ND1X03E0