Facsimile Operating Instructions

REGISTER/DELETE MENU
131
7
Quick Dial List
Printing the Quick Dial list allows
you to check destinations registered
in Quick Dial keys. ⇒ P.158
“RE-
PORTS/LISTS”
Deleting Quick Dials
This procedure describes how to find
a programmed Quick Dial and delete
it.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message “This desti-
nation is in use for standby
transmission file. Please modify/
delete after transmission.” is
shown and you cannot delete the
destination for this key.
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
{{
{
Fax
}
}}
}
key.
B Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
C Enter the number of the “Fax”
mode.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the function number for
“Register/Delete” using the num-
ber keys.
E Enter the function number for
“Delete QuickDial” using the
number keys.
F Press the Quick Dial key which
you want to delete.
The current contents of the key are
displayed.
Note
❒ If you press the wrong key,
press
[
No
]
then try again.
2
2
2
2
1
1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Auto Reduce/
Book 2-Sided
ND2L01E0