Facsimile Operating Instructions

INITIAL SETUP TX
159
7
INITIAL SETUP TX
When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode (Memory/Immediate
Transmission) and scanning condi-
tions (Resolution, Original Type, Im-
age Density, and Auto Image
Density).
Note
❒ You can also choose whether the
machine returns to the home set-
tings after each communication. ⇒
P.203
“Changing the User Parame-
ters”
A Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{
{{
{
Fax
}
}}
}
key.
B Press the
{
{{
{
User Tools/Counter
}
}}
}
key.
C Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D Enter the function number for
“Initial Setup TX” using the num-
ber keys.
The “Initial Setup TX” menu is
shown on the display.
E Enter a function number using
the number keys.
Note
❒ If you make a mistake, press
Cancel and enter the correct
number.
F Select the mode you want to
change using the
<
<<
<
or
>
>>
>
keys
then press
[
OK
]
.
2
2
2
2
1
1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Auto Reduce/
Book 2-Sided
ND2L01E0