Facsimile Operating Instructions

SETTING ORIGINALS
êè
2
C Select [ DF Setting ] with the <>
keys, then press the [
Select ] key.
D Select [ Mixed Sizes ] with the <>
keys, then press the [
Select ] key.
Note
❒ To deselect [ Mixed Sizes ], press
the [
Select ] key again.
E Press the [ Exit ] key.
F Align the rear and left edges of
the originals as shown in the il-
lustration.
1: Set into the document feeder
(ADF).
Important
❒ If the originals are of different
vertical sizes, put the longer
original on the bottom; other-
wise the original size might not
be detected correctly.
G Adjust the guide to the widest
original size.
H Set the aligned originals face up
into the document feeder.
Thin paper mode
Note
❒ Set to Thin Paper mode when you
place thin paper into the document
feeder; otherwise your originals
may be damaged.
A Press the { Menu } key.
ND2C0109
ND2C0109
ND2C0103
B4
A3
1
CP19AEE
1
34
2
Enhanced
Image
Menu
Series
Copies
Margin
Adjust
Auto Reduce/
Enlarge
Zoom
Combine
Copies
Erase Center/
Border
Copy
Fax
ND2L0203