Operating instructions

Copier / Document Server Features
78
3
❖ Original Orientation in Duplex Mode
You can set the original orientation when making two-sided copies.
The default setting is Top to Top.
❖ Change Initial Mode
You can select standard mode or Program No.10 as the mode effective when
power is turned on, or modes cleared.
The default setting is Standard.
❖ Max. Copy Quantity
The maximum copy quantity can be set between 1 and 999.
The default setting is 999 sheet(s).
❖ Tone: Original Remains
The beeper (key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Tone of User Tools (System Settings) is [Off] the beeper does not
sound irrespective of the Tone: Original Remains setting.
❖ Job End Call
You can choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Tone of User Tools (System Settings) settings is [On], the machine
beeps to notify you that it did not complete a job for reasons such as copying
was interrupted, the paper tray ran out of paper, or a paper jam occurred.
❖ Copy Function Key: F1-F5
You can assign frequently used functions to function keys F1 to F5.
The default setting for "Copy Function Key: F1" is 1 Sided→2 Sided: T to T.
The default setting for "Copy Function Key: F2" is 2 Sided: T to T→2 Sided: T to T.
The default setting for "Copy Function Key: F3" is 1 Sided→1 Sided Combine.
The default setting for "Copy Function Key: F4" is 1 Sided→1 Sided Com-
bine: 4 originals.
The default setting for "Copy Function Key: F5" is Create Margin.