Owner's Manual

Copying onto Custom Size Paper from the
Bypass Tray
Paper that has a horizontal length of 139.7–600.0 mm (5.50–23.62 inches) and a vertical length of
100.0–305.0 mm (3.94–12.00 inches) can be fed in from the bypass tray. Note however that the
limitation on the horizontal and vertical length range will vary depending on which options are installed.
• When prints are delivered to the trays of Finisher SR4060 or Booklet Finisher SR4070:
Horizontal length: 139.7–487.6 mm (5.50–19.19 inches), vertical length: 100.0–305.0 mm
(3.94–12.00 inches)
• When prints are delivered to the upper tray of Finisher SR4080:
Horizontal length: 139.7–458.0 mm (5.50–18.03 inches), vertical length: 100.0–305.0 mm
(3.94–12.00 inches)
• When prints are delivered to the shift tray of Finisher SR4080:
Horizontal length: 139.7–458.0 mm (5.50–18.03 inches), vertical length: 139.0–305.0 mm
(5.48–12.00 inches)
1. Load the paper face up in the bypass tray.
[Bypass] is automatically selected.
2. Press the [ ] key.
3. Press [Paper Size].
4. Press [Custom Size].
5. Enter the horizontal size with the number keys, and then press [ ].
6. Enter the vertical size with the number keys, and then press [ ].
7. Press [OK] twice.
8. Place the originals, and then press the [Start] key.
Copying onto Custom Size Paper from the Bypass Tray
61