Operating instructions

Message Explanation Recommended Action
Misfd: Dupl Unit There is a paper jam in the
duplex unit.
Remove the misfed paper.
See p.143 "Removing Misfed
Paper".
Internal Misfeed There is a paper jam in the
fusing unit.
Misfeed: PprTray There is a paper jam in Tray 1
or Tray 2.
Misfeed: Tray 1 There is a paper jam in Tray 1.
Misfeed: Tray 2 There is a paper jam in Tray 2.
Misfd: Stnd Tray There is a paper jam in the
paper exit area.
Remove paper from Bypass
Tray
The machine failed to proceed
with the print job, because tray
1 or tray 2 was specified as the
input tray but paper was set in
the bypass tray.
Remove paper from the bypass
tray.
Replace Toner: # The printer is out of toner #
(Black, Magenta, Cyan or
Yellow).
Replace the print cartridge.
See, p.99 "Replacing the Print
Cartridges".
Repl Tnr soon: # The printer is almost out of toner
# (Black, Magenta, Cyan or
Yellow).
Prepare a new print cartridge.
Replace Fusing Unit It is time to replace the Fusing
unit.
Contact your sales or service
representative.
Replace Intermdt Transfer Belt It is time to replace the transfer
belt.
Contact your sales or service
representative.
Replace Transfer Roller It is time to replace the transfer
roller.
Contact your sales or service
representative.
Replace Waste Toner Bottle It is time to replace the waste
toner bottle.
Replace the waste toner bottle
with a new one.
See p.105 "Replacing the
Waste Toner Bottle".
Error & Status Messages on the Control Panel
125
8