Operating instructions

1. Press the [Menu] key.

CER408

2. Press the [ ] or [ ] key to display [Host Interface], and then press the [OK] key.

Menu:

Host Interface

3. Press the [ ] or [ ] key to display [Network Setting], and then press the [OK] key.

Host Interface:

Network Setting

4. Press the [ ] or [ ] key to display [IPv4 Config.], and then press the [OK] key.

Network Setting:

IPv4 Config.

5. Press the [ ] or [ ] key to display [DHCP], and then press the [OK] key.

IPv4 Config.:

DHCP

6. Press the [ ] or [ ] key to select [Active], and then press the [OK] key.

DHCP:

Active

The address will be detected by the printer

7. Press the [Menu] key.

8. If you are requested to restart the printer, turn off the printer, and then turn it back on.

9. Print a configuration page to confirm the settings made.

• For details about printing the configuration page using control panel, see p.36 "Test Printing".

Ethernet Configuration