Operating instructions

2. Set the envelope in bypass tray with the printing side facing down.

CER238

3. Adjust the paper guide both sides to fit the envelope width.

CER239

• Be sure to load envelopes so that their flaps are on the right or front. If you do not, the envelopes

will become creased.

• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and

then rotate the print object by 180 degrees using the printer driver before printing. For details, see

the printer driver Help.

• For details about paper types supported by the machine, see p.57 "Paper and Other Media".

• For details about the paper settings, see p.80 "Setting a paper size using the control panel" and

p.88 "Specifying a paper type for the bypass tray".

Loading Paper