Operation Manual

DRAFT 2003/11/12
Supplementary Specifications
107
5
Supplementary Specifications
❖
❖❖
❖ Fine Directional Magnification (Additional Copy)
• When Fine Magnification is selected, depending on the pattern of original,
moire patterns may appear or image quality deteriorate.
❖
❖❖
❖ Job Preset
• Number of sheets that can be set for Job Preset and each paper size are as
follows:
• You cannot use the following functions with Job Preset:
• Recalling a Program
• Copying from the Bypass Tray
• Sort/Rotate Sort
• Image Overlay/Format Overlay
• Erase Inside/Erase Outside
• Image Repeat
• User Stamp
• Repeat User Stamp
• Sample Copy
• You cannot preset a job while a job is being sorted.
• The maximum number of jobs that can be preset is 99.
• Depending on the size of original, you may not be able to preset more jobs
even if below the maximum.
❖
❖❖
❖ Copying from the Bypass Tray
• The width for paper in the bypass tray is 210 - 914 × 2000 mm (8
1
/
2
" - 36" ×
78").
❖
❖❖
❖ Selecting Copy Paper
• If you change the paper type, copying may take longer to start.
• When Auto Paper Select is selected, copying may take slightly longer since
the machine selects the copy paper after scanning the original.
HDD installed HDD not installed
A0 50 sheets —
A1 100 sheets 2 sheets
A2 100 sheets 4 sheets
A3 100 sheets 8 sheets
A4 100 sheets 16 sheets