Operation Manual

DRAFT 2003/11/12
Specifications
108
5
❖
❖❖
❖ Sort/Rotate Sort
• You can use Sort for copy sizes up to A0(E).
• You can use Rotate Sort for copy sizes up to A0(E) (HDD installed), A1 (D)
(HDD not installed).
• You can use the following paper sizes with Rotate Sort:
• The number of originals that can be scanned for Sort and Rotate Sort is as
follows:
*1
Sort only. You cannot use A4(A) with Rotate Sort.
❖
❖❖
❖ Preset Reduce/Enlarge
• You can set the magnification ratio from 25.0 to 400.0%.
• You can select one of 8 preset ratios (4 enlargement ratios, 4 reduction ra-
tios).
• The relationship between original size and paper size enlarged/reduced
by the preset ratios is as follows:
❖
❖❖
❖ Metric version
Metric version 420 mm × 297 mm (A3)
594 mm × 420 mm (A2)
841 mm × 594 mm (A1)
515 mm × 364 mm (B3 JIS)
728 mm × 515 mm (B2 JIS)
Inch version
(Engineering)
11" × 17" (B)
17" × 22" (C)
22" × 34" (D)
Inch version
(Architecture)
12" × 18" (B)
18" × 24" (C)
24" × 36" (D)
HDD installed HDD not installed
A0(E)
*1
100 sheets 1 sheet
A1(D) 100 sheets 2 sheets
A2(C) 100 sheets 4 sheets
A3(B) 100 sheets 8 sheets
A4(A)
*1
100 sheets 17 sheets
Ratio (%) Original size → Paper size
400.0 (16 times in area ratio) A4→A0
282.8 (8 times in area ratio) A3→A0, A4→A1, B4→B1