Operation Manual

DRAFT 2003/11/12
Supplementary Specifications
111
5
• If you have used Image Repeat with the stamp function, you cannot delete
only the repeated image when using Additional Copy.
❖
❖❖
❖ Image Overlay
• When using Image Overlay, you should use a second original larger than
the first. Because the background image (first original image) will be cut if
Preset Cut is selected, and if the second original is smaller than the first.
• You cannot shift the position of the first or second original after the com-
posite image is created. To change the position, move one of the originals.
Use the composite copy itself as an original, or insert originals using the
carrier sheet.
• If you use Shift with Additional Copy after creating an Image Overlay
copy, the composite image moves. You cannot move individual original
images.
• When using the following functions, the effects are applied to the compos-
ite image created using Image Overlay.
• Shift
• Margin Adjustment
• Erase Border
• Area Selection
• Mirror Image
• Double Copies
• Image Repeat
• When you set Image Overlay with Image Repeat, the maximum size using
Image Overlay function is A0(E). However, if you create an Image Overlay
copy using A0(E)L size paper, the composite image data is lost.
❖
❖❖
❖ Format Overlay
• When selecting the programmed user format, if the sizes of the pro-
grammed user format and original to be overlaid on the programmed user
format are different, the image is created at the size of the overlaid original.
• The maximum paper size is A0 (E). However, if you create an Image Over-
lay copy using A0(E) size paper, the composite image data is lost.
ZEDG130E
Second
original
First
original
Copy