Operation Manual

DRAFT 2003/11/12
9
1. Basics
Original and Copy Output Locations
Original Output Locations
The following original output loca-
tions are available:
❖
❖❖
❖ Original Upper Output
This is the basic original output lo-
cation. Originals are ejected onto
the upper output stacker.
Note
❒ If the original is thicker than
157g/m
2
(41.8 lb.), select origi-
nal rear output.
❖
❖❖
❖ Original Rear Output
Originals are ejected onto the orig-
inal output supports. When copy-
ing thick or hard originals, select
this output location.
Original upper output
A
AA
A
Check the upper output guide
and original exit switching lever
at the machine's center rear are
both raised.
1. Upper output guide
2. Original exit switching lever
Note
❒ Remove the ejected original af-
ter it is ejected by holding its
leading edge.
Original rear output
Note
❒ When original rear output is set as
the original output location, the
copy output location is automati-
cally set to lower output.
A
AA
A
Remove the upper output stacker.
2
1
AAJ547S
AAJ502S