Operation Manual

DRAFT 2003/11/12
Basics
16
1
Placing Originals
Note
❒ Place the original after any correc-
tion fluid or ink has completely
dried. Not taking this precaution
will result in a dirtied exposure
glass and blemished copies.
❒ Dust and residue from pencil-
drawn originals can result in a
dirtied exposure glass and blem-
ished copies. We recommend us-
ing the carrier sheet for this type of
original. See p.17 “Setting the Car-
rier Sheet”.
❒ If the original's rear edge is badly
curled, smooth it out with both
hands before scanning. If the origi-
nal is inserted as is, it may be dam-
aged.
❒ When copying curled originals,
use the lower output auxiliary
guide.
Reference
For details about precautions for
originals, see p.13 “Originals”.
A
AA
A
Make sure “Set Original” lights
on the control panel.
B
BB
B
Adjust the original guides to the
size and orientation of the origi-
nal width.
Note
❒ Do not push the original guide
side fence with force.
C
CC
C
Using both hands, carefully insert
the original between the original
guides, copy side down.
Important
❒ Once originals start to feed in,
do not push or pull them. This
may damage them.
❒ After inserting an original, do
not try to handle it. Support it, if
necessary, so as not to interrupt
feeding.
ABB541S
AAJ506S
AAJ507S