Operation Manual

DRAFT 2003/11/12
Copier Functions
33
2
Reference
p.26 “Copying from the Bypass
Tray”
Related default settings:
p.85 “APS Priority”
p.85 “Ppr.Tray Priority”
Auto paper select
A
AA
A
Make sure [Auto] is selected.
Note
❒ When [Auto] is not selected, se-
lect [Auto] using the 01 keys.
Manual paper select
A
AA
A
Select paper roll tray 1, paper roll
tray 2, cut paper, or bypass tray
using the 0
00
01
11
1 keys.
The display of the selected tray is
highlighted.
-
--
-Rotate Copy
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation ( K
or L ) is different to that of the paper
set in the bypass tray, this function ro-
tates the original image by 90 degrees,
to fit it onto the copy paper.
Note
❒ This function works when Auto
Paper Select or Auto Reduce/En-
large is selected. See p.32 “Select-
ing Copy Paper” and p.39 “Auto
Reduce/Enlarge”.
❒ Rotate Copy in APS default setting
is [On]. You cannot use Rotate
Copy if this setting is changed to
[Off]. See p.88 “Rotate Copy in
APS”.
❒ You cannot use Rotate Copy when
enlarging onto A0 (E) size paper.
To do this, place originals in the K
orientation.
Setting the Length of Copy
Paper Cut
Preparation
The following paper cut methods
are available.
❖
❖❖
❖ Synchro Cut
Cuts the paper at the same
length as the original.
GCROTA0E