Operation Manual

DRAFT 2003/11/12
Troubleshooting
74
3
Streaks, scratches, or wrinkles
appear in areas of solid black.
Copy paper has been changed
from plain to translucent pa-
per, or from translucent to
plain paper.
After switching from plain to
translucent paper, wait one
minute. After switching from
translucent to plain paper,
wait two minutes before mak-
ing copies.
Shadows appear on the cop-
ies.
The original is two-sided, or
the image density setting is
too dark.
Adjust the image density set-
ting. See p.30 “Adjusting
Copy Image Density”.
Copies are blurred. Continuous copies have been
made on small sized paper.
Wait about two minutes, and
then try copying again.
Problem Causes Solutions