Operation Manual

DRAFT 2003/11/12
Settings You Can Change with User Tools
85
4
Note
❒ Default: Text
❖
❖❖
❖ Auto Density
Specifies whether or not Auto Image Density should be used after the ma-
chine is turned on, after Copier Auto Reset, or after the {
{{
{Clear Modes}
}}
} key is
pressed. See p.30 “Adjusting Copy Image Density”.
• On
• Off
Note
❒ Default: On
❖
❖❖
❖ Adj. Scan Density
Specifies one of seven density levels as the scan density.
Note
❒ Default: Center
❖
❖❖
❖ APS Priority
Specifies whether or not Auto Paper Select should be used after the machine
is turned on, after Copier Auto Reset, or after the {
{{
{Clear Modes}
}}
} key is pressed.
See p.32 “Selecting Copy Paper”.
• On
• Off
Note
❒ Default: On
❖
❖❖
❖ Ppr.Tray Priority
Specifies the default paper tray to be used after the machine is turned on, after
Copier Auto Reset, or after the {
{{
{Clear Modes}
}}
} key is pressed.
• Paper Roll1
• Paper Roll2
• Cut Paper Tray
Note
❒ Default: Paper Roll1