Service manual

TRANSFER AND PAPER TRANSPORT UNIT 30 July, 2001
3-22
3.7.3 CLEANING BLADE AND CLEANING ROLLER
1. Transfer belt cleaning unit (☛ 3.7.2 TRANSFER BELT CLEANING UNIT)
2. Front gear [A] ($ x1, 1 bearing with the bias terminal)
3. Rear gear [B] (1 hook, 1 bearing)
4. Cleaning bias roller [C]
5. Idle gear [D]
6. Bushings [E][F] (1 spring for each)
NOTE: The front and rear bushings have different springs.
Front: a long, thin, silvery spring
Rear: a short, thick, black spring
7. Cleaning blade [G] (1 bearing)
After replacing the cleaning blade, perform forced line position adjustment (SP5-
993-002 or ‘‘Maintenance menu – Color registration - Auto Adjust’ in User Program
mode).
G060R403.WMF
[E]
[A]
[G]
[B]
[C]
[D]
[F]