User Manual

Other Printing Problems
85
4
It takes too much time to com-
plete the print job.
Photographs and other data intensive pages take a long time
for the printer to process, so simply wait when printing such
data.
Changing the following settings may help to speed up print-
ing.
• PCL 5c
Select "600×600 dpi" for Resolution under the [Print Quali-
ty] tab in the printer driver's dialog box.
• PostScript
Select "1200×600 dpi" or "600×600 dpi" for Resolution un-
der the [Print Quality] tab in the printer driver's dialog box.
Select "Post Script(optimize for speed)" for PostScript
output format under the [PostScript] tab in the printer
driver's dialog box.
• RPCS
Select "1200×600 dpi" or "600×600 dpi" for Resolution un-
der the [Image Adjustments] tab in the Change Use Settings
dialog box in the printer dialog box.
Select "Speed" for Print priority under [Print Quality] tab in
the printer driver's dialog box.
For more information, see the printer driver's Help file.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data processing is
being done. Just wait until it resumes.
If "Warming Up... " appears on the panel display, the printer
is now warming up. Wait for a while.
Note
❒ To maintain the best quality, color adjustment is executed
regularly during printing or after printing. Even if print-
ing is not specified, color adjustment is sometimes exe-
cuted regularly when the power is on.
It takes too much time to resume
printing.
The data is so large or complex that it takes time to process
it. If the Data In indicator is blinking, the data processing is
being done. Just wait until it resumes.
The printer might be set to the Energy Saver mode. In the En-
ergy Saver mode, the printer has to warm up, and this takes
time until printing starts. To cancel the Energy Saver mode,
select "Off" for "Energy Saver 1" in the System Settings menu.
Multiple pages are fed through
the printer at once.
Paper misfeeds easily when the Paper Feed Roller is dirty.
Contact your sales or service representative to replace the Pa-
per Feed Roller.
Status Possible Causes, Descriptions, and Solutions
JupP1k_GB_Mainte_F_FM.book Page 85 Thursday, August 22, 2002 4:23 PM