Operating instructions

Troubleshooting
98
4
F Close the front cover.
G Turn on the main switch.
Dirt on the Front Side of Paper (Black Line/Stain)
Note
❒ If there is no margin or if there is a solid image area near the leading edge of
the original, make a margin of at least 5mm, 0.2" at the leading edge. Other-
wise, the paper exit pawl might become dirty and cause black lines on prints.
❒ Check the exposure glass cover and clean it if dirty. See p.116 “Maintaining
the Machine”.
❒ Check the exposure glass and clean it if dirty. See p.116 “Maintaining the Ma-
chine”.
❒ When black lines or stains still appear on prints even if you clean the above,
contact your service representative.
ANT059S
ANT077S
GRBLAC1E