Operating instructions

User Tools
106
5
4 Initial Settings
No. Mode Description
1 Master Making
Density
You can specify the image density that is selected by default
when the power is turned on.
Note
❒ Default: Normal
2 Original Type You can specify the original type that is selected by default when
the power is turned on.
Note
❒ Default: Text
3 Ratio You can specify the reproduction ratio that is selected by default
when the power is turned on.
Note
❒ Default: 100% (Full Size)
4 Economy Mode You can select to have Economy mode as either “On” or “Off”
when the power is turned on, or after mode settings have been
cleared.
Note
❒ Default: Off
5 Erase Border
Width
You can specify the edge erase margin.
Note
❒ Default: 5 mm, 0.2"
6 Program/
Change Class
To store settings of the Class mode, see p.51 “Storing Class Mode
Settings”.
7 Program/
Change Memory
To store settings of the Memory mode, see p.49 “Storing Normal
Memory Mode Settings” and .p.50 “Storing Stack Memory Mode
Settings”
8 Prog.Change:
Class/Year
To store settings of the Select Class/Year, see p.53 “Registering
Class/Year”.