Operating instructions

User Tools Menu
107
5
5 Mode Settings
No. Mode Description
1 Auto Cycle You can select to have Auto Cycle mode as either “On” or “Off”
when the power is turned on.
Note
❒ Default: On
2 Background
Correction
When you make prints in Photo, or Text/Photo mode, the back-
ground of the prints might appear dirty. In this case, you can se-
lect background correction to improve the clarity of your prints.
Note
❒ Default: Correct text mode only
3 Longer Pape If you are making prints on paper of custom sizes, you can set “Use”.
Note
❒ Default: Do not Use
4Combine/
Repeat Priority
You can choose to have either Combine or Repeat selected by de-
fault when the power is turned on.
Note
❒ Default: Repeat Priority
5 Cmb/Img Repeat
Sep. Line
You can specify the type of separate line of combine and repeat.
Note
❒ Default: None
6 Cancel Combine
Setting
You can specify whether Combine/Repeat mode will be auto-
matically cleared after you have finished your print job.
Note
❒ Default: Do not Cancel
7 Skip Feed You can specify the number of times that the drum rotates when
in Skip Feed mode. .
Note
❒ Default: 2 times
❒ The time can be set from 2 to 9 times.
8Memory Mode
Setting
You can choose to have either Memory mode or Stack Memory
mode as the default.
Note
❒ Default: Normal (Memory mode)
9 Auto Class Under the Class mode, the machine stops after it is finished a
Class print job. When you select Auto Class, the machine stops
for 2 seconds and then goes on to the next Class print job.
Note
❒ Default: Normal