Operating instructions

Auto Cycle
35
2
Auto Cycle
Using the default settings, you can
process masters and make prints in a
single operation. This is called "Auto
Cycle".
A Make sure the {Auto Cycle} key is
lit.
Note
❒ If it is not lit, press the {Auto Cy-
cle} key.
B Place your originals.
Reference
See p.28 “Placing Originals”.
C Make sure the {Master Making}
mode select key is lit.
Note
❒ If it is not lit, press the {Master
Making} mode select key.
D Make the necessary settings.
E Enter the required number of
prints using the number keys.
F Press the {Start} key.
Note
❒ When the print job finishes,
press the {Clear Modes} key. Pre-
viously entered job settings are
cleared.
ANT012S
ANT008S
ANT015S