Operating instructions

67
4. Troubleshooting
If Your Machine Does Not Operate as You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed. If a malfunction or a
misfeed occurs, the following messages will appear on the display.
❖ When a Message is Displayed
Message Causes Solutions
Set original.
You have not changed the origi-
nal on the exposure glass before
pressing the {Start} key.
Place the next original on the ex-
posure glass or in the ADF.
Original is not placed. Place your originals.
Set the Drum
Unit correctly.
The drum unit is not set correctly. Slide in the drum until it clicks.
Make sure that the drum is com-
pletely set in position.
Set the Master
Eject Box cor-
rectly.
The master eject box is not set
correctly.
Make sure that the master eject
box is completely set in position.
Auto-shutdown
occurred due to
power problems.
Press OK to ex-
it.
The power problem is occurred. Press {OK} key.
If it occurs frequently, contact
your customer service.