Operation Manual

184
9
Using the GPS Function
1 Check that the Bluetooth
®
GPS unit is turned on.
2 Turn the camera power on.
• The camera attempts to automatically
connect to the device and the
connection status appears. Pressing
the DISP. button cancels the
operation.
• If a passkey is required to connect to
the destination device, a message
appears prompting you to enter the
passkey. (GP.162)
• If the connection fails, an error
message appears and then the shooting screen appears. For details
about the error messages, see P.222.
• When a connection is established to a
Bluetooth
®
GPS unit, the Bluetooth
®
antenna icon, GPS information and
GPS antenna icon appear on the
shooting screen.
Disconnecting serial connection after
automatically connecting to a device ------------------------------------------------
In the Expanded Settings menu, set [BT AUTO CONN] to [OFF] (GP.183) and turn off
to disconnect serial connection. Automatic connection will not be performed when the
camera is turned on again.
Note ----------------------------------------------------------------------------------------------
To send files while connected to a Bluetooth
®
GPS unit, you must disconnect the serial
connection.
Select [PRINT] (GP.157) or [FILE SEND]
(GP.166, P.209) on the Playback Setting
menu to display the screen confirming whether to
disconnect the serial connection. Select [YES]
and press the MENU/OK button to disconnect the
serial connection.
Automatically Establishing a Connection