Owner's Manual

119
Installing Software
Connecting the Camera to Your Computer
After installing the software on your computer, connect your camera
to it.
1. Make sure the camera power is off.
2. Connect the USB cable to the
USB port of your computer.
3. Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.
For Windows XP
The first time you connect your camera to the computer using a USB
cable, the [Found New Hardware Wizard] screen will appear.
1. Select [Install from a list or
specific location (Advanced)].
2. Select [Next].
3. Select [Search for the best driver
in these locations.] -[Include this
location in the search] and then
press the [Browse] button.