Camera User Guide Caplio R40

115
Changing Camera Settings
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below:
1. Display the SETUP menu.
For the operating procedure, see P.109.
2. Press the " button to select [BEEP SOUND] and press the
$ button.
3. Press the !" buttons to select
the desired setting.
4. Press the C/D or # button.
5. If you pressed the # button in
Step 4, press also the C/D
button.
This setting is used until it is changed.
Reference
For information on how to adjust the volume, see P.116
Start sound: Sound when the camera is turned on.
Shutter release sound: Sound when the shutter release button is pressed.
Focus sound: Sound when the shutter release button is half-pressed and the camera focuses
on the subject.
Beep Sound: Error sound indicating an operation that cannot be performed.
Available Settings
SHUTTER (Shutter release sound, Beep Sound)
ALL (all sounds on) *Default setting