Camera User Guide Caplio R40

145
Installing Software
3. Select [RICOH Gate La], check
[Always use this program for this
action] check box, and then click
[OK].
To load images from the camera with
assistance from the Windows XP “Scanner and Camera Wizard”, select
[Microsoft Scanner and Camera Wizard].
Leaving the [Always use this program for this action] check box
unchecked will cause the [Caplio R4] screen to be displayed each time
you transfer images from the camera, thereby allowing you to choose
whether to use [RICOH Gate La] or the [Microsoft Scanner and Camera
Wizard] for image transfers.
If your PC is installed with Windows XP Service Pack 2 and a warning
message is displayed, see P.165.
Disconnecting the Camera from Your Computer:
1. Turn your camera off by pressing the POWER button.
2. Unplug the USB cable.
Note
• If the computer does not recognize the camera, uninstall the software (P.151) and install it
again.
• When downloading images from your camera, be sure to use a fully charged rechargeable
battery in the camera. Use of the AC adapter (sold separately) is recommended.
Reference
• For how to turn the camera on/off, see P.22.
• For details about [USB CONNECTION] (MASS STR/ORIGINAL), see P.125.