Instruction manual

19
Connecting the Camera to a Macintosh
2
You can connect the camera to a Macintosh using the USB
cable.
1 Turn the Macintosh on.
When the desktop is displayed, RICOH Gate will start
up and the RICOH Gate window will be displayed.
2 Check that the camera is turned off and
connect the AC adapter to the camera.
3 Connect the USB cable to the DIGITAL
(AV/USB) terminal on the camera and
the USB port on the Macintosh.
4 Check that the mode dial on the camera
is not set to (motion picture).
If the mode dial is set to (motion picture), switch
to another mode.
5 Turn the camera on.
The camera is now in PC connection mode.
mm
mm
See "Starting Up RICOH Gate" (p.21).
To automatically save images using the
START key
By connecting the RICOH BASE to the camera and
pressing the START key, you can download files
saved in the camera automatically to the Macintosh.
mm
mm
See "Automatically Saving Files Using the START
key" (p.31).
Connecting the Camera to a Macintosh
Tips
• If the power cuts out during
operation, the camera and
the Macintosh may be
adversely affected. You are
therefore recommended to
avoid powering the camera
by the battery and to use the
AC adapter.
Important